realme C3 Narzo 10A

Realme Narzo C3/10A

Since TWRP/PBRP is available but we cant install GSI using custom recovery due to dynamic partitions

Unlock bootloader
Make sure you use ADB Fastboot that support fastbootd (Like latest Google SDK Platform Tools in here)
Download any Phh based GSI (A/B arm64 image)
Download vbmeta and boot from here : https://t.me/RealmeC310a then type #boot and #vbmeta
Make sure the boot.img that you downloaded is same with your current firmware version

Extract and copy all GSI Image, vbmeta, and boot to ADB Fastboot folder
Boot to system and make sure USB Debugging is active on your device
Open ADB Fastboot and type: adb reboot fastboot
Wait till the device boot to recovery (Yes, recovery, not fastboot. Because realme UI using Dynamic Partition and realme UI supporting fastbootd on it's recovery.) If you doubt, you can check on Device Manager and check your device already detected as Bootloader Interface or not. If already detected as Bootloader Interface, you can go on.
Then type : fastboot flash system gsiimagename.img
If done, type : fastboot reboot bootloader
After reboot to bootloader, type : fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img && fastboot flash boot boot.img
Final touch, type : fastboot -w or Stock recovery to format the data
Then fastboot reboot to start booting to the system

Component	Comment
Back Camera	Working
Front facing Camera	Working
Speaker / Mic	Working
Bluetooth	Working
WiFi	Working
SIM / Mobile Data / Voice	Working
VoLTE	Working
Fingerprint Sensor	Not Working
Offline Charging	Working
Tethering	Working
Hotspot	Working
Auto-Brightness	Working (But have lower brightness issue)

Tested By: me and my tested - RMX2020 Firmware version RMX2020_11.A.59 - Date tested April 15, 2021.

Template created by @zguithues and @hackintosh5

End