Concrete ML provides features for advanced users to adjust cryptographic parameters generated by the Concrete stack. This allows users to identify the best trade-off between latency and performance for their specific machine learning models.
Concrete ML makes use of table lookups (TLUs) to represent any non-linear operation (e.g., a sigmoid). TLUs are implemented through the Programmable Bootstrapping (PBS) operation, which applies a non-linear operation in the cryptographic realm.
The result of TLU operations is obtained with a specific error probability. Concrete ML offers the possibility to set this error probability, which influences the cryptographic parameters. The higher the success rate, the more restrictive the parameters become. This can affect both key generation and, more significantly, FHE execution time.
{% hint style="info" %} Concrete ML has a simulation mode where the impact of approximate computation of TLUs on the model accuracy can be determined. The simulation is much faster, speeding up model development significantly. The behavior in simulation mode is representative of the behavior of the model on encrypted data. {% endhint %}
In Concrete ML, there are three different ways to define the error probability:
- setting
p_error, the error probability of an individual TLU (see here) - setting
global_p_error, the error probability of the full circuit (see here) - not setting
p_errornorglobal_p_error, and using default parameters (see here)
{% hint style="warning" %}
p_error and global_p_error are somehow two concurrent parameters, in the sense they both have an impact on the choice of cryptographic parameters. It is forbidden in Concrete ML to set both p_error and global_p_error simultaneously.
{% endhint %}
The first way to set error probabilities in Concrete ML is at the local level, by directly setting the probability of error of each individual TLU. This probability is referred to as p_error. A given PBS operation has a 1 - p_error chance of being successful. The successful evaluation here means that the value decrypted after FHE evaluation is exactly the same as the one that would be computed in the clear.
For simplicity, it is best to use default options, irrespective of the type of model. Especially for deep neural networks, default values may be too pessimistic, reducing computation speed without any improvement in accuracy. For deep neural networks, some TLU errors might not affect the accuracy of the network, so the p_error can be safely increased (e.g., see CIFAR classifications in our showcase).
Here is a visualization of the effect of the p_error on a neural network model with a p_error = 0.1 compared to execution in the clear (i.e., no error):
Varying the p_error in the one hidden-layer neural network above produces the following inference times. Increasing p_error to 0.1 halves the inference time with respect to a p_error of 0.001. In the graph above, the decision boundary becomes noisier with higher p_error.
| p_error | Inference Time (ms) |
|---|---|
| 0.001 | 0.80 |
| 0.01 | 0.41 |
| 0.1 | 0.37 |
The speedup depends on model complexity, but, in an iterative approach, it is possible to search for a good value of p_error to obtain a speedup while maintaining good accuracy. Concrete ML provides a tool to find a good p_error based on binary search algorithm.
Users have the possibility to change this p_error by passing an argument to the compile function of any of the models. Here is an example:
from concrete.ml.sklearn import XGBClassifier
from sklearn.datasets import make_classification
from sklearn.model_selection import train_test_split
x, y = make_classification(n_samples=100, class_sep=2, n_features=4, random_state=42)
# Retrieve train and test sets
X_train, _, y_train, _ = train_test_split(x, y, test_size=10, random_state=42)
clf = XGBClassifier()
clf.fit(X_train, y_train)
# Here we set the p_error parameter
clf.compile(X_train, p_error=0.1)If the p_error value is specified and the simulation is enabled, the run will take into account the randomness induced by the p_error, resulting in statistical similarity to the FHE evaluation.
A global_p_error is also available and defines the probability of success for the entire model. Here, the p_error for every PBS is computed internally in Concrete such that the global_p_error is reached.
There might be cases where the user encounters a No cryptography parameter found error message. Increasing the p_error or the global_p_error in this case might help.
Usage is similar to the p_error parameter:
# Here we set the global_p_error parameter
clf.compile(X_train, global_p_error=0.1)In the above example, XGBoostClassifier in FHE has a 1/10 probability to have a shifted output value compared to the expected value. The shift is relative to the expected value, so even if the result is different, it should be around the expected value.
If neither p_error or global_p_error are set, Concrete ML employs p_error = 2^-40 by default.
