Home

Welcome to Respeaker wiki!

##Hardware ###Schematic Respeaker Core v1.0 alpha1 sch ###Component Layout Top Layer

Bottom Layer

Serial console

• baudrate: 57600
• driver for windows xp/7/8
• terminal app - on windows, putty is recommended. on linux/mac, use screen /dev/xxx 57600

#Connect to the Internet

• Connect your smart phone/lattop to a Wi-Fi named LinkIt_Smart _xxxxxx and visit 192.168.100.1. After setting a password of respeaker and logining in, you need to select station mode, select a Wi-Fi network and enter the password as the following picture.

Record & play

arecord -M -f S16_LE -r 16000 -c 1 /tmp/sample.wav   # record audio with 16000 sample rate, 16 bit width, 1 channel
aplay -M /tmp/sample.wav  # play wav audio
madplay music.mp3         # play mp3 audio

#Play music with Airplay/DLNA

• With Airplay/DLNA, you can stream music to respeaker.
• To use Airplay/DLNA, you need to connect respeaker and your smart phone to the same Wi-Fi network.

###Use Airplay

• On your iOS device, swipe up from the bottom of your screen to open Control Center.
• Tap AirPlay.
• Select "Shairport Sync on mylinkit", and play music on your iOS device.

• Connect your headphone to respeaker, then you can enjoy the music now.