Skip to content

pkr895/mathematics_in_lean_source

 
 

Repository files navigation

Mathematics in Lean Source

This repository is used to generate the textbook and user repository for Mathematics in Lean.

Our build process applies rudimentary scripts to marked up Lean files to generate

  • source files for the textbook,
  • Lean exercise files, and
  • Lean solution files,

and put them all in the right places.

We use Sphinx and the Read the Docs theme to generate the HTML and PDF versions of the textbook.

Finally, we use another script to deploy the contents to the user repository.

Setup

To edit the Lean files, you need to have Lean, github, and friends installed. See the instructions on the Lean community web pages . In particular, don't forget to use

lake exe cache get

after fetching this repository to get the compiled version of Mathlib.

To build the textbook, you need to have Sphinx and ReadTheDocs installed, as well as the Python regex package. Ideally, pip install -r scripts/requirements.txt should suffice.

Overview

The Lean source files are in the MIL directory. There is a folder for each chapter, the name of which begins with the letter C and the chapter number. The scripts sort the chapters and ignore folders that do not begin with C.

Each folder should contain an .rst file with the same name, which has the chapter header for Sphinx. Each folder also has a Lean source file for each section, the name of which begins with S and the section number. The scripts ignore Lean files that do not begin with S. The markup that is used to generate the content is described below.

The folder sphinx_source contains files that are automatically added to a generated folder called source, which is used by Sphinx. It includes, in particular, a folder for any figures you want to use in the textbook.

The folder user_repo_source contains files that are automatically added to a generated folder called user_repo, which is used to build the user repository. It includes, in particular, the README file for that repository.

Build

Running scripts/mkall.py does the following:

  • It creates and initializes a source directory, for use by Sphinx.
  • It creates and initializes a user_repo directory with files that will be deployed to the user repository.
  • It updates the file MIL.lean to match the contents of the MIL folder.

With the source directory in place, you can use make html and make latexpdf to call Sphinx to build the HTML and PDF versions of the book, respectively. Sphinx puts these in a generated build directory.

Running scripts/deploy.sh leanprover-community mathematics_in_lean calls all three of the previous scripts, copies the HTML and PDF versions of the book to user_repo, and deploys the user repository to the github repository leanprover-community/mathematics_in_lean. You can deploy to another destination for testing.

Running scripts/clean.py deletes the source, user_repo, and build directories.

Markup

The Lean files in the MIL folder generate three types of files:

  • Source files for the Sphinx textbook.
  • Files with examples (and exercises) for the user repository.
  • Files with solutions for the user repository. A line of text from the Lean file may go to any combination of these destinations simultaneously, or nowhere at all, as determined by simple markup directives in the file.

When scripts/mkall.py starts processing a file, it sends output to both the associated examples file and the associated solutions file by default. This makes sense, for example, for the import lines.

The following markup specifies material for the textbook:

/- TEXT:
Stuff for the textbook goes here.
TEXT. -/

The lines between the comments are sent only to the associated Sphinx source file.

After the line TEXT. -/, by default, lines of text are sent only to the examples file. You can replace the last line with EXAMPLES: -/, which has the same effect, SOLUTIONS: -/ to send the lines to the solutions file, BOTH: -/ to send the lines to the both files, or OMIT: -/ to send the lines to neither.

You can subsequently modify the behavior with the additional comment lines -- EXAMPLES:, -- SOLUTIONS:, -- BOTH:, and -- OMIT:. The behavior stays in effect until another directive changes it.

While the script is processing lines of Lean code, you can specify that a sequence of lines should be added to the textbook as a block quote by enclosing it as follows:

-- QUOTE:
example : 1 + 1 = 2 := by rfl
-- QUOTE.

Note the use of the period to mark the end of the quote.

In such a quote block, any lines that are designated to go only to the solutions file are not included in the quote. Thus you can only quote lines that are sent to the examples file, sent to both the examples and solutions files, or omitted from both. The behavior of the QUOTE directives is otherwise independent of the behavior of the EXAMPLES, SOLUTIONS, BOTH, and OMIT directives. For example, you can switch output from the examples file to both the examples and solutions file in the middle of a quote. It doesn't make a difference whether one of the latter directives occurs just before or just after a QUOTE directive.

You can also use /- EXAMPLES:, /- SOLUTIONS:, /- BOTH:, and /- OMIT: to put text in a block comment that is sent to one of the files accordingly. This provides a handy way to specify a sorry in an examples file that is replaced by a solution in the solution file. Here's an example of how these are used:

/- TEXT:
Here is an example of the way that ``rintro`` is used:
TEXT. -/
-- QUOTE:
example : s ∩ (t ∪ u) ⊆ s ∩ t ∪ s ∩ u := by
  rintro x ⟨xs, xt | xu⟩
  · left; exact ⟨xs, xt⟩
  · right; exact ⟨xs, xu⟩
-- QUOTE.

