Makefile

# compile options (see README.md for descriptions)
# 0 = disable
# 1 = enable
#
ENABLE_CLANG                  := 0
ENABLE_SWD                    := 0
ENABLE_OVERLAY                := 0
ENABLE_LTO                    := 1
ENABLE_UART                   := 1
ENABLE_UART_DEBUG             := 0
ENABLE_AIRCOPY                := 1
ENABLE_AIRCOPY_FREQ           := 1
ENABLE_FMRADIO                := 1
ENABLE_NOAA                   := 0
ENABLE_VOICE                  := 0
ENABLE_MUTE_RADIO_FOR_VOICE   := 1
ENABLE_VOX                    := 1
ENABLE_ALARM                  := 1
ENABLE_TX1750                 := 1
ENABLE_PWRON_PASSWORD         := 0
ENABLE_RESET_AES_KEY          := 1
ENABLE_BIG_FREQ               := 0
ENABLE_SMALL_BOLD             := 1
ENABLE_KEEP_MEM_NAME          := 1
ENABLE_WIDE_RX                := 1
ENABLE_1250HZ_STEP            := 1
ENABLE_TX_WHEN_AM             := 0
ENABLE_F_CAL_MENU             := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS             := 0
ENABLE_SHOW_CHARGE_LEVEL      := 0
ENABLE_REVERSE_BAT_SYMBOL     := 1
ENABLE_CODE_SCAN_TIMEOUT      := 0
ENABLE_FREQ_CODE_SCAN_TIMEOUT := 1
ENABLE_AM_FIX                 := 1
ENABLE_AM_FIX_SHOW_DATA       := 1
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN    := 1
ENABLE_RSSI_BAR               := 1
ENABLE_SHOW_TX_TIMEOUT        := 0
ENABLE_AUDIO_BAR              := 1
ENABLE_COPY_CHAN_TO_VFO       := 1
#ENABLE_PANADAPTER             := 0
#ENABLE_SINGLE_VFO_CHAN        := 0

#############################################################

TARGET = firmware

GIT_HASH_TMP := $(shell git rev-parse --short HEAD)
ifeq ($(GIT_HASH_TMP),)
	GIT_HASH := "NOGIT"
else
	GIT_HASH := $(GIT_HASH_TMP)
endif
$(info GIT_HASH = $(GIT_HASH))

ifeq ($(ENABLE_UART), 0)
	ENABLE_UART_DEBUG := 0
endif

ifeq ($(ENABLE_CLANG),1)
	# GCC's linker, ld, doesn't understand LLVM's generated bytecode
	ENABLE_LTO := 0
endif

ifeq ($(ENABLE_LTO),1)
	# can't have LTO and OVERLAY enabled at same time
	ENABLE_OVERLAY := 0
endif

ifeq ($(ENABLE_SHOW_TX_TIMEOUT),1)
	# can't have ENABLE_SHOW_TX_TIMEOUT and ENABLE_AUDIO_BAR enabled at same time
	ENABLE_AUDIO_BAR := 0
endif

ifeq ($(ENABLE_VOICE),1)
	# no need for beeps
	ENABLE_BOOT_BEEPS := 0
endif

BSP_DEFINITIONS := $(wildcard hardware/*/*.def)
BSP_HEADERS     := $(patsubst hardware/%,bsp/%,$(BSP_DEFINITIONS))
BSP_HEADERS     := $(patsubst %.def,%.h,$(BSP_HEADERS))

OBJS =
# Startup files
OBJS += start.o
OBJS += init.o
ifeq ($(ENABLE_OVERLAY),1)
	OBJS += sram-overlay.o
endif
OBJS += external/printf/printf.o

