TODO.txt

PID Description                  Number of bytes  Scale   Offset   Units
                                 returned
05  Engine Coolant Temperature   1 byte           1       -40      oC
0A  Fuel Pressure                1 byte           3                kPa
0B  Intake Manifold Pressure     1 byte           1                kPa
0C  Engine RPM                   2 bytes          0.25             rpm
0D  Vehicle speed                1 byte           1                km/h
0E  Timing advance               1 byte           0.5     -64      degrees  
0F  Intake air temperature       1 byte           1       -40      oC
10  MAF air flow rate            2 bytes          0.01             g/s
11  Throttle position            1 byte           0.3922           %
1F  Run time since engine start  2 bytes          1                s
23  Fuel Pressure (diesel)       1 byte           3                kPa
2F  Fuel Level Input             1 byte           0.3922           %
33  Barometric pressure	         1 byte           1                kPa
46  Ambient air temperature      1 byte           1       -40      oC



-------
46 - Ambient air temperature?
	X - NO DATA
F0 - fuel consumption?
	41 F0 82 00 
03 - fuel system status?
	41 03 02 00 
11 - Throttle position
	41 11 1A 
0A - Fuel pressure
	41 A0 04 01 
0F - Intake air temperature
	41 0F 3F -> 73.4 F
-------






Brightness
Alerts
Write mode to file
Fix crash on close

Trip timer - start write to file
Dead-reconing trip distance?
Set the clock 



Alarms:

Coolant temp
Battery voltage - running & not running
Redline - 5500 http://www.customtacos.com/forum/22-off-topic/4897-2-4l-2rz-redline-max-torque-max-hp.html
Fuel system status?
Codes?



Crash backtrace:
https://oroboro.com/stack-trace-on-crash/




Press two buttons at the same time for static IP

(Go to DHCP)

sudo ifconfig eth0 0.0.0.0 0.0.0.0
sudo dhclient




C++ concurrency:
https://baptiste-wicht.com/posts/2012/07/c11-concurrency-tutorial-part-4-atomic-type.html

Atomics:
http://www.modernescpp.com/index.php/the-atomic-boolean

Python inter-op:
https://www.boost.org/doc/libs/1_49_0/libs/python/doc/tutorial/doc/html/python/hello.html

BUTTON SHIM SOURCE:
https://github.com/pimoroni/button-shim/blob/master/library/buttonshim/__init__.py