"Bear in a Datacenter Edition"
FreeBSD bhyve manager utilizing ZFS and other FreeBSD tools. Over the hill to 1.0
iohyve creates, stores, manages, and launches bhyve guests utilizing built in FreeBSD features. The idea is based on iocage, a jail manager utilizing some of the same principles.
DO YOU EVEN MAN PAGE?
man iohyve # Installs with 'make install'
cat iohyve.8.txt | less # Quick and dirty txt file
Pre-Flight Checklist
As of v0.7 iohyve takes care of setting up your machine if you let it.
Once you have created your ZFS pool named 'tank' you can run:
iohyve setup pool=tank
If you want iohyve to take care of networking, so you don't have to set up rc.conf you can do the following:
iohyve setup net=em0 # 'em0' is the interface I want bridge0 attached to.
You can even have iohyve load the required kernel modules:
iohyve setup kmod=1
You can also do all of the above at once:
iohyve setup pool=tank kmod=1 net=em0
If you want iohyve to set up the kernel modules and bridge0 every time you boot, add these lines to /etc/rc.conf:
iohyve_enable="YES"
iohyve_flags="kmod=1 net=em0"
If you want more control over your setup, feel free to read the handbook.
Usage
iohyve
version
setup pool=[poolname] kmod=[0/1] net=[interface]
list
info [-d]
isolist
fwlist
fetch [URL]
cpiso [path]
renameiso [ISO] [newname]
rmiso [ISO]
fetchfw [URL]
cpfw [path]
renamefw [firmware] [newname]
rmfw [firmware]
create [name] [size]
install [name] [ISO]
load [name] [path/to/bootdisk]
boot [name] [runmode] [pcidevices]
start [name] [-s | -a]
stop [name]
forcekill [name]
scram
destroy [name]
rename [name] [newname]
delete [name]
set [name] [prop1=value] [prop2=value]...
get [name] [prop]
getall [name]
add [name] [size]
remove [name] [diskN]
resize [name] [diskN] [size]
disks [name]
snap [name]@[snapshotname]
roll [name]@[snapshotname]
clone [name] [clonename]
snaplist
taplist
activetaps
conlist
console [name]
conreset
help
General Usage
List all guests created with:
iohyve list
You can change guest properties by using set:
iohyve set bsdguest ram=512M #set ram to 512 Megabytes
iohyve set bsdguest cpu=1 #set cpus to 1 core
iohyve set bsdguest pcidev:1=passthru,2/0/0 #pass through a pci device
You can also set more than one property at once:
iohyve set bsdguest tap=tap0 con=nmdm0 #set tap0 and nmdm0
You can also set a description that can be a double quoted (") string with no equals sign (=).
All spaces are turned into underscores (_). At guest creation, the description is the output of date
iohyve set bsdguest description="This is my string"
It's always prudent to destroy a guest before changing settings that may affect a running guest.
It's also a good idea to destroy a guest after your installation phase has completed.
Destroying a guest does not delete a guest from the host, it destroys the guest in VMM.
iohyve destroy bsdguest
Get a specific guest property:
iohyve get bsdguest ram
Get all guest properties:
iohyve getall bsdguest
Do cool ZFS stuff to a guest:
#Take a snapshot of a guest.
iohyve snap bsdguest@beforeupdate #take snapshot
iohyve snaplist #list snapshots
iohyve roll bsdguest@beforeupdate #rollback to snapshot
# Make an independent clone of a guest
# This is not a zfs clone, but a true copy of a dataset
iohyve clone bsdguest dolly #make a clone of bsdguest to dolly
FreeBSD Guests
Fetch FreeBSD install ISO for later:
iohyve fetch ftp://ftp.freebsd.org/.../10.1/FreeBSD-10.1-RELEASE-amd64-bootonly.iso
Rename the ISO if you would like:
iohyve renameiso FreeBSD-10.1-RELEASE-amd64-bootonly.iso fbsd10.iso
Create a new FreeBSD guest named bsdguest with an 8Gigabyte virtual HDD:
iohyve create bsdguest 8G
List ISO's:
iohyve isolist
Install the FreeBSD guest bsdguest:
iohyve install bsdguest FreeBSD-10.1-RELEASE-amd64-bootonly.iso
Console into the installation:
iohyve console bsdguest
Once installation is done, exit console (~~.) and stop guest:
iohyve stop bsdguest
Now that the guest is installed, it can be started like usual:
iohyve start bsdguest
Some guest os's can be gracefully stopped:
iohyve stop bsdguest
If you are having problems with a guest that is unresponsive you can forcekill it as a last resort. USE THIS WITH CAUTION, IT WILL KILL ALL PROCESSES THAT MATCH THE NAME OF THE GUEST.
iohyve forcekill grubguest
Other BSDs:
Try out OpenBSD:
iohyve set obsdguest loader=grub-bhyve os=openbsd58
iohyve install obsdguest install58.iso
iohyve console obsdguest
Try out NetBSD:
iohyve set nbsdguest loader=grub-bhyve
iohyve set nbsdguest os=netbsd
iohyve install nbsdguest NetBSD-6.1.5-amd64.iso
iohyve console nbsdguest
Linux flavors:
Try out Debian or Ubuntu (note LVM installs should work with os=d8lvm):
iohyve set debguest loader=grub-bhyve
iohyve set debguest os=debian
iohyve install debguest debian-8.2.0-amd64-i386-netinst.iso
iohyve console debguest
Try out ArchLinux:
iohyve set archguest loader=grub-bhyve
iohyve set archguest os=arch
iohyve install archguest archlinux-2015.10.01-dual.iso
iohyve console archguest