-
Notifications
You must be signed in to change notification settings - Fork 151
encap_decap_scale
Github Action edited this page Nov 20, 2024
·
3 revisions
Introduce encapsulation and decapsulation scale test on top of TE-14.1
Use the same topology as TE-14.1
# DSCP value that will be matched to ENCAP_TE_VRF_A
* dscp_encap_a_1 = 10
* dscp_encap_a_2 = 18
# DSCP value that will be matched to ENCAP_TE_VRF_B
* dscp_encap_b_1 = 20
* dscp_encap_b_2 = 28
# DSCP value that will be matched to ENCAP_TE_VRF_C
* dscp_encap_c_1 = 30
* dscp_encap_c_2 = 38
# DSCP value that will be matched to ENCAP_TE_VRF_D
* dscp_encap_d_1 = 40
* dscp_encap_d_2 = 48
# Magic source IP addresses used in VRF selection policy
* ipv4_outer_src_111 = 198.51.100.111
* ipv4_outer_src_222 = 198.51.100.222
# Magic destination MAC address
* magic_mac = 02:00:00:00:00:01
- Build the same scale setup as TE-14.1.
- Apply
vrf_selection_policy_wto DUT port-1.
vrf_selection_policy_w
network-instances {
network-instance {
name: DEFAULT
policy-forwarding {
policies {
policy {
policy-id: "vrf_selection_policy_w"
rules {
rule {
sequence-id: 1
ipv4 {
protocol: 4
dscp-set: [dscp_encap_a_1, dscp_encap_a_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_A"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 2
ipv4 {
protocol: 41
dscp-set: [dscp_encap_a_1, dscp_encap_a_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_A"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 3
ipv4 {
protocol: 4
dscp-set: [dscp_encap_a_1, dscp_encap_a_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_A"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 4
ipv4 {
protocol: 41
dscp-set: [dscp_encap_a_1, dscp_encap_a_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_A"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 5
ipv4 {
protocol: 4
dscp-set: [dscp_encap_b_1, dscp_encap_b_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_B"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 6
ipv4 {
protocol: 41
dscp-set: [dscp_encap_b_1, dscp_encap_b_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_B"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 7
ipv4 {
protocol: 4
dscp-set: [dscp_encap_b_1, dscp_encap_b_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_B"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 8
ipv4 {
protocol: 41
dscp-set: [dscp_encap_b_1, dscp_encap_b_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_B"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 9
ipv4 {
protocol: 4
dscp-set: [dscp_encap_c_1, dscp_encap_c_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_C"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 10
ipv4 {
protocol: 41
dscp-set: [dscp_encap_c_1, dscp_encap_c_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_C"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 11
ipv4 {
protocol: 4
dscp-set: [dscp_encap_c_1, dscp_encap_c_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_C"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 12
ipv4 {
protocol: 41
dscp-set: [dscp_encap_c_1, dscp_encap_c_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_C"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 13
ipv4 {
protocol: 4
dscp-set: [dscp_encap_d_1, dscp_encap_d_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_D"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 14
ipv4 {
protocol: 41
dscp-set: [dscp_encap_d_1, dscp_encap_d_2]
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_D"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 15
ipv4 {
protocol: 4
dscp-set: [dscp_encap_d_1, dscp_encap_d_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_D"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 16
ipv4 {
protocol: 41
dscp-set: [dscp_encap_d_1, dscp_encap_d_2]
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "ENCAP_TE_VRF_D"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 17
ipv4 {
protocol: 4
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "DEFAULT"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 18
ipv4 {
protocol: 41
source-address: "ipv4_outer_src_222"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "DEFAULT"
decap-fallback-network-instance: "TE_VRF_222"
}
}
rule {
sequence-id: 19
ipv4 {
protocol: 4
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "DEFAULT"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 20
ipv4 {
protocol: 41
source-address: "ipv4_outer_src_111"
}
action {
decap-network-instance: "DECAP_TE_VRF"
post-network-instance: "DEFAULT"
decap-fallback-network-instance: "TE_VRF_111"
}
}
rule {
sequence-id: 21
action {
network-instance: "DEFAULT"
}
}
}
}
}
}
}
}
-
via gRIBI installs the following AFT entries:
- Add 4 VRFs for encapsulations:
ENCAP_TE_VRF_A,ENCAP_TE_VRF_B,ENCAP_TE_VRF_CandENCAP_TE_VRF_D. - Add 1 VRF for decapsulation,
DECAP_TE_VRF. - Add 2 Tunnel VRFs,
TE_VRF_111andTE_VRF_222. - Inject 5000 IPv4Entry-ies and 5000 IPv6Entry-ies to each of the 4 encap VRFs.
