How to create an own adapter? #47

necroware · 2023-01-31T19:21:53Z

It is then relatively easy for most hobby/amateur-tinkers to solder the parts by hand as it only has very few simple component, see:

https://www.youtube.com/watch?v=HUmbvfqP784&ab_channel=chadaustinak

Ordering prototype PCB and assembling yourself

As this is open-source hardware you should know as an option that it is today relatively easy (and inexpensive) to just submit the KiCad PCB layout files directly to some PCB-prototype board manufacturers like Oshpark or PCBWay who will take it then make + ship a few of the PCB boards to you, all without you having to use KiCad yourself or even having to understand the PCB layout:

https://oshpark.com
- See example shared project (rev 0.2.1 of the board) -> https://oshpark.com/shared_projects/rzwJjMoP
https://www.pcbway.com
https://jlcpcb.com

FYI, Chinese PCB manufacturers will usually make around 20 simple PCB board like this for less than $10 and ship them to you for around $20, so depending on your country's import tax you have those at home for around $30-40 in around a months time.

E.i. just buy the ones from the project BOM (Bill-Of-Matierials) list

https://github.com/necroware/gameport-adapter/blob/main/README.md#bill-of-materials-bom

Note! It is not recommended to buy the Mini-USB variant of Arduino Pro Micro as its header is wider than USB-C and Micro-USB variants), and it is not recommended to buy the Micro-USB variant of Arduino Pro Micro as it is too easy to break the connector.

Bill of materials (BOM)

The hardware is super simple. To build an adapter you'll need the PCB from this project and following parts:

Part	Qty	LCSC #	Digikey #	Mouser Electronics #	Comment
CONN1	1	C77835	609-5371-ND	523-L77SDA15SA4CH4F	DB15 female connector
R1..R4	4	C172965	13-MFR-25FTE52-100KCT-ND	603-MFR-25FTE52-100K	100 kOhm resistors
SW1	1	C15781	2449-KG04ET-ND	642-DS04T	DIP-4 switch
U1	1	C72120	ED3051-5-ND	649-DILB24P-223TLF	DIP24 Socket (optional)
U1	1	N/A	1568-1060-ND	474-DEV-12640	Arduino Pro Micro (ATmega32U4 16MHz, 5V), including two 12 pin header connectors, MicroUSB version (see "Known issues")

Tip! Some other user recommended buying an enclosure case: Hammond Manufacturing 1551RTBU, Digi-Key Part # HM1142-ND.

You can otherwise 3D-print your own case, see example -> https://www.thingiverse.com/thing:5457006

Firmware

Once you have it and want to flash the firmware yourself (to ensure you have the latest version), you can do that yourself as well.

Download source code files from -> https://github.com/necroware/gameport-adapter/tree/main/firmware/gameport-adapter
Download the Arduino IDE from -> https://www.arduino.cc/en/software
Connect the Adapter with your USB cable.
Open "gameport-adapter.ino" included in the source files.
In "Tools" -> Port -> select the virtual COM port that says (Arduino Micro).
In "Sketch" -> select "Upload" which will compile the firmware and upload it to the Arduino.
You are done.

Originally posted by @Hedda in #12 (comment)

Hedda · 2023-01-31T19:58:31Z

As this is open-source hardware you should know as an option that it is today relatively easy (and inexpensive) to just submit the KiCad PCB layout files directly to some PCB-prototype board manufacturers like Oshpark or PCBWay who will take it then make + ship a few of the PCB boards to you, all without you having to use KiCad yourself or even having to understand the PCB layout:

https://oshpark.com

See example shared project (rev 0.2.1 of the board) -> https://oshpark.com/shared_projects/rzwJjMoP

https://www.pcbway.com

FYI, today a few of those and other PCB manufacturers (including Oshpark and PCBWay) have communities / community website that allows anyone to create and share projects similar to the linked shared project on Oshpark, and doing so can help make it even easier for less experienced people that might be new to that part of the hobby to order their own PCB board directly.

https://oshpark.com/shared_projects
https://oshpark.com/shared_projects/rzwJjMoP

https://www.pcbway.com/blog/help_center/How_to_Share_Projects_in_PCBWay_Community_d27959dc.html
https://www.pcbway.com/project/
https://www.pcbway.com/project/shareproject/

PCBWay is probably the currently largest at driving its community projects and the part of its store for sharing your projects.

PS: PCBWay also offer 3D-printing services in case want to have an enclosure like https://www.thingiverse.com/thing:5457006

creopard · 2023-01-31T20:01:30Z

Also make sure to get the right Arduino board, as they may differ in width:
https://www.youtube.com/watch?v=0losEHACB6A

Hedda · 2023-01-31T20:20:50Z

Oh, btw, most open-source hardware licenses allow anyone to make the board to then resell the board and/or product, see ex:

PS: Open-source hardware licenses does however usually not extend to the copyrighted name of the creator or an unique name that the original creator has given to the project/product, so it would normally not be allowed to market and sell it as "Necroware" product, hence a disclaimer is usually used by others to inform that it is not official or sold by the original creator.

