107. TNC information

These are guides to connect the LoRa Board as a TNC with custom apps.

---

Pinpoint

1. Open Tools -> Options -> TNC (you can click F2 button)

2. Set TNC type: "network KISS mode" for TNC server (via WiFi) or "serial KISS mode" for Serial KISS (via USB cable)

3. Set your LoRa IP :

or Serial port related to TNC type you selected previously.

4. After adding port you can connect or disconnect TNC in Tools -> Connect/Disconnect TNC

---

APRSIS32

1. Click Configure -> Ports -> New Port

2. Set port type as "Simply (KISS)" and set port name as you want (2.jpg)

3. Select port type: TCP/IP for TNC server (via WiFi) or COM Serial for Serial KISS (via USB cable) (3.jpg)

4. Set your LoRa IP

or Serial port (5.jpg) related to port type you selected previously.

5. After adding port you can enable or disable it in Enables -> Ports

---

QTH

1. use TNC tcp/ip.