- The entries in the encap VRFs should point to NextHopGroups in the
DEFAULTVRF. Inject 800 such NextHopGroups in the DEFAULT VRF. - Each NextHopGroup should have 8 NextHops where each NextHop points to a tunnel in the
TE_VRF_111. In addition, the weights specified in the NextHopGroup should be co-prime and the sum of the weights should be 16. - Inject
48entries in the DECAP_TE_VRF where the entries have a mix of prefix lengths /22, /24, /26, and /28.
- Add 4 VRFs for encapsulations:
-
Send the following packets to DUT-1
* inner_src: `ipv4_inner_src` * inner_dst: `ipv4_inner_encap_match` * dscp: `dscp_encap_a` * outer_src: `ipv4_outer_src_222` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_a` * proto: `4` * inner_src: `ipv6_inner_src` * inner_dst: `ipv6_inner_encap_match` * dscp: `dscp_encap_a` * outer_src: `ipv4_outer_src_111` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_a` * proto: `41` * inner_src: `ipv4_inner_src` * inner_dst: `ipv4_inner_encap_match` * dscp: `dscp_encap_b` * outer_src: `ipv4_outer_src_222` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_b` * proto: `4` * inner_src: `ipv6_inner_src` * inner_dst: `ipv6_inner_encap_match` * dscp: `dscp_encap_b` * outer_src: `ipv4_outer_src_111` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_b` * proto: `41` * inner_src: `ipv4_inner_src` * inner_dst: `ipv4_inner_encap_match` * dscp: `dscp_encap_c` * outer_src: `ipv4_outer_src_222` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_c` * proto: `4` * inner_src: `ipv6_inner_src` * inner_dst: `ipv6_inner_encap_match` * dscp: `dscp_encap_c` * outer_src: `ipv4_outer_src_111` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_c` * proto: `41` * inner_src: `ipv4_inner_src` * inner_dst: `ipv4_inner_encap_match` * dscp: `dscp_encap_d` * outer_src: `ipv4_outer_src_222` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_d` * proto: `4` * inner_src: `ipv6_inner_src` * inner_dst: `ipv6_inner_encap_match` * dscp: `dscp_encap_d` * outer_src: `ipv4_outer_src_111` * outer_dst: `ipv4_outer_decap_match` * dscp: `dscp_encap_d` * proto: `41` -
Send traffic to DUT-1, covering all the installed v4 and v6 entries in the decap and encap VRFs. Validate that all traffic are all decapped per the DECAP VRFs and then encapsulated per the ENCAP VRFs and received as encapsulated packet by ATE.
-
Flush the
DECAP_TE_VRF, install 5000 entries with fixed prefix length of /32, and repeat the same traffic validation.
