MANUAL.txt

The Offline Windows Password Editor
(c) 1997-2014 Petter Nordahl-Hagen

Command line utilities

All these programs need one (or more) registry files to work on.
These are the binary registry files, called "hives" that usually are
located on a Windows machine under \WINDOWS\System32\config
where the most important ones are:
SAM - HKEY_LOCAL_MACHINE\SAM, Security Accounts Manager
      contains local user / group info, user passwords are here
SYSTEM - HKEY_LOCAL_MACHINE\SYSTEM: System settings / configuration
         (services, drivers, hardware info, some boot config)
SOFTWARE - HKEY_LOCAL_MACHINE\SOFTARE: Config and info of installed
           software and a lot of higher level windows config

Note that these programs (and the registry library they use) does not
join all these files in the same tree like windows does.
For example, a path like
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control
is not valid, it is instead just
ControSet001\Control
(after selecting the hive if more than one is loaded)
But except if you use the registry edit or export/import functions you
do not need think about this as for other things the tools handle
this.


chntpw: Program for interactively resetting passwords and group
memberships.
My boot CD runs this with options -i -L SAM

  chntpw: change password of a user in a Windows SAM file,
  or invoke registry editor. Should handle both 32 and 64 bit windows and
  all version from NT3.x to Win8
  chntpw [OPTIONS] <samfile> [systemfile] [securityfile] [otherreghive] [...]
   -h          This message
   -u <user>   Username or RID (0x3e9 for example) to interactively edit
   -l          list all users in SAM file and exit
   -i          Interactive Menu system
   -f          Interactively edit first admin user
   -e          Registry editor. Now with full write support!
   -d          Enter buffer debugger instead (hex editor), 
   -v          Be a little more verbose (for debuging)
   -L          For scripts, write names of changed files to /tmp/changed
   -N          No allocation mode. Only same length overwrites possible (very safe mode)
   -E          No expand mode, do not expand hive file (safe mode)



 -u <user>   Username or RID (0x3e9 for example) to interactively edit

Invoke the interactive edit menu on specified user.
Specifying a user name will most likely fail if user has international
character, so better to use user ID (RID), for example
 chnptw -u 0x3e9 SAM
to edit user with hexadecimal RID 3e9


 -l          list all users in SAM file and exit

Just that, list users in human readable form, with some info about if
user is admin and if password is set.

 -i          Interactive Menu system

Invokes the menu system. Menu items will vary a bit depending on what
registry hives are loaded.

 -f          Interactively edit first admin user

Select first admin user for edit. This is user with lowest RID that
also is member of administators group, or built-in user 0x1f4 if not
others possible.

 -e          Registry editor. Now with full write support!

Enter the registry editor. It is a small command system. ? for help
there. See other documentation for more on regedits.

 -d          Enter buffer debugger instead (hex editor), 

Command line type hex editor, mostly for debugging purposes. ? for help.

 -v          Be a little more verbose (for debuging)

Lots of debug output during most operations (especially hive loading)

 -L          For scripts, write names of changed files to /tmp/changed

If any of the other functions changes the registry, the changed files
are listed here. Can be used by wrapper scripts to know what to save.
My boot CD uses it.

 -N          No allocation mode. Only same length overwrites possible (very safe mode)

Safe mode. Will only allow changes in registry that overwrites old
values with same length data. Password reset only changes 2 bytes, and
does not change value lenght, so password reset will still work in
this safe mode. If something tries to violate this safe mode, a lot of
error messages (some of the rather obscure) may occur.

 -E          No expand mode, do not expand hive file (safe mode)

Safe mode. Does not allow expanding the size of the file, but will
allow adding keys/values as long as there is free space in the file
already. (most files contains some free space)
If expansion is needed but not allowed by this option,
a lot of obscure error messages may occur, and file should not be saved.