Currently finding a good p_error value a-priori is not possible, as it is difficult to determine the impact of the TLU error on the output of a neural network. Concrete ML provides a tool to find a good p_error value that improves inference speed while maintaining accuracy. The method is based on binary search, evaluating the latency/accuracy trade-off iteratively.
from time import time
from sklearn.datasets import make_classification
from sklearn.metrics import accuracy_score
from sklearn.model_selection import train_test_split
from concrete.ml.search_parameters import BinarySearch
from concrete.ml.sklearn import DecisionTreeClassifier
x, y = make_classification(n_samples=100, class_sep=2, n_features=4, random_state=42)
# Retrieve train and test sets
X_train, _, y_train, _ = train_test_split(x, y, test_size=10, random_state=42)
clf = DecisionTreeClassifier(random_state=42)
# Fit the model
clf.fit(X_train, y_train)
# Compile the model with the default `p_error`
fhe_circuit = clf.compile(X_train)
# Key Generation
fhe_circuit.client.keygen(force=False)
start_time = time()
y_pred = clf.predict(X_train, fhe="execute")
end_time = time()
print(f"With the default p_error≈0, the inference time is {(end_time - start_time) / 60:.2f} s")
# Output: With the default p_error≈0, the inference time is 0.89 s
print(f"Accuracy = {accuracy_score(y_pred, y_train):.2%}")
# Output: Accuracy = 100.00%
# Search for the largest `p_error` that provides
# the best compromise between accuracy and computational efficiency in FHE
search = BinarySearch(estimator=clf, predict="predict", metric=accuracy_score)
p_error = search.run(x=X_train, ground_truth=y_train, max_iter=10)
# Compile the model with the optimal `p_error`
fhe_circuit = clf.compile(X_train, p_error=p_error)
# Key Generation
fhe_circuit.client.keygen(force=False)
start_time = time()
y_pred = clf.predict(X_train, fhe="execute")
end_time = time()
print(
f"With p_error={p_error:.5f}, the inference time becomes {(end_time - start_time) / 60:.2f} s"
)
# Ouput: With p_error=0.00043, the inference time becomes 0.56 s
print(f"Accuracy = {accuracy_score(y_pred, y_train): .2%}")
# Output: Accuracy = 100.00%With this optimal p_error, accuracy is maintained while execution time is improved by a factor of 1.51.
Please note that the default setting for the search interval is restricted to a range of 0.0 and 0.9. Increasing the upper bound beyond this range may result in longer execution times, especially when p_error≈1.
To speed-up neural networks, a rounding operator can be applied on the accumulators of linear and convolution layers to retain the most significant bits on which the activation and quantization is applied. The accumulator is represented using
The rounding operation is defined as follows:
First, compute
Then, the rounding operation can be computed as:
where
In Concrete ML, this feature is currently implemented for custom neural networks through the compile functions, including
concrete.ml.torch.compile_torch_model,concrete.ml.torch.compile_onnx_modelandconcrete.ml.torch.compile_brevitas_qat_model.
using rounding_threshold_bits argument can be set to a specific bit-width. It is important to choose an appropriate bit-width threshold to balance the trade-off between speed and accuracy. By reducing the bit-width of intermediate tensors, it is possible to speed-up computations while maintaining accuracy.
{% hint style="warning" %}
The rounding_threshold_bits parameter only works in FHE for TLU input bit-width (
To find the best trade-off between speed and accuracy, it is recommended to experiment with different thresholds and check the accuracy on an evaluation set after compiling the model.
In practice, the process looks like this:
- Set a
rounding_threshold_bitsto a relatively high P. Say, 8 bits. - Check the accuracy
- Update P = P - 1
- repeat steps 2 and 3 until the accuracy loss is above a certain, acceptable threshold.
