Yamaha AG06 audion interface

[Stewbow]

Hi Guys
I've played around unsuccessfully with my Yamaha AG06, tying to set it up so I have a Stereo Input and wanting to abide by The Golden Rule!!! But I can't find a way of Not Hearing Myself when I am am Not connected to Jamulus.
any ideas
thanks

[Jazzforever]

Hello,
having had a short look at the device, I propose: choose "Loopback" as "streaming out"-option and then mute both input channels (or one of them, if you are only using one). Now, direct monitoring should be disabled and, with the correct output-settings in Jamulus, you should only hear the signal from the computer.

[Stewbow]

Hi I cant see a mute buttons on the input channels!! But if I turn down the dials how is my music keyboard going to be heard by myself and anybody else? Stuart From: Jazzforever ***@***.***> Sent: Friday, February 2, 2024 3:27 PM To: jamulussoftware/jamulus ***@***.***> Cc: Stewbow ***@***.***>; Author ***@***.***> Subject: Re: [jamulussoftware/jamulus] Yamaha AG06 audion interface (Discussion #3224) Hello, having had a short look at the device, I propose: choose "Loopback" as "streaming out"-option and then mute both input channels (or one of them, if you are only using one). Now, direct monitoring should be disabled and, with the correct output-settings in Jamulus, you should only hear the signal from the computer. — Reply to this email directly, view it on GitHub <#3224 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCZE7WTMAFA6R2FIC3YEKH3YRUAT3AVCNFSM6AAAAABCWM4OPWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DGNBXHA2DI> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BCZE7WQXPDKJXJP2XAOM2ETYRUAT3A5CNFSM6AAAAABCWM4OPWWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAP5QMI.gif> Message ID: ***@***.*** ***@***.***> >

[Jazzforever]

Oh, you are using the keyboard input channel 3/4? You may connect your keyboard to the channels 1 and 2 (they have combined inputs for xlr- and mono jacks). Those channels have a red mute button. It is necessary to disable direct monitoring to avoid to hear yourself twice: through direct monitoring (to be avoided) and - with some delay - as the jamulus return via your computer, this is my understanding of the golden rule. Seems like with the Yamaha mixer this is possible only by using input channels 1 and 2.

[Stewbow]

Ahhhhh, I must have the version 1, it doesn't have the red mute button!!!
I'll stick it on Ebay

[Jazzforever]

You should wait a little bit, perhaps someone shows up with a better solution than mine, good luck!

…

Am 02.02.2024 um 19:38 schrieb Stewbow ***@***.***>: Ahhhhh, I must have the version 1, it doesn't have the red mute button!!! I'll stick it on Ebay — Reply to this email directly, view it on GitHub <#3224 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFZ65D6352Z7SM4MWNO73TTYRUXCFAVCNFSM6AAAAABCWM4OPWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DGNBZG43TA>. You are receiving this because you commented.

[Jazzforever]

Another idea: Instead of using mute-buttons, you could try to turn down the channel faders (the pots below the peak-led, not the gain-pots!). Maybe these faders do the same as mute-buttons.

…

Am 02.02.2024 um 19:38 schrieb Stewbow ***@***.***>: Ahhhhh, I must have the version 1, it doesn't have the red mute button!!! I'll stick it on Ebay — Reply to this email directly, view it on GitHub <#3224 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFZ65D6352Z7SM4MWNO73TTYRUXCFAVCNFSM6AAAAABCWM4OPWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DGNBZG43TA>. You are receiving this because you commented.

[QJKX]

A screengrab of AG06 vs AG06 MK2 in a youtube video.

AG06 Manual
AG06 Tech specs

Tech specs has a block diagram.

The "Monitor Mute" button disconnects Input 1 and Input 2 from Monitor and phones.
All other inputs are always connected.
(You can see Yamaha renamed the button in Mk2 to "Mix Minus Ch1-2".)

So the only way to follow the "golden rule" is to exclusively use Input 1/Input 2 and the "Monitor Mute button".

On the "To PC" switch you can choose "Dry" or "input mix" but not "Loopback".

[QJKX]

In case it's not obvious, you can plug a keyboard straight in to Input 1/2. Use the pad buttons.