Hedda · 2023-01-31T20:25:46Z

@necroware You might want to consider enabling the GitHub Discussions for this repository (GitHub collaborative communication forum feature for repositories) and move this there as it allows for collaboration threads without clogging up the issues section:

https://docs.github.com/en/discussions/quickstart

https://docs.github.com/en/discussions

https://github.com/features/discussions

See examples:

https://github.com/community/community/discussions

https://github.com/orgs/community/discussions/categories/discussions

Lowe0 · 2023-02-09T15:03:01Z

I've built a few of these using boards from OSHpark. They work pretty well, although the resistors can be a bit of a pain. I think a lead-forming tool will help a lot with that.

Edit: nope, a lead-forming tool doesn't help. The commonly available ones only go down to 0.4"; the resistor holes on this design are spaced 0.3". This probably makes sense for machine assembly, but for hand assembly, 0.3" for a resistor that's 0.25" without any leads at all is super-tight.

I'm not an electrical engineer, so I can't say what the impact would be functionally, but for hand assembly, an extra 0.1" on the resistor through hole would be a massive help. It looks like there's room for it, too. Thoughts, @necroware ?

Hedda · 2023-02-13T07:34:55Z

Ordering prototype PCB and assembling yourself

As this is open-source hardware you should know as an option that it is today relatively easy (and inexpensive) to just submit the KiCad PCB layout files directly to some PCB-prototype board manufacturers like Oshpark or PCBWay who will take it then make + ship a few of the PCB boards to you, all without you having to use KiCad yourself or even having to understand the PCB layout:

https://oshpark.com

See example shared project (rev 0.2.1 of the board) -> https://oshpark.com/shared_projects/rzwJjMoP

https://www.pcbway.com

https://jlcpcb.com

FYI, Chinese PCB manufacturers will usually make around 20 simple PCB board like this for less than $10 and ship them to you for around $20, so depending on your country's import tax you have those at home for around $30-40 in around a months time.

E.i. just buy the ones from the project BOM (Bill-Of-Matierials) list

https://github.com/necroware/gameport-adapter/blob/main/README.md#bill-of-materials-bom

Tip on other one-stop-shop turnkey PCB and embedded circuit board manufacturers partners which offer open project pages:

Seeed Studio (Seeed Technology) https://www.seeedstudio.com
Elecrow https://www.elecrow.com
PCBgogo https://www.pcbgogo.com
Makerfabs https://www.makerfabs.com
OSpcb https://www.cnospcb.com

Hedda · 2023-02-28T14:13:01Z

Recommend moving this to wiki and/or discussions -> https://github.com/necroware/gameport-adapter/discussions

https://docs.github.com/en/communities/documenting-your-project-with-wikis/about-wikis

https://docs.github.com/en/communities/documenting-your-project-with-wikis

https://docs.github.com/en/communities/documenting-your-project-with-wikis/adding-or-editing-wiki-pages

necroware · 2023-02-28T14:22:11Z

Done.

Hedda · 2023-04-17T12:05:03Z

@necroware Recommend moving this to the suggestion section under discussions -> https://github.com/necroware/gameport-adapter/discussions

necroware closed this as completed Feb 28, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

How to create an own adapter? #47

How to create an own adapter? #47

necroware commented Jan 31, 2023 •

edited

Loading

Hedda commented Jan 31, 2023 •

edited

Loading

creopard commented Jan 31, 2023

Hedda commented Jan 31, 2023

Hedda commented Jan 31, 2023 •

edited

Loading

Lowe0 commented Feb 9, 2023 •

edited

Loading

Hedda commented Feb 13, 2023

Ordering prototype PCB and assembling yourself

Hedda commented Feb 28, 2023

necroware commented Feb 28, 2023

Hedda commented Apr 17, 2023 •

edited

Loading

How to create an own adapter? #47

How to create an own adapter? #47

Comments

necroware commented Jan 31, 2023 • edited Loading

Ordering prototype PCB and assembling yourself

Bill of materials (BOM)

Firmware

Hedda commented Jan 31, 2023 • edited Loading

creopard commented Jan 31, 2023

Hedda commented Jan 31, 2023

Hedda commented Jan 31, 2023 • edited Loading

Lowe0 commented Feb 9, 2023 • edited Loading

Hedda commented Feb 13, 2023

Ordering prototype PCB and assembling yourself

Hedda commented Feb 28, 2023

necroware commented Feb 28, 2023

Hedda commented Apr 17, 2023 • edited Loading

necroware commented Jan 31, 2023 •

edited

Loading

Hedda commented Jan 31, 2023 •

edited

Loading

Hedda commented Jan 31, 2023 •

edited

Loading

Lowe0 commented Feb 9, 2023 •

edited

Loading

Hedda commented Apr 17, 2023 •

edited

Loading