An example of such implementation is available in evaluate_torch_cml.py and CifarInFheWithSmallerAccumulators.ipynb
By using verbose = True and show_mlir = True during compilation, the user receives a lot of information from Concrete. These options are, however, mainly meant for power-users, so they may be hard to understand.
from concrete.ml.sklearn import DecisionTreeClassifier
from sklearn.datasets import make_classification
from sklearn.model_selection import train_test_split
x, y = make_classification(n_samples=100, class_sep=2, n_features=4, random_state=42)
# Retrieve train and test sets
X_train, _, y_train, _ = train_test_split(x, y, test_size=10, random_state=42)
clf = DecisionTreeClassifier(random_state=42)
clf.fit(X_train, y_train)
clf.compile(X_train, verbose=True, show_mlir=True, p_error=0.033)Here, one will see:
- the computation graph (typically):
Computation Graph
-------------------------------------------------------------------------------------------------------------------------------
%0 = _inputs # EncryptedTensor<uint6, shape=(1, 4)> ∈ [0, 63]
%1 = transpose(%0) # EncryptedTensor<uint6, shape=(4, 1)> ∈ [0, 63]
%2 = [[0 0 0 1]] # ClearTensor<uint1, shape=(1, 4)> ∈ [0, 1]
%3 = matmul(%2, %1) # EncryptedTensor<uint6, shape=(1, 1)> ∈ [0, 63]
%4 = [[32]] # ClearTensor<uint6, shape=(1, 1)> ∈ [32, 32]
%5 = less_equal(%3, %4) # EncryptedTensor<uint1, shape=(1, 1)> ∈ [False, True]
%6 = reshape(%5, newshape=[ 1 1 -1]) # EncryptedTensor<uint1, shape=(1, 1, 1)> ∈ [False, True]
%7 = [[[ 1] [-1]]] # ClearTensor<int2, shape=(1, 2, 1)> ∈ [-1, 1]
%8 = matmul(%7, %6) # EncryptedTensor<int2, shape=(1, 2, 1)> ∈ [-1, 1]
%9 = reshape(%8, newshape=[ 2 -1]) # EncryptedTensor<int2, shape=(2, 1)> ∈ [-1, 1]
%10 = [[1] [0]] # ClearTensor<uint1, shape=(2, 1)> ∈ [0, 1]
%11 = equal(%10, %9) # EncryptedTensor<uint1, shape=(2, 1)> ∈ [False, True]
%12 = reshape(%11, newshape=[ 1 2 -1]) # EncryptedTensor<uint1, shape=(1, 2, 1)> ∈ [False, True]
%13 = [[[63 0] [ 0 63]]] # ClearTensor<uint6, shape=(1, 2, 2)> ∈ [0, 63]
%14 = matmul(%13, %12) # EncryptedTensor<uint6, shape=(1, 2, 1)> ∈ [0, 63]
%15 = reshape(%14, newshape=[ 1 2 -1]) # EncryptedTensor<uint6, shape=(1, 2, 1)> ∈ [0, 63]
return %15
- the MLIR, produced by Concrete:
MLIR
-------------------------------------------------------------------------------------------------------------------------------
module {
func.func @main(%arg0: tensor<1x4x!FHE.eint<6>>) -> tensor<1x2x1x!FHE.eint<6>> {
%cst = arith.constant dense<[[[63, 0], [0, 63]]]> : tensor<1x2x2xi7>
%cst_0 = arith.constant dense<[[1], [0]]> : tensor<2x1xi7>
%cst_1 = arith.constant dense<[[[1], [-1]]]> : tensor<1x2x1xi7>
%cst_2 = arith.constant dense<32> : tensor<1x1xi7>
%cst_3 = arith.constant dense<[[0, 0, 0, 1]]> : tensor<1x4xi7>
%c32_i7 = arith.constant 32 : i7
%0 = "FHELinalg.transpose"(%arg0) {axes = []} : (tensor<1x4x!FHE.eint<6>>) -> tensor<4x1x!FHE.eint<6>>
%cst_4 = tensor.from_elements %c32_i7 : tensor<1xi7>
%1 = "FHELinalg.matmul_int_eint"(%cst_3, %0) : (tensor<1x4xi7>, tensor<4x1x!FHE.eint<6>>) -> tensor<1x1x!FHE.eint<6>>
%cst_5 = arith.constant dense<[1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]> : tensor<64xi64>
%2 = "FHELinalg.apply_lookup_table"(%1, %cst_5) : (tensor<1x1x!FHE.eint<6>>, tensor<64xi64>) -> tensor<1x1x!FHE.eint<6>>
%3 = tensor.expand_shape %2 [[0], [1, 2]] : tensor<1x1x!FHE.eint<6>> into tensor<1x1x1x!FHE.eint<6>>