- network-instances/network-instance/name
- network-instances/network-instance/policy-forwarding/policies/policy/policy-id
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/sequence-id
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/protocol
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/dscp-set
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/source-address
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/protocol
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/dscp-set
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/source-address
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/decap-network-instance
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/post-network-instance
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/decap-fallback-network-instance
- network-instances/network-instance/name
- network-instances/network-instance/policy-forwarding/policies/policy/policy-id
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/sequence-id
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/protocol
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/dscp-set
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv4/source-address
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/protocol
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/dscp-set
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/source-address
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/decap-network-instance
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/post-network-instance
- network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/decap-fallback-network-instance
rpcs:
gnmi:
gNMI.Get:
gNMI.Set:
gNMI.Subscribe:
gribi:
gRIBI.Get:
gRIBI.Modify:
gRIBI.Flush:vRX
-
Home
- Test Plans
- ACCTZ-1.1: Record Subscribe Full
- ACCTZ-2.1: Record Subscribe Partial
- ACCTZ-3.1: Record Subscribe Non-gRPC
- ACCTZ-4.1: Record History Truncation
- ACCTZ-4.2: Record Payload Truncation
- Authz: General Authz (1-4) tests
- CNTR-1: Basic container lifecycle via
gnoi.Containerz. - CNTR-2: Container network connectivity tests
- Credentialz-1: Password console login
- Credentialz-2: SSH Password Login Disallowed
- Credentialz-3: Host Certificates
- Credentialz-4: SSH Public Key Authentication
- Credentialz-5: Hiba Authentication
- DP-1.2: QoS policy feature config
- DP-1.3: QoS ECN feature config
- DP-1.4: QoS Interface Output Queue Counters
- DP-1.7: One strict priority queue traffic test
- DP-1.8: Two strict priority queue traffic test
- DP-1.9: WRR traffic test
- DP-1.10: Mixed strict priority and WRR traffic test
- DP-1.11: Bursty traffic test
- DP-1.14: QoS basic test
- example-0.1: Topology Test
- FP-1.1: Power admin DOWN/UP Test
- gNMI-1.1: cli Origin
- gNMI-1.2: Benchmarking: Full Configuration Replace
- gNMI-1.3: Benchmarking: Drained Configuration Convergence Time
- gNMI-1.4: Telemetry: Inventory
- gNMI-1.5: Telemetry: Port Speed Test
- gNMI-1.8: Configuration Metadata-only Retrieve and Replace
- gNMI-1.9: Get requests
- gNMI-1.10: Telemetry: Basic Check
- gNMI-1.11: Telemetry: Interface Packet Counters
- gNMI-1.12: Mixed OpenConfig/CLI Origin
- gNMI-1.13: Optics Telemetry, Instant, threshold, and miscellaneous static info
- gNMI-1.14: OpenConfig metadata consistency during large config push
- gNMI-1.15: Set Requests
- gNMI-1.16: fabric redundancy test
- gNMI-1.17: Controller Card redundancy test
