filahumsensor.yaml

esphome:
  name: filahumsensor
  friendly_name: FilaHumSensor

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: ""

ota:
  password: ""

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Filahumsensor Fallback Hotspot"
    password: ""

captive_portal:
    

i2c:
  sda: GPIO4
  scl: GPIO5

font:
  - file: "fonts/Roboto-Regular.ttf"
    id: my_font
    size: 9

sensor:
  - platform: dht
    pin: GPIO12
    temperature:
      name: "Filament Temperature 1"
      id: fil_tmp_1
    humidity:
      name: "Filament Humidity 1"
      id: fil_hum_1
      accuracy_decimals: 1
    update_interval: 60s
    
  - platform: dht
    pin: GPIO13
    temperature:
      name: "Filament Temperature 2"
      id: fil_tmp_2
    humidity:
      name: "Filament Humidity 2"
      id: fil_hum_2
      accuracy_decimals: 1
    update_interval: 60s
    

display:
  - platform: "ssd1306_i2c"
    model: SH1106_96x16
    reset_pin: GPIO16
    address: 0x3C
    lambda: |-   
      it.printf(0, 0, id(my_font), TextAlign::TOP_LEFT, "%.1f°", id(fil_tmp_1).state);
      it.printf(0, 8, id(my_font), TextAlign::TOP_LEFT, "%.1f°", id(fil_tmp_2).state);
      it.printf(48, 0, id(my_font), TextAlign::TOP_LEFT, "%.1f%", id(fil_hum_1).state);
      it.printf(48, 8, id(my_font), TextAlign::TOP_LEFT, "%.1f%", id(fil_hum_2).state);