VHDL-VGA-MODULE

A VGA driver written in VHDL for displaying a 640x480 image on a VGA supported monitor, with an example drawing included.

Project Description

Design_TB_Sources contains the design and simulation sources for this project. VGA-MODULE-proj contains a Vivado Project design for a Zedboard FPGA. While developing this project I used VHDL Display Simulator made by fcayci

The module is split into 3 design sources with one TOP file: a 100MHz to 25Mhz clock divider done in clock_div.vhd generating the necessary timings like Hsync and Vsync, done in VGA_timing.vhd and generating the necessary output pattern to the display pattern_generator.vhd. Currently the module only supports the basic 640x480 resolution at 60Hz, which needs the 25MHz clock signal to drive it.

The hierchry for the design sources in Vivado:

+- Design Sources/          
| -- Video_Top.vhd           : Top File
  | -- clock_div.vhd         : Clock divider, from 100MHz to 25MHz
  | -- VGA_timing.vhd        : Timing genration
  | -- pattern_genrator.vhd  : Output image generation
+- Simulation Sources
| -- VGA_Module_tb.vhd       : Main simulation/testbench file, tests above 3 entitys
+- Constraints
| -- Zedbaord_master.xdc

--

Simulation

VGA_Module_tb has a slightly modified process used for writting RGB values into a text document, this is used by the Display-Simulator

Below is a screenshot of a simulation depicting signals

Below is a screnshot of the current example object drawn and simulated by the Display-Simulator.html

---

VGA Architecture Description

• Image Generator: Produces pixel signals - R, G, B. They get converted to analog voltages between 0V and 0.7V by DACs (usually with a resolution between 6 and 10 bits), before being sent to the monitor.

• Control signal generator: Produces the VGA clock clk_vga, plus control signals Hactive (horizontal active window), Vactive (vertical active window), dena (display enable), Hsync (horizontal sync) and Vsync (Vertical sync). This block is application-independent (it depends only on the VGA mode), so its design is always the same.

• DDC (Display Data Channel) - Allows the computer to read the display's features (supported resolutions, timings etc.), stored in a ROM with extended display identification data (EDID) format. The original VGA mode (640 x 480 x 60Hz) is supported by any monitor by default. Employs I2C protocol. Is also application-independent.

VGA Signal Description

• Hsync and Vsync - are responsible for determining when new line or a new frame should start, respectively, with their timings defining the VGA mode.
• Hactive and Vactive - represent the time intervals during wich an image is actually being drawn on the screen.
• dena (display enable) is responsible for tuning the pixel signals off during retrace, so it can simply be obtained by ANDing Hactive and Vactive.

Note: Only 2 of the 5 signals are transmitted to the monitor.

VGA Connector Pins

There are 5 main signals sent to the monitor:

• pins 1 - 3 transmit the color signals - R, G, B. They are analog voltages between 0V and 0.7V on two parallel 75Ω resistors (all other signals are digital).
• pins 13 and 14 transmit horizontal and vertical sync signals.