Thanks, Inverter setup

[ershark]

Hi, I Will like to thank you for the excellent job on this project. For those who are new, I just want to point out the missteps I ran into before being able to make it work. First In the inverter, that battery has to be set to Lith and BMS Lithium Batt Mode(0-20) to 0. Also by Solark there has to be a terminal 120omh terminal resistor ( Between A+B-).

Jonathan
Inverter 12K Outdoor

[hectorasoto]

Hello

I try this and is no working I have the 12k model, i setup to 00 on Battery Mode and connect the cable to the canbus Battery port
can you tell me what RS485 adapter your using, im using the DSD-TECH-SH-U11F-Industrial-Application connected via USB to the HA Raspberry PI

[pbix]

Make sure the modbus slave number "SN" is set to 1 on this screen of your inverter:

Also make sure to do the unit test with modpoll before proceeding to installing the integration in Home Assistant.

[hectorasoto]

Thanks Is working fine