Name		Name	Last commit message	Last commit date
parent directory ..
external-ceph		external-ceph
local-storage-provisioner		local-storage-provisioner
nfs-client-provisioner		nfs-client-provisioner
nfs-pv		nfs-pv
rook-ceph		rook-ceph
stash		stash
velero		velero
README.md		README.md
minio.yaml		minio.yaml

README.md

local-storage-provisioner

Using the local volume static storage provisioner

local-storage-provisioner

Setup requires some manual steps:

Attach 'disks' as needed to the k8s nodes. In proxmox, it was something like this per node to add a 100GB drive: scsi1: zfs-prox:vm-204-disk-1,discard=on,size=100G,ssd=1
Ensure that cluster.yaml has the following setting for the /mnt directory and rke up ... to apply the change to the cluster:
```
services:
 kubelet:
     extra_binds:
     - "/mnt:/mnt:rshared"
```

Basically follow this guide for each node (assuming new disk is /dev/sdb):

sudo mkfs.ext4 /dev/sdb

DISK_UUID=$(sudo blkid -s UUID -o value /dev/sdb)

sudo mkdir /mnt/$DISK_UUID

sudo mount -t ext4 /dev/sdb /mnt/$DISK_UUID

echo UUID=`sudo blkid -s UUID -o value /dev/sdb` /mnt/$DISK_UUID ext4 defaults 0 2 | sudo tee -a /etc/fstab

for i in $(seq 1 10); do
  sudo mkdir -p /mnt/${DISK_UUID}/vol${i} /mnt/local-disks/${DISK_UUID}_vol${i}; 
  sudo mount --bind /mnt/${DISK_UUID}/vol${i} /mnt/local-disks/${DISK_UUID}_vol${i}; 
done

for i in $(seq 1 10); do 
  echo /mnt/${DISK_UUID}/vol${i} /mnt/local-disks/${DISK_UUID}_vol${i} none bind 0 0 | sudo tee -a /etc/fstab
done

Important Note: The way the local storage provisioner works is such that each PersistentVolume will 'take' one of the /mnt/local-disks/<uuid>_voln 'mounts' and create a PV named something like local-pv-9e858361 which is then consumed by the workload. If it is necessary to run more than 10 local volume PVs, more 'mounts' will need to be created on the nodes.