From 5eb8b7793dfdf251f6bf75ae2b1124504844c339 Mon Sep 17 00:00:00 2001 From: Mieczyslaw Nalewaj Date: Wed, 7 Aug 2024 16:59:12 +0200 Subject: [PATCH] bcm53xx: drop 6.1 support Drop config and files for Linux 6.1. Signed-off-by: Mieczyslaw Nalewaj Link: https://github.com/openwrt/openwrt/pull/16103 Signed-off-by: Robert Marko --- target/linux/bcm53xx/config-6.1 | 339 ---- target/linux/bcm53xx/image/Makefile | 2 - ...-Add-devicetree-for-D-Link-DWL-8610A.patch | 165 -- ...4-Add-devicetree-for-D-Link-DIR-890L.patch | 242 --- ...-Correct-description-of-TP-Link-part.patch | 99 - ...m-align-LED-node-names-with-dtschema.patch | 1700 ----------------- ...-Relicense-Rafa-s-code-to-the-GPL-2..patch | 487 ----- ...-Relicense-Florian-s-code-to-the-GPL.patch | 136 -- ...-Relicense-Hauke-s-code-to-the-GPL-2.patch | 249 --- ...-Relicense-AXI-interrupts-code-to-th.patch | 203 -- ...-Specify-MAC-addresses-on-Luxul-devi.patch | 336 ---- ...-Use-updated-device-compatible-strin.patch | 90 - ...-Use-updated-spi-gpio-binding-proper.patch | 82 - ...-dts-BCM5301X-Drop-invalid-usb-cells.patch | 54 - ...-Drop-invalid-properties-from-Meraki.patch | 31 - ...-Relicense-Christian-s-code-to-the-G.patch | 106 - ...-Describe-switch-ports-in-the-main-D.patch | 838 -------- ...-MR26-MR32-remove-bogus-nand-ecc-alg.patch | 63 - ...-MR32-remove-partition-index-numbers.patch | 54 - ...-Add-Netgear-R8000-WiFi-regulator-ma.patch | 61 - ...M5301X-Add-cells-sizes-to-PCIe-nodes.patch | 59 - ...ts-broadcom-add-missing-space-before.patch | 37 - ...-Add-Wi-Fi-regulatory-mappings-for-L.patch | 107 -- ...M5301X-Add-Ethernet-interfaces-links.patch | 53 - ...-Drop-nonexistent-default-off-LED-tr.patch | 57 - ...-Fix-Ethernet-info-for-Luxul-devices.patch | 75 - ...M-dts-bcm5301x-Add-SEAMA-compatibles.patch | 36 - ...-Describe-BCM53125-switch-ports-in-t.patch | 97 - ...-BCM53573-Add-BCM53125-switch-port-5.patch | 36 - ...M53573-Add-Ethernet-interfaces-links.patch | 73 - ...-Disable-second-Ethernet-on-Luxul-de.patch | 39 - ...s-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch | 431 ----- ...CM5301X-Set-MACs-for-D-Link-DIR-885L.patch | 56 - ...1X-Set-MAC-address-for-Asus-RT-AC87U.patch | 44 - ...-Relicense-Felix-s-code-to-the-GPL-2.patch | 57 - ...-Relicense-Vivek-s-code-to-the-GPL-2.patch | 104 - ...-Explicitly-disable-unused-switch-CP.patch | 377 ---- ...-Set-fixed-link-for-extra-Netgear-R8.patch | 47 - ...-Set-switch-ports-for-Linksys-EA9200.patch | 63 - .../080-v6.2-bcma-support-SPROM-rev-11.patch | 28 - ...x-parse-firmware-MTD-partitions-only.patch | 43 - ...support-for-performing-fake-doorbell.patch | 118 -- ...able-MMU-and-Dcache-during-decompres.patch | 101 - ...-Specify-switch-ports-for-remaining-.patch | 675 ------- ...RM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 64 - ...-mark-and-erase-all-remaining-blocks.patch | 59 - .../600-net-disable-GRO-by-default.patch | 36 - ...-frame-size-to-support-just-MTU-1500.patch | 33 - .../905-BCM53573-minor-hacks.patch | 80 - 49 files changed, 8422 deletions(-) delete mode 100644 target/linux/bcm53xx/config-6.1 delete mode 100644 target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch diff --git a/target/linux/bcm53xx/config-6.1 b/target/linux/bcm53xx/config-6.1 deleted file mode 100644 index 259c6559a6b848..00000000000000 --- a/target/linux/bcm53xx/config-6.1 +++ /dev/null @@ -1,339 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y -CONFIG_ARCH_BCM_53573=y -CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_B53=y -CONFIG_B53_MDIO_DRIVER=y -CONFIG_B53_SRAB_DRIVER=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_FALLBACK_SPROM=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_SFLASH=y -# CONFIG_BCM_CYGNUS_PHY is not set -CONFIG_BCM_NET_PHYLIB=y -CONFIG_BCM_NS_THERMAL=y -CONFIG_BCM_SR_THERMAL=y -CONFIG_BGMAC=y -CONFIG_BGMAC_BCMA=y -# CONFIG_BGMAC_PLATFORM is not set -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -CONFIG_BROADCOM_PHY=y -CONFIG_CACHE_L2X0=y -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -# CONFIG_CLK_BCM_NS2 is not set -CONFIG_CLK_BCM_NSP=y -# CONFIG_CLK_BCM_SR is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_IPROC=y -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BCM_5301X=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MISC=y -CONFIG_DEBUG_UART_8250=y -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x18000300 -CONFIG_DEBUG_UART_VIRT=0xf1000300 -CONFIG_DEBUG_USER=y -CONFIG_DMA_OPS=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_BCM_XGS_IPROC=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GRO_CELLS=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_BCM2835=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -# CONFIG_LEDS_BCM63138 is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BCM_IPROC=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BUS_MUX=y -# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XXSFLASH=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_NAND_BRCMNAND=y -CONFIG_MTD_NAND_BRCMNAND_IPROC=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_OF_PARTS_LINKSYS_NS=y -CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_TAG_BRCM=y -CONFIG_NET_DSA_TAG_BRCM_COMMON=y -CONFIG_NET_DSA_TAG_BRCM_LEGACY=y -CONFIG_NET_DSA_TAG_BRCM_PREPEND=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_NVMEM_BRCM_NVRAM=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCIE_IPROC=y -CONFIG_PCIE_IPROC_BCMA=y -# CONFIG_PCIE_IPROC_PLATFORM is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYLINK=y -# CONFIG_PHY_BCM_NS_USB2 is not set -# CONFIG_PHY_BCM_NS_USB3 is not set -# CONFIG_PHY_BCM_SR_PCIE is not set -CONFIG_PHY_BCM_SR_USB=y -# CONFIG_PHY_BRCM_SATA is not set -# CONFIG_PHY_NS2_USB_DRD is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_IPROC_GPIO is not set -CONFIG_PINCTRL_NS=y -# CONFIG_PINCTRL_NS2_MUX is not set -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_BCM_IPROC=y -CONFIG_PWM_SYSFS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BCM_QSPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile index f74fa6cbded8bd..e02eba387c85f9 100644 --- a/target/linux/bcm53xx/image/Makefile +++ b/target/linux/bcm53xx/image/Makefile @@ -127,9 +127,7 @@ define Build/dwl8610ap-image mv $@.new $@ endef -ifneq ($(KERNEL),6.1) DTS_DIR := $(DTS_DIR)/broadcom -endif DEVICE_VARS += ASUS_PRODUCTID DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch deleted file mode 100644 index 0439e38991e9aa..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Wed, 19 Oct 2022 21:34:49 +0200 -Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP - -This adds a device tree for the BCM53016-based D-Link DWL-8610AP -access point wireless router. - -The TRX-format partitions had to be named "firmware" due to -an OpenWrt patch that only accepts parting such nodes if they -are named "firmware". - -Signed-off-by: Linus Walleij -Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/Makefile | 1 + - .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++ - 2 files changed, 132 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-netgear-r8500.dtb \ - bcm47094-phicomm-k3.dtb \ - bcm53015-meraki-mr26.dtb \ -+ bcm53016-dlink-dwl-8610ap.dtb \ - bcm53016-meraki-mr32.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts -@@ -0,0 +1,131 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+#include -+#include -+ -+/ { -+ model = "D-Link DWL-8610AP"; -+ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; -+ -+ memory@0 { -+ device_type = "memory"; -+ /* 512 MB RAM in 2 x Macronix D9PSH chips */ -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power { -+ function = LED_FUNCTION_POWER; -+ color = ; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ default-state = "on"; -+ }; -+ -+ diag { -+ /* Actually "diag" unclear what this means */ -+ function = LED_FUNCTION_INDICATOR; -+ color = ; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ wlan-2g { -+ function = LED_FUNCTION_WLAN; -+ color = ; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wlan-5g { -+ function = LED_FUNCTION_WLAN; -+ color = ; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ button-reset { -+ debounce-interval = <100>; -+ wakeup-source; -+ linux,code = ; -+ label = "reset"; -+ /* This GPIO is actually stored in NVRAM, but it's not gonna change */ -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ /* -+ * Flash memory at 0x1e000000-0x1fffffff -+ * Macronix 32 64KB blocks; total size 2MB, same that can be -+ * found attached to the spi_nor SPI controller. -+ */ -+ nvram@1e080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1e080000 0x00020000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ -+ et1macaddr: et1macaddr { -+ }; -+ }; -+}; -+ -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&gmac1 { -+ nvmem-cells = <&et1macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&spi_nor { -+ /* Serial SPI NOR Flash MX 25L1606E */ -+ status = "okay"; -+}; -+ -+&nandcs { -+ /* -+ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory -+ * -+ * This ECC is a bit unorthodox but it is what the stock firmware -+ * is using, so to be able to mount the original partitions -+ * this is necessary. -+ */ -+ nand-ecc-strength = <5>; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* This is named nflash1.trx in CFE */ -+ trx@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x02800000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ /* This is named nflash1.trx2 in CFE */ -+ trx2@2800000 { -+ label = "firmware2"; -+ reg = <0x02800000 0x02800000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ /* This is named nflash1.rwfs in CFE */ -+ free@5000000 { -+ label = "free"; -+ reg = <0x05000000 0x03000000>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch deleted file mode 100644 index 21bb94fcc34e69..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch +++ /dev/null @@ -1,242 +0,0 @@ -From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Mon, 7 Nov 2022 14:41:04 +0100 -Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L - -This adds a device tree for the D-Link DIR-890L. This device -is very similar to D-Link DIR-885L, the differences are detailed -as a comment in the DTS file. - -Signed-off-by: Linus Walleij -Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++ - 2 files changed, 212 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-asus-rt-ac88u.dtb \ - bcm47094-dlink-dir-885l.dtb \ -+ bcm47094-dlink-dir-890l.dtb \ - bcm47094-linksys-panamera.dtb \ - bcm47094-luxul-abr-4500.dtb \ - bcm47094-luxul-xap-1610.