Advanced Usage

Working directory

We always call snakemake from within the grenepipe directory, because this is where it is looking for the code run the pipeline. However, that typically is not the directory where you want to store your data. Hence, we need to tell snakemake where to find the config.yaml file of your run.

To this end, we use the the snakemake --directory option, which specifies the directory where your config.yaml file is, and to which output files will be written:

snakemake [other options] --directory /path/to/my-analysis

That is, we are still calling snakemake from the directory where you downloaded grenepipe to, but we specify a --directory, telling Snakemake where to find the the config file and where to put the output files.

Our typical (recommended) setup looks as follows:

• For a new project/analysis, create a new directory. In that directory:
• Create a samples.tsv table, listing all fastq file paths (which can be located wherever, depending on your preferences), for example by using the generate-table.py script. Note that your actual sequence data (fastq) files do not need to be stored there as well - and we even recommend to not have them stored with your analysis. They can be in some safe storage on your cluster, and only need to be referenced from the samples table.
• Copy the config.yaml into that directory as well, and edit as needed. In particular, edit the path to the samples.tsv table, and to the reference genome (which also can be located wherever).
• Run the pipeline by calling snakemake from the directory where you downloaded grenepipe to, and specify the --directory to point to our newly created directory (the one with the samples.tsv and config.yaml in it).

This puts all your results and outputs in that new directory, which also includes the configuration (good for reproducibility).

Using a different --directory for each run will also easily allow you to repeat analyses with different tools and parameters, which is useful for data exploration. You will only need to create a new config.yaml file per run, each in a separate directory, specify your settings, and start the pipeline.

Re-using conda environments

With the typical setup, snakemake unfortunately stores all conda environments inside the specified --directory. That means, all conda environments are downloaded again and again for each --directory (i.e., each run of the pipeline) that we use. This is of course not desirable (and it is mysterious why snakemake behaves that way), so let's avoid that by setting

snakemake [other options] --conda-prefix ~/path/to/my/software/conda-envs

This stores all conda environments in the specified directory. This can be in your home directory (~/conda-envs) for example. Just make sure to use the same prefix for every run.

Running only parts of the pipeline

Sometimes, you do not want to run all steps of the pipeline. To this end, we offer some shortcuts:

• Only run the reference genome preparation step.

  snakemake [other options] all_prep
  

  This can be useful if you want to start several runs of grenepipe with the same reference genome, but different config files (e.g., for exploring the effects of different tools and parameters). In that case, if you started all runs at the same time, they would all be trying to process the reference genome simultaneously, which might lead to corrupt files. Running the preparation step once before makes sure that all later runs already have the necessary index files etc, and do not try to create them again, thus avoiding clashes.

• Only run quality control, see also this page.

  snakemake [other options] all_qc
  

  This will produce all quality control statistics, including the MultiQC report. Note that this might still need to run the whole variant calling if you activated SnpEff or VEP, or bcftools stats (activated by default), as those will be included in the MultiQC report, and they depend on the variants. Deactivate them in the config to avoid this.

• Only run the mapping, to get a set of bam files.

  snakemake [other options] all_bams
  

  This will yield all bam files that are requested in the config, i.e., just the sorted bams, the samtools filtered bams (e.g., for ancient DNA), the duplicate-marked bams, or the base quality recalibrated bams, in their respective output directories.

  Furthermore, a set of merged bam files is produced in mapping-merged, where each file is one sample, merging all its units. The input for this merging step is the respective last of the previously mentioned steps as requested in the config file. That is, for example, wit filtering and duplicate marking, but without base quality recalibration, the input for this merging are the duplicate-marked bams. That means, these merged bam files represent the same data that would also be used for variant calling downstream (if that part of the pipeline is being run).

• Only run the mapping, and mpileup creation.

  snakemake [other options] all_pileups
  

  This is the same as the above all_bams step, but additionally creates the mpileup files as specified in the config "settings:pileups" list. Note that in order for this target to do anything at all, at least one of the pileup options has to be activated in the config file.

