Install aliexpress module -->> YD-RP2040 (vcc-gnd.com)

[retroban]

Hello. I want to use this firmware with a module from aliexpress called YD-RP2040 (vcc-gnd.com), it has an additional button and an RGB diode. The diode is the same as the waveshare RP2040-Zero only on a different port. How to adapt the firmware? I previously tried the firmware pico_fido_pico-5.8.uf2 everything seems to be working, except that you can’t select Upload in the YubiKey Manager in the Applications - Yubico OTP section, I get an error. And I don’t quite understand how to select the mode for generating a random password at the touch of a button. Please help me with any questions.

[agczsz]

you 'd better generte your own otp,and upload it on https://upload.yubico.com/，then sign up for your api https://upgrade.yubico.com/getapikey/

[retroban]

How can I change the pin numbers to work correctly on such a board?

[retroban]

Here is a model with only 16 MB -- https://grobotronics.com/yd-rp2040-core-board-4mb-flash-usb-type-c.html?sl=en

[retroban]

There is an error through the manager, but if you transfer all the numbers using your link and register manually, this also does not work, until you come up with a shorter serial number, then the check passes.

[retroban]