# Drivers
OBJS += driver/adc.o
ifeq ($(ENABLE_UART),1)
	OBJS += driver/aes.o
endif
OBJS += driver/backlight.o
ifeq ($(ENABLE_FMRADIO),1)
	OBJS += driver/bk1080.o
endif
OBJS += driver/bk4819.o
ifeq ($(filter $(ENABLE_AIRCOPY) $(ENABLE_UART),1),1)
	OBJS += driver/crc.o
endif
OBJS += driver/eeprom.o
ifeq ($(ENABLE_OVERLAY),1)
	OBJS += driver/flash.o
endif
OBJS += driver/gpio.o
OBJS += driver/i2c.o
OBJS += driver/keyboard.o
OBJS += driver/spi.o
OBJS += driver/st7565.o
OBJS += driver/system.o
OBJS += driver/systick.o
ifeq ($(ENABLE_UART),1)
	OBJS += driver/uart.o
endif

# Main
OBJS += app/action.o
ifeq ($(ENABLE_AIRCOPY),1)
	OBJS += app/aircopy.o
endif
OBJS += app/app.o
OBJS += app/dtmf.o
ifeq ($(ENABLE_FMRADIO),1)
	OBJS += app/fm.o
endif
OBJS += app/generic.o
OBJS += app/main.o
OBJS += app/menu.o
OBJS += app/scanner.o
ifeq ($(ENABLE_PANADAPTER),1)
	OBJS += app/spectrum.o
endif
ifeq ($(ENABLE_UART),1)
	OBJS += app/uart.o
endif
ifeq ($(ENABLE_AM_FIX), 1)
	OBJS += am_fix.o
endif
OBJS += audio.o
OBJS += bitmaps.o
OBJS += board.o
OBJS += dcs.o
OBJS += font.o
OBJS += frequencies.o
OBJS += functions.o
OBJS += helper/battery.o
OBJS += helper/boot.o
OBJS += misc.o
OBJS += radio.o
OBJS += scheduler.o
OBJS += settings.o
ifeq ($(ENABLE_AIRCOPY),1)
	OBJS += ui/aircopy.o
endif
OBJS += ui/battery.o
ifeq ($(ENABLE_FMRADIO),1)
	OBJS += ui/fmradio.o
endif
OBJS += ui/helper.o
OBJS += ui/inputbox.o
ifeq ($(ENABLE_PWRON_PASSWORD),1)
	OBJS += ui/lock.o
endif
OBJS += ui/main.o
OBJS += ui/menu.o
OBJS += ui/scanner.o
OBJS += ui/status.o
OBJS += ui/ui.o
OBJS += ui/welcome.o
OBJS += version.o
OBJS += main.o

ifeq ($(OS), Windows_NT)
	TOP := $(dir $(realpath $(lastword $(MAKEFILE_LIST))))
else
	TOP := $(shell pwd)
endif

AS = arm-none-eabi-gcc

CC =
LD = arm-none-eabi-gcc

ifeq ($(ENABLE_CLANG),0)
	CC += arm-none-eabi-gcc
# Use GCC's linker to avoid undefined symbol errors
#	LD += arm-none-eabi-gcc
else
#	May need to adjust this to match your system
	CC += clang --sysroot=/usr/arm-none-eabi --target=arm-none-eabi
#	Bloats binaries to 512MB
#	LD = ld.lld
endif

OBJCOPY = arm-none-eabi-objcopy
SIZE = arm-none-eabi-size

ASFLAGS = -c -mcpu=cortex-m0
ifeq ($(ENABLE_OVERLAY),1)
	ASFLAGS += -DENABLE_OVERLAY
endif

CFLAGS =

ifeq ($(ENABLE_CLANG),0)
	#CFLAGS += -Os -Wall -Werror -mcpu=cortex-m0 -fno-builtin -fshort-enums -fno-delete-null-pointer-checks -std=c11 -MMD
	CFLAGS += -Os -Werror -mcpu=cortex-m0 -std=c11 -MMD
else
	# Oz needed to make it fit on flash
	CFLAGS += -Oz -Werror -mcpu=cortex-m0 -fno-builtin -fshort-enums -fno-delete-null-pointer-checks -std=c11 -MMD
endif

ifeq ($(ENABLE_LTO),1)
	CFLAGS += -flto=2
else
	# We get most of the space savings if LTO creates problems
	CFLAGS += -ffunction-sections -fdata-sections
endif