Furthermore, snakemake offers to just run certain rules, and has some other tricks up its sleeve, see their command line interface for details.

Ancient DNA (aDNA)

A more advanced use case is that of ancient DNA. In that case, similar to the above section, we usually do not want to run the whole pipeline - variant calling might not be of interest. Instead, typically, we want to run all steps prior to the usual calling step, that is, trimming, mapping, duplicate removal, and furthermore the damage control tools.

To achieve that, we can use the same above methods of running only parts of the pipeline. Two approaches are to run either all_bams or all_qc, as explained in the section above. The former will only run everything up until (and including) the mapping, with all its associated steps (clipping, duplicate removal, base recalibration) as far as those steps are activated in the config.yaml. The latter will additionally run the QC steps, which also include the two damage profiling tools (mapdamage and damageprofiler) if those are activated in the config.yaml.

Note however that by default (as of now), the optional bcftools-stats step is activated in the config.yaml, which requires the filtered VCF as input. Hence, if you want to run the QC steps, but without any VCF-related steps, you need to deactivate bcftools-stats. Before submitting any large jobs to the cluster, we recommend to run snakemake [other options] -nq, which is a dry run summary that lists all steps that would be executed - and use this to check that only the intended steps are being listed. You can further use snakemake [other options] -n --reason to list the reason for every step being run, if you need to investigate why certain steps are listed.

Frequency calling from pool-seq data with HAF-pipe

Although grenepipe is to a large extend about calling variants from sequenced individuals, we also offer tools that are useful for pool-sequencing data, where each sample is obtained from genetic material of a whole pool of individuals (of the same species). This can be a cost effective way to assess diversity and changes in allele frequencies, for example in Evolve and Resequence experiments. See for example here for some details and experiments with that approach.

For obtaining allele frequencies from pool-seq data, we typically do not need to execute the variant calling step. Instead, we use the mapped reads, and work from there. For each sample - representing a pool of individuals - we could just count the bases at each position, and compute the frequency of any alternative base compared to the reference base (based on the reference genome). See again here for comparisons of different approaches and their upsides and downsides.

However, in many types of experiments where populations are sequenced over multiple generations, we often have a founder generation of individuals that we can use to improve the statistical quality of the frequencies. In grenepipe, we offer to run HAF-pipe, which is a tool to calculate haplotype-inferred allele frequencies from pool-seq data and founder SNP profiles.

After setting the necessary files and parameters in the hafpipe section of the config.yaml, run

snakemake [other options] all_hafpipe

to obtain the frequency files. We improve upon the original HAF-pipe, which outputs individual files per sample and per chromosome, by creating a combined table containing all frequencies in the file "hafpipe/all.csv".

See the hafpipe section in the config.yaml for more details and information.

Un-assembled reference genomes with many contigs/scaffolds

For some reference genomes, not all chromosomes/contigs have been fully assembled yet, and instead the reference genome consists of many small contigs/scaffolds. As some of the steps in the workflow however parallelize over contigs (for speed), this can lead to a large number of jobs being created, which in particular can cause issues when running in cluster environments. It will slow down the snakemake execution itself, but also might start hundreds of thousands of jobs, which is rarely a good idea.

To solve this issue, use the setting contig-group-size in the config.yaml. See there for more details and an explanation of how this feature works. In short, it runs the computation for several contigs in a single job, without however affecting the produced output.

Cluster environments with different file system partitions

Many clusters have different file system partitions, intended for different use cases. Often, there is long-term storage (typically backed-up), and so-called scratch space, which is meant for faster file access. This temporary storage is often recommended for fast access of large files - such as what we need in grenepipe.

Hence, when your cluster offers such a scratch partition, we recommend to copy your input fastq files onto this partition (typically, you want to copy instead of move, to ensure that a backed-up version of the files remains). To this end, you can use the tools/copy-samples.py script. The script also allows to clean up sample and file names with invalid or difficult characters, which might be useful as well.

Furthermore, it is recommended to use a working directory for running grenepipe that is also located on that scratch space, for the same reasons. See above for details on this.