/- TEXT:
As an exercise, try proving the other inclusion:
BOTH: -/
-- QUOTE:
theorem foo : s ∩ t ∪ s ∩ u ⊆ s ∩ (t ∪ u) := by
/- EXAMPLES:
  sorry
SOLUTIONS: -/
  rintro x (⟨xs, xt⟩ | ⟨xs, xu⟩)
  · use xs; left; exact xt
  · use xs; right; exact xu
-- QUOTE.

The second text block represents a common idiom for presenting exercises: after the textbook prose, a theorem or example line is sent to both the examples and the solutions file. The examples file contains only a sorry, whereas the solutions file contains the full solution. The solution is checked by Lean in the source file, but it is not included in the quote.

Note also the useful convention that if a blank line is needed in the examples or solutions file, it is specified after the relevant segment, so that the next time output is enabled no blank line is needed. So, in the example above, there is no blank line before or after -- QUOTE: because we assume that prior input has already inserted a blank line, but there is a blank line after -- QUOTE.

It is common to use sections to declare and scope variables in the examples and solutions files, but to omit the section commands from quote. Thus you might use the following pattern:

/- TEXT:
Here is an example of the way that ``rintro`` is used:
BOTH: -/
section
variable (s t u : Set α)

-- EXAMPLES:
-- QUOTE:
example : s ∩ (t ∪ u) ⊆ s ∩ t ∪ s ∩ u := by
  rintro x ⟨xs, xt | xu⟩
  · left; exact ⟨xs, xt⟩
  · right; exact ⟨xs, xu⟩
-- QUOTE.

Just make sure that, later in the file, the matching end and a blank line after are sent to both outputs.

The weird pair of characters αα in a Lean input file is simply deleted from any output produced by the script. This is a little hack that allows you to produce the same identifier in the examples and solutions files. For example, the exercise above could have been written as follows:

/- TEXT:
As an exercise, try proving the other inclusion:
EXAMPLES: -/
-- QUOTE:
theorem foo : s ∩ t ∪ s ∩ u ⊆ s ∩ (t ∪ u) := by
  sorry
-- QUOTE.

-- SOLUTIONS:
theorem fooαα : s ∩ t ∪ s ∩ u ⊆ s ∩ (t ∪ u) := by
  rintro x (⟨xs, xt⟩ | ⟨xs, xu⟩)
  · use xs; left; exact xt
  · use xs; right; exact xu

The theorem is named foo in both the examples and the solutions, but Lean doesn't complain about a duplicate identifier in the source file.

Finally, there is a mechanism that allows you to quote any part of the file in the textbook, before or after it appears in the Lean source file. This can be used, for example, to present a long proof and then refer back to parts of it. Encode the lines you want to quote with a pair of tags:

theorem foo : s ∩ t ∪ s ∩ u ⊆ s ∩ (t ∪ u) := by
-- TAG: my_tag
  rintro x (⟨xs, xt⟩ | ⟨xs, xu⟩)
  · use xs; left; exact xt
  · use xs; right; exact xu
-- TAG: end

The first tag can have any label you want in place of my_tag, whereas the second should be exactly as shown. Adding the line

-- LITERALINCLUDE: my_tag

in the middle of a text block anywhere in the file will insert the tagged text as a block quote in the textbook, using a Sphinx directive that is designed for exactly that purpose.

Testing

After running scripts/mkall.py, you can use lake build to compile all the lean source files. This will print all the output generated by #check, #eval, and other commands found in the source files, as well as a warning for each sorry, and so on. Scanning the output provides a way to detect whether all the definitions, theorems, and proofs are well formed. This does not, however, confirm that the examples files and solutions files that are generated from the lean source files are well formed.

To test the examples, use scripts/examples_test.py. This compiles all the lean source files as with scripts/mkall.py, but then it copies the Lean files from user_repo into a folder MIL/Test and constructs MIL.lean to import each of those. Use lake build to compile them.

Similarly, use scripts/solutions_test.py followed by lake build to test all the solutions files.

Use scripts/clean_test.py to remove the directory MIL/Test and restore MIL.lean to import the Lean source files.

Processing one section

Instead of building everything, you can test build a single section with scripts/mksection.py. For example,

  scripts/mksection.py C03_Logic S02_The_Existential_Quantifier

creates the examples file, the solutions file, and the Sphinx restructured text file for the section indicated.

How to contribute

The textbook is still a work in progress, but feedback and corrections are welcome. You can open a pull request, find us on the Lean Zulip channel, or contact us by email.

About

Source code for the Mathematics in Lean tutorial.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Lean 94.7%
  • Python 3.0%
  • TeX 1.4%
  • Dockerfile 0.5%
  • Batchfile 0.1%
  • Shell 0.1%
  • Other 0.2%