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -@@ -0,0 +1,211 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Device tree for D-Link DIR-890L -+ * D-Link calls this board "WRGAC36" -+ * this router has the same looks and form factor as D-Link DIR-885L. -+ * -+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs -+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no -+ * router/extender switch is mounted (there is an empty mount point on the -+ * PCB) so this device is a pure router. Also the LAN ports are in the right -+ * order. -+ * -+ * Based on the device tree for DIR-885L -+ * Copyright (C) 2016 Rafał Miłecki -+ * Copyright (C) 2022 Linus Walleij -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch1.dtsi" -+ -+/ { -+ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "D-Link DIR-890L"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200 earlycon"; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; -+ }; -+ -+ leds { -+ /* -+ * LED information is derived from the boot log which -+ * conveniently lists all the LEDs. -+ */ -+ compatible = "gpio-leds"; -+ -+ power-white { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wan-white { -+ label = "bcm53xx:white:wan"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ power-amber { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wan-amber { -+ label = "bcm53xx:amber:wan"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb3-white { -+ label = "bcm53xx:white:usb3"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ usb2-white { -+ label = "bcm53xx:white:usb2"; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:white:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ }; -+ -+ 5ghz { -+ label = "bcm53xx:white:5ghz"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ -+ button-wps { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Called "factory reset" in the vendor dmesg */ -+ button-restart { -+ label = "Reset"; -+ linux,code = ; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ /* -+ * The flash memory is memory mapped at 0x1e000000-0x1fffffff -+ * 64KB blocks; total size 2MB, same that can be -+ * found attached to the spi_nor SPI controller. -+ */ -+ nvram@1e1f0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1e1f0000 0x00010000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+}; -+ -+&gmac2 { -+ /* -+ * The NVRAM curiously does not contain a MAC address -+ * for et2 so since that is the only ethernet interface -+ * actually in use on the platform, we use this et0 MAC -+ * address for et2. -+ */ -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; -+ -+&nandcs { -+ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* -+ * This is called "nflash" in the vendor kernel with -+ * "upgrade" and "rootfs" (probably using OpenWrt -+ * splitpart). We call it "firmware" like standard tools -+ * assume. The CFE loader contains incorrect information -+ * about TRX partitions, ignore this, there are no TRX -+ * partitions: this device uses SEAMA. -+ */ -+ firmware@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x08000000>; -+ }; -+ }; -+}; -+ -+&usb2 { -+ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; -+}; -+ -+&usb3 { -+ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+}; -+ -+&usb3_phy { -+ status = "okay"; -+}; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ reg = <0>; -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ label = "cpu"; -+ ethernet = <&gmac2>; -+ phy-mode = "rgmii"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch deleted file mode 100644 index 4c4ed036b90266..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch +++ /dev/null @@ -1,99 +0,0 @@ -From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 8 Nov 2022 12:07:08 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -TP-Link routers have flash space partitioned according to the partitions -table. It may look like fixed partitioning but those partitions can be -actually reorganized. New can be added (or some removed), offsets and -sizes may change. - -Fix DT to use binding for the TP-Link SafeLoader partitioning method. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++--------------- - .