-------------------------------------------------------------------------

reged: Registry editor and export and import of .reg files.

  reged version 0.1 110511, (c) Petter N Hagen

  Modes:
  -x <registryhivefile> <prefixstring> <key> <output.reg>
     Xport. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
     <key> is key to dump (recursively), \ or \\ means all keys in hive
     Only one .reg and one hive file supported at the same time
  -I <registryhivefile> <prefixstring> <input.reg>
     Import from .reg file. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
     Only one .reg and one hive file supported at the same time
  -e <registryhive> ...
     Interactive edit one or more of registry files

  Options:
  -L : Log changed filenames to /tmp/changed, also auto-saves
  -C : Auto-save (commit) changed hives without asking
  -N : No allocate mode, only allow edit of existing values with same size
  -E : No expand mode, do not expand hive file (safe mode)
  -t : Debug trace of allocated blocks
  -v : Some more verbose messages


Modes:
-x <registryhivefile> <prefixstring> <key> <output.reg>
   Xport. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
   <key> is key to dump (recursively), \ or \\ means all keys in hive
   Only one .reg and one hive file supported at the same time

Exports everything below the specified <key> of the hive to .reg file.
Since the program does not care about what part of the registry
Windows thinks it is, you must specify the prefix if the .reg file
needs to be used in Windows.
Prefix is like
HKEY_LOCAL_MACHINE\SOFTWARE for software hive file
HKEY_LOCAL_MACHINE\SYSTEM for system hive file
and so on, look in regedit.exe in windows for details.

To dump the whole hive, use \ or \\ or . as the key.
Examples:

  reged -x system HKEY_LOCAL_MACHINE\\SYSTEM ControlSet001 output.reg

should export everything below ControlSet001 key from registry hive
file named system into .reg file named output.reg, using
HKEY_LOCAL_MACHINE\SYSTEM in front of every key name in the .reg file.
(in most shells \\ is needed to ignore the meaning \ has to the shell)

  reged -x system HKEY_LOCAL_MACHINE\\SYSTEM ControlSet001\\Enum output.reg

same, but start from ControlSet001\Enum

  reged -x system HKEY_LOCAL_MACHINE\\SYSTEM \\ output.reg

export everything in the system file



  -I <registryhivefile> <prefixstring> <input.reg>
     Import from .reg file. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
     Only one .reg and one hive file supported at the same time

Reverse of -x, this reads from a .reg file and puts it into the hive
file, just like regedit.exe foobar.reg will do in windows.
The <prefixstring> is removed from the start of each key name, if you
specify this wrong, the result may not be what you expected.
KNOWN PROBLEM: This routine is slow, very slow indeed on binary values (has
hex numbers in .reg file). May take over 5 minutes to import a file
the size of a normal XP software-hive .reg export.
Problems / unusual things in the .reg file may cause crash or
unexpected data or some times even an error messsage! :)

KNOWN PROBLEMS: May bork on some wide character (UTF16) .reg files.
(crash or does not do exactly what you would expect)

  -e <registryhive> ...
     Interactive edit one or more of registry files

Enter the registry editor. It is a small command system. ? for help
there. See other documentation for more on regedits.
If both -I and -e given, editor will be entered after import, but
before save, so you can check things if you need.


 Options:
 -L : Log changed filenames to /tmp/changed, also auto-saves
 -C : Auto-save (commit) changed hives without asking

Usually this command prompts for save, since import may have messed up.

-N : No allocate mode, only allow edit of existing values with same size
-E : No expand mode, do not expand hive file (safe mode)

same as on chntpw

-t : Debug trace of allocated blocks

lot of hive load debug info. very much. allocator debug.

-v : Some more verbose messages

a bit debug messages

** In interactive registry editor:
<keyname> name of a key (not a path), ex: MyKey
<valuename> name of a value (not a path), ex: MyCoolValueName
<keypath> may be a path, ex: foobar\baz\gazonk
as usual with paths, \ starts from the root key, without it is relative to
current key
<valuepath> value, may have path. ex: \foo\bar\MyValue
is value named MyValue in key bar in key foo
cd .. goes back a directory


List subkeys and values in current key
  dir
  ls

Change current key:
  cd <keypath>
  cd ..        # goes back a key

Show a value, tries to show according to type, else hexdump
  type <valuepath>
  cat <valuepath>