# May cause unhelpful build failures
#CFLAGS += -Wpadded

# catch any and all warnings
# better to bust than add new bugs
CFLAGS += -Wall -Wextra -Wpedantic

CFLAGS += -DPRINTF_INCLUDE_CONFIG_H
CFLAGS += -DGIT_HASH=\"$(GIT_HASH)\"
ifeq ($(ENABLE_SWD),1)
	CFLAGS += -DENABLE_SWD
endif
ifeq ($(ENABLE_OVERLAY),1)
	CFLAGS += -DENABLE_OVERLAY
endif
ifeq ($(ENABLE_AIRCOPY),1)
	CFLAGS += -DENABLE_AIRCOPY
endif
ifeq ($(ENABLE_AIRCOPY_FREQ),1)
	CFLAGS += -DENABLE_AIRCOPY_FREQ
endif
ifeq ($(ENABLE_FMRADIO),1)
	CFLAGS += -DENABLE_FMRADIO
endif
ifeq ($(ENABLE_UART),1)
	CFLAGS += -DENABLE_UART
endif
ifeq ($(ENABLE_UART_DEBUG),1)
	CFLAGS += -DENABLE_UART_DEBUG
endif
ifeq ($(ENABLE_BIG_FREQ),1)
	CFLAGS  += -DENABLE_BIG_FREQ
endif
ifeq ($(ENABLE_SMALL_BOLD),1)
	CFLAGS  += -DENABLE_SMALL_BOLD
endif
ifeq ($(ENABLE_NOAA),1)
	CFLAGS  += -DENABLE_NOAA
endif
ifeq ($(ENABLE_VOICE),1)
	CFLAGS  += -DENABLE_VOICE
endif
ifeq ($(ENABLE_MUTE_RADIO_FOR_VOICE),1)
	CFLAGS  += -DENABLE_MUTE_RADIO_FOR_VOICE
endif
ifeq ($(ENABLE_VOX),1)
	CFLAGS  += -DENABLE_VOX
endif
ifeq ($(ENABLE_ALARM),1)
	CFLAGS  += -DENABLE_ALARM
endif
ifeq ($(ENABLE_TX1750),1)
	CFLAGS  += -DENABLE_TX1750
endif
ifeq ($(ENABLE_PWRON_PASSWORD),1)
	CFLAGS  += -DENABLE_PWRON_PASSWORD
endif
ifeq ($(ENABLE_RESET_AES_KEY),1)
	CFLAGS  += -DENABLE_RESET_AES_KEY
endif
ifeq ($(ENABLE_KEEP_MEM_NAME),1)
	CFLAGS  += -DENABLE_KEEP_MEM_NAME
endif
ifeq ($(ENABLE_WIDE_RX),1)
	CFLAGS  += -DENABLE_WIDE_RX
endif
ifeq ($(ENABLE_1250HZ_STEP),1)
	CFLAGS  += -DENABLE_1250HZ_STEP
endif
ifeq ($(ENABLE_TX_WHEN_AM),1)
	CFLAGS  += -DENABLE_TX_WHEN_AM
endif
ifeq ($(ENABLE_F_CAL_MENU),1)
	CFLAGS  += -DENABLE_F_CAL_MENU
endif
ifeq ($(ENABLE_CTCSS_TAIL_PHASE_SHIFT),1)
	CFLAGS  += -DENABLE_CTCSS_TAIL_PHASE_SHIFT
endif
ifeq ($(ENABLE_BOOT_BEEPS),1)
	CFLAGS  += -DENABLE_BOOT_BEEPS
endif
ifeq ($(ENABLE_SHOW_CHARGE_LEVEL),1)
	CFLAGS  += -DENABLE_SHOW_CHARGE_LEVEL
endif
ifeq ($(ENABLE_REVERSE_BAT_SYMBOL),1)
	CFLAGS  += -DENABLE_REVERSE_BAT_SYMBOL
endif
ifeq ($(ENABLE_CODE_SCAN_TIMEOUT),1)
	CFLAGS  += -DENABLE_CODE_SCAN_TIMEOUT
endif
ifeq ($(ENABLE_FREQ_CODE_SCAN_TIMEOUT),1)
	CFLAGS  += -DENABLE_FREQ_CODE_SCAN_TIMEOUT
endif
ifeq ($(ENABLE_AM_FIX),1)
	CFLAGS  += -DENABLE_AM_FIX
endif
ifeq ($(ENABLE_AM_FIX_SHOW_DATA),1)
	CFLAGS  += -DENABLE_AM_FIX_SHOW_DATA
endif
ifeq ($(ENABLE_AM_FIX_TEST1),1)
	CFLAGS  += -DENABLE_AM_FIX_TEST1
endif
ifeq ($(ENABLE_SQUELCH_MORE_SENSITIVE),1)
	CFLAGS  += -DENABLE_SQUELCH_MORE_SENSITIVE
endif
ifeq ($(ENABLE_FASTER_CHANNEL_SCAN),1)
	CFLAGS  += -DENABLE_FASTER_CHANNEL_SCAN
endif
ifeq ($(ENABLE_backlight_ON_RX),1)
	CFLAGS  += -DENABLE_backlight_ON_RX
endif
ifeq ($(ENABLE_RSSI_BAR),1)
	CFLAGS  += -DENABLE_RSSI_BAR
endif
ifeq ($(ENABLE_AUDIO_BAR),1)
	CFLAGS  += -DENABLE_AUDIO_BAR
endif
ifeq ($(ENABLE_SHOW_TX_TIMEOUT),1)
	CFLAGS  += -DENABLE_SHOW_TX_TIMEOUT
endif
ifeq ($(ENABLE_COPY_CHAN_TO_VFO),1)
	CFLAGS  += -DENABLE_COPY_CHAN_TO_VFO
endif
ifeq ($(ENABLE_SINGLE_VFO_CHAN),1)
	CFLAGS  += -DENABLE_SINGLE_VFO_CHAN
endif
ifeq ($(ENABLE_PANADAPTER),1)
	CFLAGS += -DENABLE_PANADAPTER
endif

