- 1x Wemos D1 R32 Board
- 20cm Side Glow Fiber Optic Cable 2mm
- 1x 3D printed part "ledCover.stl"
Pin mapping of the Wemos D1 R32 Board
Solder cables as shown to connect power
Wemos D1 R32 Board fixed inside controllBox
Locations of the two leds
Fix the Fiber Optic cables with masking tape
Fix the optic cables on the board with hot glue
Red led active
Red and blue led active
You can also print "ledCover.stl" and use it to fix the fiber optic cables to the board
Detail of "ledCover.stl" fixed with hot glue to the board