Hexdump value data (no matter what type it is)
  hex <valuepath>

Edit a value:
  ed <valupath>
and it will show old value and ask for new

Make a new key (cannot be a path)
  nk <keyname>

Delete a key, key must be empty, cannot be a path
  dk <keyname>

Delete a value, cannot be a path
  dv <valuename>

Delete all values in current key (no questions asked!)
  delallv

Delete recursively key and all keys under it (no questions asked)
May take some time if large tree
  rdel <keyname>

Make a new value of selected type. It will be empty, use 'ed' afterwards.
  nv <type> <valuename>
Where type is a hex number, from this list:
  0 : REG_NONE
  1 : REG_SZ
  2 : REG_EXPAND_SZ
  3 : REG_BINARY
  4 : REG_DWORD
  5 : REG_DWORD_BIG_ENDIAN
  6 : REG_LINK
  7 : REG_MULTI_SZ
  8 : REG_RESOUCE_LIST
  9 : REG_FULL_RES_DESC
  a : REG_RES_REQ
  b : REG_QWORD
it will not prevent you from using other numbers

Show key class data, in hexdump (class data has no special type)
  ck <keypath>

Export to .reg file, same as -x option above
  ek <filename.reg> <prefix> <keyname>





------------------------------

samusrgrp
is a command line tool to add users to groups or remove users from
groups. Users and groups must be local (cannot be domain / AD).
It can also list the groups with their members in several forms, the
output can be used in scripts of course.

Listing groups will also list domain users that are members of the
group (if any), but it will not be able to look up the name, so it
will be listed as a SID only.

  samusrgrp version 0.2 130501, (c) Petter N Hagen
  ./samusrgrp  [-a|-r] -u <user> -g <groupid> <samhive>
  Add or remove a (local) user to/from a group
  Mode:
     -a = add user to group
     -r = remove user from group
     -l = list groups
     -L = list groups and also their members
     -s = Print machine SID

For add or remove, you must also specify a bit more info:

  Parameters:
     <user> can be given as a username or a RID in hex with 0x in front
     <group> is the group number, in hex with 0x in front
     Example:
     -a -u theboss -g 0x220 -> add user named 'theboss' group hex 220 (administrators)
     -a -u 0x3ea -g 0x221 -> add user with RID (hex) 3ea group hex 221 (users)
     -r -u 0x3ff -g 0x220 -> remove user RID 0x3ff from grp 0x220
     Note that usernames with international characters usually fails to be found
     so please use RID number instead
     If success, there will be no output, and exit code is 0
     Also, success if user already in (or not in if -r) the group

  Options:
     -H : Human readable output, else parsable
     -N : No allocate mode, only allow edit of existing values with same size
     -E : No expand mode, do not expand hive file (safe mode)
     -t : Debug trace of allocated blocks
     -v : Some more verbose messages/debug

  Multi call binary, if program is named:
    samusrtogrp -- Assume -a mode: Add a user into a group
    samusrfromgrp -- Assume -r mode: Remove user from a group

Example of group listing:


 samusrgrp -L SAM

will list groups with member users, for example:

222:Guests:0:1f4:Administrator:S-1-5-21-596911364-3511430013-269812654-500
222:Guests:1:1f5:Guest:S-1-5-21-596911364-3511430013-269812654-501
223:Power Users:0:1f4:Administrator:S-1-5-21-596911364-3511430013-269812654-500
223:Power Users:1:1f5:Guest:S-1-5-21-596911364-3511430013-269812654-501
223:Power Users:2:3e9:foo:S-1-5-21-596911364-3511430013-269812654-1001

Fields are:
Group ID (hex)
Group name
Member number (starts at 0)
Members RID (hex)
Members name (if available, else SID)
Members SID

So in this example, the Guests group have 2 members: Administrator and
Guest.
At the time of writing this, it WILL NOT LIST EMPTY GROUPS (no
members). I plan to change this, empty groups on one line with -1 in
member number field, and rest of user fields empty.

 samusrgrp -l SAM

will list groups (no members)

220:Administrators:2
221:Users:2
222:Guests:1
223:Power Users:0

Fields are:

Group ID (hex)
Group name
Number of members

this listing will show all groups, also empty groups.