- gNMI-1.18: gNMI subscribe with sample mode for backplane capacity counters
- gNMI-1.19: ConfigPush after Control Card switchover
- gNMI-1.20: Telemetry: Optics Thresholds
- gNMI-1.21: Integrated Circuit Hardware Resource Utilization Test
- gNMI-1.22: Controller card port attributes
- gNMI-1.27: gNMI Sample Mode Test
- GNMI-2: gnmi_subscriptionlist_test
- gNOI-2.1: Packet-based Link Qualification
- gNOI-3.1: Complete Chassis Reboot
- gNOI-3.2: Per-Component Reboot
- gNOI-3.3: Supervisor Switchover
- gNOI-3.4: Chassis Reboot Status and Reboot Cancellation
- gNOI-4.1: Software Upgrade
- gNOI-5.1: Ping Test
- gNOI-5.2: Traceroute Test
- gNOI-5.3: Copying Debug Files
- gNOI-6.1: Factory Reset
- Health-1.1: Generic Health Check
- Health-1.2: Healthz component status paths
- MGT-1: Management HA solution test
- MTU-1.3: Large IP Packet Transmission
- OC-1.2: Default Address Families
- OC-26.1: Network Time Protocol (NTP)
- P4RT-1.1: Base P4RT Functionality
- P4RT-1.2: P4RT Daemon Failure
- P4RT-2.1: P4RT Election
- P4RT-2.2: P4RT Metadata Validation
- P4RT-3.1: Google Discovery Protocol: PacketIn
- P4RT-3.2: Google Discovery Protocol: PacketOut
- P4RT-3.21: Google Discovery Protocol: PacketOut with LAG
- P4RT-5.1: Traceroute: PacketIn
- P4RT-5.2: Traceroute Packetout
- P4RT-5.3: Traceroute: PacketIn With VRF Selection
- P4RT-6.1: Required Packet I/O rate: Performance
- P4RT-7.1: LLDP: PacketIn
- P4RT-7.2: LLDP: PacketOut
- Replay-1.0: Record/replay presession test
- Replay-1.1: Record/replay diff command trees test
- Replay-1.2: P4RT Replay Test
- RT-1.1: Base BGP Session Parameters
- RT-1.2: BGP Policy & Route Installation
- RT-1.3: BGP Route Propagation
- RT-1.4: BGP Graceful Restart
- RT-1.5: BGP Prefix Limit
- RT-1.7: Local BGP Test
- RT-1.10: BGP Keepalive and HoldTimer Configuration Test
- RT-1.11: BGP remove private AS
- RT-1.12: BGP always compare MED
- RT-1.14: BGP Long-Lived Graceful Restart
- RT-1.19: BGP 2-Byte and 4-Byte ASN support
- RT-1.21: BGP TCP MSS and PMTUD
- RT-1.23: BGP AFI SAFI OC DEFAULTS
- RT-1.24: BGP 2-Byte and 4-Byte ASN support with policy
- RT-1.25: Management network-instance default static route
- RT-1.26: Basic static route support
- RT-1.27: Static route to BGP redistribution
- RT-1.28: BGP to IS-IS redistribution
- RT-1.29: BGP chained import/export policy attachment
- RT-1.30: BGP nested import/export policy attachment
- RT-1.32: BGP policy actions - MED, LocPref, prepend, flow-control
- RT-1.33: BGP Policy with prefix-set matching
- RT-1.34: BGP route-distance configuration
- RT-1.51: BGP multipath ECMP
- RT-1.52: BGP multipath UCMP support with Link Bandwidth Community
- RT-1.53: prefix-list test
- RT-1.54: BGP Override AS-path split-horizon
- RT-1.55: BGP session mode (active/passive)
- RT-2.1: Base IS-IS Process and Adjacencies
- RT-2.2: IS-IS LSP Updates
- RT-2.6: IS-IS Hello-Padding enabled at interface level
- RT-2.7: IS-IS Passive is enabled at interface level
- RT-2.8: IS-IS metric style wide not enabled
- RT-2.9: IS-IS metric style wide enabled
- RT-2.10: IS-IS change LSP lifetime
- RT-2.11: IS-IS Passive is enabled at the area level
- RT-2.12: Static route to IS-IS redistribution
- RT-2.13: Weighted-ECMP for IS-IS
- RT-2.14: IS-IS Drain Test
- RT-2.15: IS-IS Graceful Restart Helper
- RT-3.1: Policy based VRF selection
- RT-3.2: Multiple <Protocol, DSCP> Rules for VRF Selection