%4 = "FHELinalg.matmul_int_eint"(%cst_1, %3) : (tensor<1x2x1xi7>, tensor<1x1x1x!FHE.eint<6>>) -> tensor<1x2x1x!FHE.eint<6>>
%5 = tensor.collapse_shape %4 [[0, 1], [2]] : tensor<1x2x1x!FHE.eint<6>> into tensor<2x1x!FHE.eint<6>>
%6 = "FHELinalg.add_eint_int"(%5, %cst_4) : (tensor<2x1x!FHE.eint<6>>, tensor<1xi7>) -> tensor<2x1x!FHE.eint<6>>
%cst_6 = arith.constant dense<"0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"> : tensor<2x64xi64>
%cst_7 = arith.constant dense<[[0], [1]]> : tensor<2x1xindex>
%7 = "FHELinalg.apply_mapped_lookup_table"(%6, %cst_6, %cst_7) : (tensor<2x1x!FHE.eint<6>>, tensor<2x64xi64>, tensor<2x1xindex>) -> tensor<2x1x!FHE.eint<6>>
%8 = tensor.expand_shape %7 [[0, 1], [2]] : tensor<2x1x!FHE.eint<6>> into tensor<1x2x1x!FHE.eint<6>>
%9 = "FHELinalg.matmul_int_eint"(%cst, %8) : (tensor<1x2x2xi7>, tensor<1x2x1x!FHE.eint<6>>) -> tensor<1x2x1x!FHE.eint<6>>
return %9 : tensor<1x2x1x!FHE.eint<6>>
}
}
- information from the optimizer (including cryptographic parameters):
Optimizer
-------------------------------------------------------------------------------------------------------------------------------
--- Circuit
6 bits integers
7 manp (maxi log2 norm2)
388ms to solve
--- User config
3.300000e-02 error per pbs call
1.000000e+00 error per circuit call
--- Complexity for the full circuit
4.214000e+02 Millions Operations
--- Correctness for each Pbs call
1/30 errors (3.234529e-02)
--- Correctness for the full circuit
1/10 errors (9.390887e-02)
--- Parameters resolution
1x glwe_dimension
2**11 polynomial (2048)
762 lwe dimension
keyswitch l,b=5,3
blindrota l,b=2,15
wopPbs : false
---
In this latter optimization, the following information will be provided:
- The bit-width ("6-bit integers") used in the program: for the moment, the compiler only supports a single precision (i.e., that all PBS are promoted to the same bit-width - the largest one). Therefore, this bit-width predominantly drives the speed of the program, and it is essential to reduce it as much as possible for faster execution.
- The maximal norm2 ("7 manp"), which has an impact on the crypto parameters: The larger this norm2, the slower PBS will be. The norm2 is related to the norm of some constants appearing in your program, in a way which will be clarified in the Concrete documentation.
- The probability of error of an individual PBS, which was requested by the user ("3.300000e-02 error per pbs call" in User Config)
- The probability of error of the full circuit, which was requested by the user ("1.000000e+00 error per circuit call" in User Config): Here, the probability 1 stands for "not used", since we had set the individual probability.
- The probability of error of an individual PBS, which is found by the optimizer ("1/30 errors (3.234529e-02)"
- The probability of error of the full circuit which is found by the optimizer ("1/10 errors (9.390887e-02)")
- An estimation of the cost of the circuit ("4.214000e+02 Millions Operations"): Large values indicate a circuit that will execute more slowly.
Here is some further information about cryptographic parameters, for cryptographers only:
- 1x glwe_dimension
- 2**11 polynomial (2048)
- 762 lwe dimension
- keyswitch l,b=5,3
- blindrota l,b=2,15
- wopPbs : false
This optimizer feedback is a work in progress and will be modified and improved in future releases.