-------------------------------------------------

sampasswd
Password reset from command line (scriptable)
Or list users in SAM file in a few different formats.



  ./sampasswd  [-r|-l] [-H] -u <user> <samhive>
  Reset password or list users in SAM database
  Mode:
     -r = reset users password
     -l = list users in sam

One mode must be selected

  Parameters:
     <user> can be given as a username or a RID in hex with 0x in front
     Example:
     -r -u theboss -> resets password of user named 'theboss' if found
     -r -u 0x3ea -> resets password for user with RID 0x3ea (hex)
     -r -a -> Reset password of all users in administrators group (0x220)
     -r -f -> Reset password of admin user with lowest RID
              not counting built-in admin (0x1f4) unless it is the only admin
     Note that usernames with international characters usually fails to be found
     so please use RID number instead
     If success, there will be no output, and exit code is 0

  Options:
     -H : For list: Human readable listing (default is parsable table)
     -H : For reset: Will output confirmation message if success
     -N : No allocate mode, only allow edit of existing values with same size
     -E : No expand mode, do not expand hive file (safe mode)
     -t : Debug trace of allocated blocks
     -v : Some more verbose messages/debug

List examples:

 sampasswd -l xpreg/SAM

01f4:Administrator:1:210:14
01f5:Guest:0:8215:4
03e8:HelpAssistant:0:8211:14
03e9:foo:1:210:14

Fields are:

User RID (hex)
User name
Is user admin? (1 = yes, 0 = no) (member of group ID 0x220)
Account flags, ACB (hex). See sam.h file.
Password hash length. 14 = normal password. 0 or 4 = probably blank.

The bulk reset (-r -a) will also output parsable result:


 sampasswd -H -r -a xpreg/SAM

Reset user :01f4:Administrator
Reset user :03e9:pnh

which of course is :RID:username


Explanation on this:
     -r -f -> Reset password of admin user with lowest RID
              not counting built-in admin (0x1f4) unless it is the only admin

All windows from NT3.1 up has a system created administrator account
with RID (user ID) 0x1f4 (500 decimal)

Before Windows XP the installer asked for a password for this account,
and then it was used to login first after installation.
(Built-in guest account was also created by the installer, but it has
always been disabled by default)

On Windows XP and newer systems, the installer also creates this
account, but locks it down, it generally cannot be logged in. It is
also not shown on the welcome screen (unless all other users are
deleted or disabled)
The installer instead asks for a user to create during install. That
user is a normal non-hardwired user (RID > 0x3e8, 1000 decimal),
and it is added to the built-in administrators group (group # 0x220). 

It is users in the built-in group 0x220 that generally has full
administrator rights to the machine.

(XP installer can create several users, but only first gets group
0x220)

More users can of course be added from the control panel, and they can
be put into the 0x220 group if neccessary. From the "simplified"
control panel dialog this is what happens if user is selected to be able to
have full (or admin) access to the machine. If user is set to "normal"
or something like that, it is not in the 0x220 group.

From the "Users and Groups" part of the administrative tools (not
available on some home versions of windows) the group assignments and
other user info can be changed in more detail of course.
From there, users in a domain (if machine is in domain) can also be
added to the local 0x220 group, the domain user full access to that
local machine even if the user is nothing special in the domain.

Anyway..
On XP and newer, it is therefore not the hardwired 0x1f4 account that is
used for admim. On home machines it is most often the first regular one (since
most people do not change any user stuff after the installer) or it
could be any other user in the list.

So this reset function picks the first it finds over 0x3e8 (1000)
that is also in the 0x220 group. It will most likely work for 98% of
home user machines :) Unless there are no users in the 0x220 group,
then it picks the 0x1f4 hard-wired user (since it may be Windows
2000??????).

This may of course be wrong if someone managed to remove all accounts
above 1000 from the 0x220 group. But then they have "samusrgrp" to add
someone back :)


Explanation on -a -r:

The -r -a option will reset all users in the 0x220 group. Also user
0x1f4, which maybe is bad.. will consider changing this...