This repository contains example of riverdi-eve-lib library integration for Raspberry Pi and other linux-based single board computers. Please check riverdi-eve-lib project repository for more info about library itself.
To get started, please make sure, that all libraries and tools for C/C++ development on Raspberry Pi are properly installed and configured, and SPI interface is enabled via raspi-config tool.
| RiBUS connector | Raspberry Pi |
|---|---|
| VDD | 3.3V |
| GND | GND |
| SCLK | 11 |
| MISO | 9 |
| MOSI | 10 |
| CS | 13 |
| INT | 26 |
| PD | 19 |
Note: before compilation, please edit Makefile file to choose Embedded Video Engine series (-DEVE_1, -DEVE_2, -DEVE_3 or -DEVE_4 flags), choose type and size of connected TFT module (choose predefined macros for Riverdi EVE modules or edit timings manually in modules.h file for custom displays) or to adjust compilation settings.
[1] Clone 'riverdi-eve-demo-rpi' repository (with 'riverdi-eve-lib' submodule):
git clone --recursive [email protected]:riverdi/riverdi-eve-demo-rpi.git
[2] Build and run demo application:
cd riverdi-eve-demo-rpi
make
./riverdi-demo
Please contact Riverdi support - [email protected]
See LICENSE.txt file for details.