Hard limit on DoD setting?

[asdfkid]

I've recently setup the GoodWe experimental integration with a GEH-10 (General Electric rebadged GoodWe) and LR RESU16H Prime battery. This battery advertises having 100% of it's energy usable, so a Depth of Discharge of 100% (I won't get into whether that's good for battery longevity - probably not). However the integration appears to have a hard limit of 95% (ie 5% remaining). If I set something lower than that using goodwe.set_parameter service it completes ok, but then the message below is returned from the goodwe_get_parameter service:

"Failed to call service goodwe.get_parameter. Invalid value for input_number.battery_dod_limit: 4.0 (range 5.0 - 20.0). Got {'type': 'execute_script', 'sequence': [{'service': 'goodwe.get_parameter', 'data': {'device_id': '8b2a201be4, 'entity_id': 'input_number.battery_dod_limit', 'parameter': 'battery_discharge_depth'}}], 'id': 45}"

(see #109 - lower limits appear to be set but actually don't apply)

Is it possible to make the limit 0% or 1%, or is that too risky?

[asdfkid]

never mind, figured it out. It was the limitation on the input_number that the response was being stored in rather than the DoD value itself.