LDFLAGS =
ifeq ($(ENABLE_CLANG),0)
	LDFLAGS += -mcpu=cortex-m0 -nostartfiles -Wl,-T,firmware.ld
else
#	Fix warning about implied executable stack
	LDFLAGS += -z noexecstack -mcpu=cortex-m0 -nostartfiles -Wl,-T,firmware.ld
endif

# Use newlib-nano instead of newlib
LDFLAGS += --specs=nano.specs

ifeq ($(ENABLE_LTO),0)
	# Throw away unneeded func/data sections like LTO does
	LDFLAGS += -Wl,--gc-sections
endif

ifeq ($(DEBUG),1)
	ASFLAGS += -g
	CFLAGS  += -g
	LDFLAGS += -g
endif

INC =
INC += -I $(TOP)
INC += -I $(TOP)/external/CMSIS_5/CMSIS/Core/Include/
INC += -I $(TOP)/external/CMSIS_5/Device/ARM/ARMCM0/Include

LIBS =

DEPS = $(OBJS:.o=.d)

all: $(TARGET)
	$(OBJCOPY) -O binary $< $<.bin
	-python fw-pack.py $<.bin $(GIT_HASH) $<.packed.bin
	-python3 fw-pack.py $<.bin $(GIT_HASH) $<.packed.bin
	$(SIZE) $<

debug:
	/opt/openocd/bin/openocd -c "bindto 0.0.0.0" -f interface/jlink.cfg -f dp32g030.cfg

flash:
	/opt/openocd/bin/openocd -c "bindto 0.0.0.0" -f interface/jlink.cfg -f dp32g030.cfg -c "write_image firmware.bin 0; shutdown;"

version.o: .FORCE

$(TARGET): $(OBJS)
	$(LD) $(LDFLAGS) $^ -o $@ $(LIBS)

bsp/dp32g030/%.h: hardware/dp32g030/%.def

%.o: %.c | $(BSP_HEADERS)
	$(CC) $(CFLAGS) $(INC) -c $< -o $@

%.o: %.S
	$(AS) $(ASFLAGS) $< -o $@

.FORCE:

-include $(DEPS)

clean:
	rm -f $(TARGET).bin $(TARGET).packed.bin $(TARGET) $(OBJS) $(DEPS)