EN technical specifications

Hardware specifications

Specifications :

• CPU : 1GHz single-core CPU (BCM2835)

• RAM : 512MB RAM

• Display : 320x240px monochrome + touchscreen (XPT2046)

• Sound : speaker and jack output

• Input : Arrows, start, select, a, b, c, l, r

• Communication : 1x mini HDMI, 1x micro USB, 1x micro SD card, 40 GPIO, composite video, camera connector

• Battery : ~6-8h life, 3000mAh LiPo battery, charged through USB

• Power : 5v, asuwantmA max

• Dimensions : 177.15x66.53x30 mm (6.96x2.59x1.18″)

Schematics / 3D model :

• Eagles project : https://github.com/RetroBox/Raspberry-pi-Z-Version/tree/master/pcb

To open the project , you will need : Eagle Autodesk

---

• 3D Simulation : https://github.com/RetroBox/Raspberry-pi-Z-Version/tree/master/3d

To open STL file, you will need a CAD software like : Autocad; Design Spark; SolidWorks; Catia

Case (Plexiglass & 3d case)

They are many possibilities about the color of the RetroBox, but we have default model :

3D model : https://github.com/RetroBox/Raspberry-pi-Z-Version/tree/master/3d

Plexiglass version : https://github.com/RetroBox/Raspberry-pi-Z-Version/tree/master/3d

Bill of Materials

Part	Quantity
- Raspberry Pi Zero W	1
- Screen 3,2 inch	1
- Joystick Arduino	1
- Lithium Charger	1
- Mini HDMI to HDMI + USB OTG	1
- Button momentary	7
- Jack 3,5	1
- Pin Header	40
- PCB	1
- Slide Switch	1
- MCP23017 GPIO	1
- 10K ohm resistor	3
- LM339 Quad Voltage Comparator	1
- 10k Potentiometers	1
- Lithium Battery	1
- 0.01µf Capacitor FILM	2
- 10µf Capacitor	2
- 270 Ohm Resistor	2
- 150 Ohm Resistor	2
- SD Card 8gb	1
- Audio amplifier board	1
- 5V Charger	1
- Cardboard box	1
- Zip bag	1
- Heatsink	1
- USB Female Type A	1
- Led 3mm	1
- Speaker 8 Ohm	1
- 5V regulator	1
- Right Angle momentary switch	2