Replies: 3 comments
-
Hi @Jkirjo, if you get only the update log message, its an indication that there is not data incoming. First check the https://github.com/lanwin/esphome_samsung_ac?tab=readme-ov-file#troubleshooting section and try the bottom to dump anything coming from serial connection. Please also change the log level to If there still nothing is in you log, the I would suggest to review the documentation of your ESP and check if your have tx_pin and rx_pin to the right GPIOs. |
Beta Was this translation helpful? Give feedback.
-
Thanks. |
Beta Was this translation helpful? Give feedback.
-
Fixed, my own mistake. There was earlier some other error and i tried to switch tx and rx pins for test. And ofcourse forget switch them back correct pins. Now i got addresses to indoor and outdoor units. Outdoor 10.00.00 and indoor 20.00.00 |
Beta Was this translation helpful? Give feedback.
-
Tried hours and hours now. Anything seems not make a change.
I have Atom S3 lite and Atom rs-485 tail, changed rx and tx pins to correct. And my Samsung device is in compatible list. As in header, i only get always that yellow log message "update". Reversed data wires, tried lower baudrate and many other modification, no success.
Sorry my english.
There are many lines in exsample.yaml, which are not allowed to compiler without removing or modify. Impossible to install, when get error. I'll try to add my latest "first run" yaml, if somebody can see, what is wrong. I have tried dozens of different versions, all is not allowed or don't work, if compiler allows it. I have no idea anymore.
Beta Was this translation helpful? Give feedback.
All reactions