- RT-4.10: AFTs Route Summary
- RT-4.11: AFTs Route Summary
- RT-5.1: Singleton Interface
- RT-5.2: Aggregate Interfaces
- RT-5.3: Aggregate Balancing
- RT-5.4: Aggregate Forwarding Viable
- RT-5.5: Interface hold-time
- RT-5.6: Interface Loopback mode
- RT-5.7: Aggregate Not Viable All
- RT-5.8: IPv6 Link Local
- RT-5.9: Disable IPv6 ND Router Arvetisment
- RT-5.10: IPv6 Link Local generated by SLAAC
- RT-6.1: Core LLDP TLV Population
- RT-7.1: BGP default policies
- RT-7.2: BGP Policy Community Set
- RT-7.3: BGP Policy AS Path Set
- RT-7.4: BGP Policy AS Path Set and Community Set
- RT-7.5: BGP Policy - Match and Set Link Bandwidth Community
- RT-7.8: BGP Policy Match Standard Community and Add Community Import/Export Policy
- RT-7.11: BGP Policy - Import/Export Policy Action Using Multiple Criteria
- RT-14.2: GRIBI Route Test
- SEC-3.1: Authentication
- SFLOW-1: sFlow Configuration and Sampling
- System-1: System testing
- TE-1.1: Static ARP
- TE-1.2: My Station MAC
- TE-2.1: gRIBI IPv4 Entry
- TE-2.2: gRIBI IPv4 Entry With Aggregate Ports
- TE-3.1: Base Hierarchical Route Installation
- TE-3.2: Traffic Balancing According to Weights
- TE-3.3: Hierarchical weight resolution
- TE-3.5: Ordering: ACK Received
- TE-3.6: ACK in the Presence of Other Routes
- TE-3.7: Base Hierarchical NHG Update
- TE-3.31: Hierarchical weight resolution with PBF
- TE-4.1: Base Leader Election
- TE-4.2: Persistence Mode
- TE-5.1: gRIBI Get RPC
- TE-6.1: Route Removal via Flush
- TE-6.2: Route Removal In Non Default VRF
- TE-8.1: DUT Daemon Failure
- TE-8.2: Supervisor Failure
- TE-9.2: MPLS based forwarding Static LSP
- TE-9.3: FIB FAILURE DUE TO HARDWARE RESOURCE EXHAUST
- TE-9: gRIBI MPLS Compliance
- TE-10: gRIBI MPLS Forwarding
- TE-11.1: Backup NHG: Single NH
- TE-11.2: Backup NHG: Multiple NH
- TE-11.3: Backup NHG: Actions
- TE-11.21: Backup NHG: Multiple NH with PBF
- TE-11.31: Backup NHG: Actions with PBF
- TE-13.1: gRIBI route ADD during Failover
- TE-13.2: gRIBI route DELETE during Failover
- TE-14.1: gRIBI Scaling
- TE-14.2: encap and decap scale
- TE-15.1: gRIBI Compliance
- TE-16.1: basic encapsulation tests
- TE-16.2: encapsulation FRR scenarios
- TE-16.3: encapsulation FRR scenarios
- TE-17.1: VRF selection policy driven TE
- TR-6.1: Remote Syslog feature config
- TRANSCEIVER-1: Telemetry: 400ZR Chromatic Dispersion(CD) telemetry values streaming
- TRANSCEIVER-3: Telemetry: 400ZR Optics firmware version streaming
- TRANSCEIVER-4: Telemetry: 400ZR RX input and TX output power telemetry values streaming.
- TRANSCEIVER-5: Configuration: 400ZR channel frequency, output TX launch power and operational mode setting.
- TRANSCEIVER-6: Telemetry: 400ZR Optics performance metrics (pm) streaming.
- TRANSCEIVER-7: Telemetry: 400ZR Optics inventory info streaming
- TRANSCEIVER-8: Telemetry: 400ZR Optics module temperature streaming.
- TRANSCEIVER-9: Telemetry: 400ZR TX laser bias current telemetry values streaming.
- TRANSCEIVER-10: Telemetry: 400ZR Optics FEC(Forward Error Correction) Uncorrectable Frames Streaming.
- TRANSCEIVER-11: Telemetry: 400ZR Optics logical channels provisioning and related telemetry.
- TRANSCEIVER-12: Telemetry: 400ZR Transceiver Supply Voltage streaming.
- TRANSCEIVER-13: Configuration: 400ZR Transceiver Low Power Mode Setting.
- TUN-1.4: Interface based IPv6 GRE Encapsulation
- TUN-1.9: GRE inner packet DSCP
- Test Plans