tty: serial: imx: disable Ageing Timer interrupt request irq

[ Upstream commit ef25e16ea9674b713a68c3bda821556ce9901254 ]

There maybe pending USR interrupt before requesting irq, however
uart_add_one_port has not executed, so there will be kernel panic:
[    0.795668] Unable to handle kernel NULL pointer dereference at virtual addre
ss 0000000000000080
[    0.802701] Mem abort info:
[    0.805367]   ESR = 0x0000000096000004
[    0.808950]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.814033]   SET = 0, FnV = 0
[    0.816950]   EA = 0, S1PTW = 0
[    0.819950]   FSC = 0x04: level 0 translation fault
[    0.824617] Data abort info:
[    0.827367]   ISV = 0, ISS = 0x00000004
[    0.831033]   CM = 0, WnR = 0
[    0.833866] [0000000000000080] user address but active_mm is swapper
[    0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[    0.845953] Modules linked in:
[    0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1
[    0.855617] Hardware name: Freescale i.MX8MP EVK (DT)
[    0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0
[    0.872283] lr : imx_uart_int+0xf8/0x1ec

The issue only happends in the inmate linux when Jailhouse hypervisor
enabled. The test procedure is:
while true; do
	jailhouse enable imx8mp.cell
	jailhouse cell linux xxxx
	sleep 10
	jailhouse cell destroy 1
	jailhouse disable
	sleep 5
done

And during the upper test, press keys to the 2nd linux console.
When `jailhouse cell destroy 1`, the 2nd linux has no chance to put
the uart to a quiese state, so USR1/2 may has pending interrupts. Then
when `jailhosue cell linux xx` to start 2nd linux again, the issue
trigger.

In order to disable irqs before requesting them, both UCR1 and UCR2 irqs
should be disabled, so here fix that, disable the Ageing Timer interrupt
in UCR2 as UCR1 does.

Fixes: 8a61f0c ("serial: imx: Disable irqs before requesting them")
Suggested-by: Sherry Sun <[email protected]>
Reviewed-by: Sherry Sun <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Acked-by: Jason Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

drivers/tty/serial/imx.c

@@ -2348,6 +2348,11 @@ static int imx_uart_probe(struct platform_device *pdev)
 	ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
 	imx_uart_writel(sport, ucr1, UCR1);
 
+	/* Disable Ageing Timer interrupt */
+	ucr2 = imx_uart_readl(sport, UCR2);
+	ucr2 &= ~UCR2_ATEN;
+	imx_uart_writel(sport, ucr2, UCR2);
+
 	/*
 	 * In case RS485 is enabled without GPIO RTS control, the UART IP
 	 * is used to control CTS signal. Keep both the UART and Receiver