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 25 ++++--------------- - 2 files changed, 10 insertions(+), 40 deletions(-) - ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -95,30 +95,15 @@ - status = "okay"; - - partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -+ compatible = "tplink,safeloader-partitions"; -+ partitions-table-offset = <0xe50000>; - -- boot@0 { -- label = "boot"; -- reg = <0x000000 0x040000>; -- read-only; -- }; -- -- os-image@100000 { -- label = "os-image"; -- reg = <0x040000 0x200000>; -+ partition-os-image { - compatible = "brcm,trx"; - }; - -- rootfs@240000 { -- label = "rootfs"; -- reg = <0x240000 0xc00000>; -- }; -- -- nvram@ff0000 { -- label = "nvram"; -- reg = <0xff0000 0x010000>; -+ partition-file-system { -+ linux,rootfs; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -104,30 +104,15 @@ - status = "okay"; - - partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -+ compatible = "tplink,safeloader-partitions"; -+ partitions-table-offset = <0xe50000>; - -- boot@0 { -- label = "boot"; -- reg = <0x000000 0x040000>; -- read-only; -- }; -- -- os-image@100000 { -- label = "os-image"; -- reg = <0x040000 0x200000>; -+ partition-os-image { - compatible = "brcm,trx"; - }; - -- rootfs@240000 { -- label = "rootfs"; -- reg = <0x240000 0xc00000>; -- }; -- -- nvram@ff0000 { -- label = "nvram"; -- reg = <0xff0000 0x010000>; -+ partition-file-system { -+ linux,rootfs; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch b/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch deleted file mode 100644 index d6bf49d0cd2127..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch +++ /dev/null @@ -1,1700 +0,0 @@ -From af84101e3f2258a303fa2461ebec0878ce23ea10 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Fri, 25 Nov 2022 15:41:27 +0100 -Subject: [PATCH] ARM: dts: broadcom: align LED node names with dtschema - -The node names should be generic and DT schema expects certain pattern: - - bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' - -Signed-off-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20221125144128.477059-1-krzysztof.kozlowski@linaro.org -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 15 +++++----- - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 +++--- - .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 16 +++++------ - .../boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 16 +++++------ - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 6 ++-- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 10 +++---- - .../arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 10 +++---- - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 22 +++++++-------- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 10 +++---- - .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 14 +++++----- - .../boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 16 +++++------ - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 6 ++-- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 20 ++++++------- - .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 18 ++++++------ - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 6 ++-- - .../boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 18 ++++++------ - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 16 +++++------ - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 +++++++-------- - .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 18 ++++++------ - arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 12 ++++---- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 14 +++++----- - arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 16 +++++------ - .../boot/dts/bcm47094-linksys-panamera.dts | 28 +++++++++---------- - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +-- - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 6 ++-- - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +-- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 20 ++++++------- - .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 10 +++---- - arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 14 +++++----- - arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 4 +-- - arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 10 +++---- - arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 14 +++++----- - .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 8 +++--- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 6 ++-- - arch/arm/boot/dts/bcm947189acdbmr.dts | 6 ++-- - 37 files changed, 223 insertions(+), 224 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -28,40 +28,39 @@ - leds { - compatible = "gpio-leds"; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:blue:usb3"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:blue:wan"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - }; - -- lan { -+ led-lan { - label = "bcm53xx:blue:lan"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - }; - -- power { -+ led-power { - label = "bcm53xx:blue:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- all { -+ led-all { - label = "bcm53xx:blue:all"; - gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - }; - -- -- usb2 { -+ led-usb2 { - label = "bcm53xx:blue:usb2"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -28,24 +28,24 @@ - leds { - compatible = "gpio-leds"; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:blue:usb2"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - }; - -- power { -+ led-power { - label = "bcm53xx:blue:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- logo { -+ led-logo { - label = "bcm53xx:white:logo"; - gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:blue:usb3"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -@@ -37,7 +37,7 @@ - leds { - compatible = "gpio-leds"; - -- usb { -+ led-usb { - /* label = "bcm53xx:blue:usb"; */ - function = LED_FUNCTION_USB; - color = ; -@@ -48,14 +48,14 @@ - linux,default-trigger = "usbport"; - }; - -- power0 { -+ led-power0 { - /* label = "bcm53xx:red:power"; */ - function = LED_FUNCTION_FAULT; - color = ; - gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - }; - -- power1 { -+ led-power1 { - /* label = "bcm53xx:white:power"; */ - function = LED_FUNCTION_POWER; - color = ; -@@ -63,7 +63,7 @@ - linux,default-trigger = "default-on"; - }; - -- router0 { -+ led-router0 { - /* label = "bcm53xx:blue:router"; */ - function = LED_FUNCTION_STATUS; - color = ; -@@ -71,14 +71,14 @@ - linux,default-trigger = "default-on"; - }; - -- router1 { -+ led-router1 { - /* label = "bcm53xx:amber:router"; */ - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - }; - -- wan { -+ led-wan { - /* label = "bcm53xx:blue:wan"; */ - function = LED_FUNCTION_WAN; - color = ; -@@ -86,14 +86,14 @@ - linux,default-trigger = "default-on"; - }; - -- wireless0 { -+ led-wireless0 { - /* label = "bcm53xx:blue:wireless"; */ - function = LED_FUNCTION_WLAN; - color = ; - gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - }; - -- wireless1 { -+ led-wireless1 { - /* label = "bcm53xx:amber:wireless"; */ - function = LED_FUNCTION_WLAN; - color = ; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -49,7 +49,7 @@ - leds { - compatible = "gpio-leds"; - -- usb { -+ led-usb { - label = "bcm53xx:blue:usb"; - gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -58,40 +58,40 @@ - linux,default-trigger = "usbport"; - }; - -- power0 { -+ led-power0 { - label = "bcm53xx:red:power"; - gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:white:power"; - gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- router0 { -+ led-router0 { - label = "bcm53xx:blue:router"; - gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- router1 { -+ led-router1 { - label = "bcm53xx:amber:router"; - gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:blue:wan"; - gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- wireless0 { -+ led-wireless0 { - label = "bcm53xx:blue:wireless"; - gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - }; - -- wireless1 { -+ led-wireless1 { - label = "bcm53xx:amber:wireless"; - gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -23,19 +23,19 @@ - leds { - compatible = "gpio-leds"; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -42,7 +42,7 @@ - leds { - compatible = "gpio-leds"; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "timer"; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -29,24 +29,24 @@ - leds { - compatible = "gpio-leds"; - -- logo { -+ led-logo { - label = "bcm53xx:white:logo"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- power0 { -+ led-power0 { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- usb { -+ led-usb { - label = "bcm53xx:blue:usb"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -54,7 +54,7 @@ - linux,default-trigger = "usbport"; - }; - -- wireless { -+ led-wireless { - label = "bcm53xx:blue:wireless"; - gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -28,29 +28,29 @@ - leds { - compatible = "gpio-leds"; - -- logo { -+ led-logo { - label = "bcm53xx:white:logo"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- power0 { -+ led-power0 { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- usb { -+ led-usb { - label = "bcm53xx:blue:usb"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - }; - -- wireless { -+ led-wireless { - label = "bcm53xx:blue:wireless"; - gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -28,64 +28,64 @@ - leds { - compatible = "gpio-leds"; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:white:usb2"; - gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port2>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - -- usb3-white { -+ led-usb3-white { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - trigger-sources = <&xhci_port1>; - linux,default-trigger = "usbport"; - }; - -- usb3-green { -+ led-usb3-green { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - -- wps { -+ led-wps { - label = "bcm53xx:white:wps"; - gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - }; - -- status-red { -+ led-status-red { - label = "bcm53xx:red:status"; - gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - }; - -- status-green { -+ led-status-green { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; - -- status-blue { -+ led-status-blue { - label = "bcm53xx:blue:status"; - gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - }; - -- wan-white { -+ led-wan-white { - label = "bcm53xx:white:wan"; - gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; - -- wan-red { -+ led-wan-red { - label = "bcm53xx:red:wan"; - gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -28,30 +28,30 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - label = "bcm53xx:blue:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:blue:usb2"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:blue:wan"; - gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- lan { -+ led-lan { - label = "bcm53xx:blue:lan"; - gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:blue:usb3"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -49,40 +49,40 @@ - leds { - compatible = "gpio-leds"; - -- power0 { -+ led-power0 { - label = "bcm53xx:green:power"; - gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:red:power"; - gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - }; - -- router0 { -+ led-router0 { - label = "bcm53xx:green:router"; - gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- router1 { -+ led-router1 { - label = "bcm53xx:amber:router"; - gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:green:wan"; - gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- wireless0 { -+ led-wireless0 { - label = "bcm53xx:green:wireless"; - gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - }; - -- wireless1 { -+ led-wireless1 { - label = "bcm53xx:amber:wireless"; - gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -49,45 +49,45 @@ - leds { - compatible = "gpio-leds"; - -- usb { -+ led-usb { - label = "bcm53xx:green:usb"; - gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - }; - -- power0 { -+ led-power0 { - label = "bcm53xx:green:power"; - gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:red:power"; - gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - }; - -- router0 { -+ led-router0 { - label = "bcm53xx:green:router"; - gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- router1 { -+ led-router1 { - label = "bcm53xx:amber:router"; - gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:green:wan"; - gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- wireless0 { -+ led-wireless0 { - label = "bcm53xx:green:wireless"; - gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - }; - -- wireless1 { -+ led-wireless1 { - label = "bcm53xx:amber:wireless"; - gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -23,19 +23,19 @@ - leds { - compatible = "gpio-leds"; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -29,62 +29,62 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- lan3 { -+ led-lan3 { - label = "bcm53xx:green:lan3"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- lan4 { -+ led-lan4 { - label = "bcm53xx:green:lan4"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- wan { -+ led-wan { - label = "bcm53xx:green:wan"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- lan2 { -+ led-lan2 { - label = "bcm53xx:green:lan2"; - gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- usb { -+ led-usb { - label = "bcm53xx:green:usb"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port2>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:green:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:green:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - -- lan1 { -+ led-lan1 { - label = "bcm53xx:green:lan1"; - gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -23,50 +23,50 @@ - leds { - compatible = "gpio-leds"; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:green:2ghz"; - gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - }; - -- lan { -+ led-lan { - label = "bcm53xx:green:lan"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - }; - -- usb2-port1 { -+ led-usb2-port1 { - label = "bcm53xx:green:usb2-port1"; - gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - -- power { -+ led-power { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- wan-green { -+ led-wan-green { - label = "bcm53xx:green:wan"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - }; - -- wps { -+ led-wps { - label = "bcm53xx:green:wps"; - gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:green:5ghz"; - gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; - -- usb2-port2 { -+ led-usb2-port2 { - label = "bcm53xx:green:usb2-port2"; - gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port2>, <&ehci_port2>; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -28,18 +28,18 @@ - leds { - compatible = "gpio-leds"; - -- wps { -+ led-wps { - label = "bcm53xx:blue:wps"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - }; - -- power { -+ led-power { - label = "bcm53xx:blue:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- wan { -+ led-wan { - label = "bcm53xx:red:wan"; - gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -28,48 +28,48 @@ - leds { - compatible = "gpio-leds"; - -- usb { -+ led-usb { - label = "bcm53xx:green:usb"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - }; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- router-amber { -+ led-router-amber { - label = "bcm53xx:amber:router"; - gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - }; - -- router-white { -+ led-router-white { - label = "bcm53xx:white:router"; - gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; - -- wan-white { -+ led-wan-white { - label = "bcm53xx:white:wan"; - gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - }; - -- wireless-amber { -+ led-wireless-amber { - label = "bcm53xx:amber:wireless"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - }; - -- wireless-white { -+ led-wireless-white { - label = "bcm53xx:white:wireless"; - gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -28,43 +28,43 @@ - leds { - compatible = "gpio-leds"; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:white:5ghz"; - gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:white:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- wps { -+ led-wps { - label = "bcm53xx:white:wps"; - gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - }; - -- wireless { -+ led-wireless { - label = "bcm53xx:white:wireless"; - gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:white:usb2"; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -39,59 +39,59 @@ - leds { - compatible = "gpio-leds"; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- wan-white { -+ led-wan-white { - label = "bcm53xx:white:wan"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz-1 { -+ led-5ghz-1 { - label = "bcm53xx:white:5ghz-1"; - gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:white:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- wireless { -+ led-wireless { - label = "bcm53xx:white:wireless"; - gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - }; - -- wps { -+ led-wps { - label = "bcm53xx:white:wps"; - gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz-2 { -+ led-5ghz-2 { - label = "bcm53xx:white:5ghz-2"; - gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:white:usb2"; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -23,27 +23,27 @@ - leds { - compatible = "gpio-leds"; - -- lan { -+ led-lan { - label = "bcm53xx:blue:lan"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - }; - -- wps { -+ led-wps { - label = "bcm53xx:blue:wps"; - gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:blue:usb3"; - gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -51,24 +51,24 @@ - linux,default-trigger = "usbport"; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:blue:usb2"; - gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port2>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - -- wan-blue { -+ led-wan-blue { - label = "bcm53xx:blue:wan"; - gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - }; - -- power { -+ led-power { - label = "bcm53xx:blue:power"; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; ---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -@@ -33,37 +33,37 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - label = "white:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- wan-red { -+ led-wan-red { - label = "red:wan"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - }; - -- lan { -+ led-lan { - label = "white:lan"; - gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; - }; - -- usb2 { -+ led-usb2 { - label = "white:usb2"; - gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - trigger-sources = <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - -- usb3 { -+ led-usb3 { - label = "white:usb3"; - gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - trigger-sources = <&ehci_port1>, <&xhci_port1>; - linux,default-trigger = "usbport"; - }; - -- wps { -+ led-wps { - label = "white:wps"; - gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -43,28 +43,28 @@ - leds { - compatible = "gpio-leds"; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- wan-white { -+ led-wan-white { - label = "bcm53xx:white:wan"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- usb3-white { -+ led-usb3-white { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -72,12 +72,12 @@ - linux,default-trigger = "usbport"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:white:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:white:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -@@ -41,47 +41,47 @@ - */ - compatible = "gpio-leds"; - -- power-white { -+ led-power-white { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- wan-white { -+ led-wan-white { - label = "bcm53xx:white:wan"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - }; - -- power-amber { -+ led-power-amber { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - }; - -- wan-amber { -+ led-wan-amber { - label = "bcm53xx:amber:wan"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- usb3-white { -+ led-usb3-white { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&xhci_port1>; - linux,default-trigger = "usbport"; - }; - -- usb2-white { -+ led-usb2-white { - label = "bcm53xx:white:usb2"; - gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:white:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:white:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -52,19 +52,19 @@ - leds { - compatible = "gpio-leds"; - -- wps { -+ led-wps { - label = "bcm53xx:white:wps"; - gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:green:usb2"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port2>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -72,58 +72,58 @@ - linux,default-trigger = "usbport"; - }; - -- power { -+ led-power { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- wifi-disabled { -+ led-wifi-disabled { - label = "bcm53xx:amber:wifi-disabled"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - }; - -- wifi-enabled { -+ led-wifi-enabled { - label = "bcm53xx:white:wifi-enabled"; - gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - }; - -- bluebar1 { -+ led-bluebar1 { - label = "bcm53xx:white:bluebar1"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - }; - -- bluebar2 { -+ led-bluebar2 { - label = "bcm53xx:white:bluebar2"; - gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; - -- bluebar3 { -+ led-bluebar3 { - label = "bcm53xx:white:bluebar3"; - gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; - }; - -- bluebar4 { -+ led-bluebar4 { - label = "bcm53xx:white:bluebar4"; - gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -- bluebar5 { -+ led-bluebar5 { - label = "bcm53xx:white:bluebar5"; - gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; - }; - -- bluebar6 { -+ led-bluebar6 { - label = "bcm53xx:white:bluebar6"; - gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; - }; - -- bluebar7 { -+ led-bluebar7 { - label = "bcm53xx:white:bluebar7"; - gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; - }; - -- bluebar8 { -+ led-bluebar8 { - label = "bcm53xx:white:bluebar8"; - gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -30,13 +30,13 @@ - leds { - compatible = "gpio-leds"; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -23,18 +23,18 @@ - leds { - compatible = "gpio-leds"; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -30,13 +30,13 @@ - leds { - compatible = "gpio-leds"; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "timer"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -25,7 +25,7 @@ - leds { - compatible = "gpio-leds"; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -30,38 +30,38 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- lan3 { -+ led-lan3 { - label = "bcm53xx:green:lan3"; - gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - }; - -- lan4 { -+ led-lan4 { - label = "bcm53xx:green:lan4"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - }; - -- wan { -+ led-wan { - label = "bcm53xx:green:wan"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- lan1 { -+ led-lan1 { - label = "bcm53xx:green:lan1"; - gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - }; - -- lan2 { -+ led-lan2 { - label = "bcm53xx:green:lan2"; - gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -69,18 +69,18 @@ - linux,default-trigger = "usbport"; - }; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:green:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:green:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -33,13 +33,13 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:green:usb3"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>, -@@ -47,18 +47,18 @@ - linux,default-trigger = "usbport"; - }; - -- status { -+ led-status { - label = "bcm53xx:green:status"; - gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:green:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:green:5ghz"; - gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -25,38 +25,38 @@ - leds { - compatible = "gpio-leds"; - -- power0 { -+ led-power0 { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; - }; - -- power1 { -+ led-power1 { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; - -- 5ghz-1 { -+ led-5ghz-1 { - label = "bcm53xx:white:5ghz-1"; - gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - }; - -- 5ghz-2 { -+ led-5ghz-2 { - label = "bcm53xx:white:5ghz-2"; - gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:white:2ghz"; - gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - }; - -- usb2 { -+ led-usb2 { - label = "bcm53xx:white:usb2"; - gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - }; - -- usb3 { -+ led-usb3 { - label = "bcm53xx:white:usb3"; - gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - }; ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -23,13 +23,13 @@ - leds { - compatible = "gpio-leds"; - -- wlan { -+ led-wlan { - label = "bcm53xx:blue:wlan"; - gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; - }; - -- system { -+ led-system { - label = "bcm53xx:green:system"; - gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "timer"; ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -20,26 +20,26 @@ - reg = <0x00000000 0x08000000>; - }; - -- leds { -+ leds-0 { - compatible = "gpio-leds"; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - -- system { -+ led-system { - label = "bcm53xx:green:system"; - gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "timer"; - }; - }; - -- pcie0_leds { -+ leds-1 { - compatible = "gpio-leds"; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; ---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -@@ -20,37 +20,37 @@ - reg = <0x00000000 0x08000000>; - }; - -- leds { -+ leds-0 { - compatible = "gpio-leds"; - -- usb { -+ led-usb { - label = "bcm53xx:blue:usb"; - gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - -- wps { -+ led-wps { - label = "bcm53xx:blue:wps"; - gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - }; - -- system { -+ led-system { - label = "bcm53xx:blue:system"; - gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "timer"; - }; - }; - -- pcie0_leds { -+ leds-1 { - compatible = "gpio-leds"; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts -+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts -@@ -20,14 +20,14 @@ - leds { - compatible = "gpio-leds"; - -- power { -+ led-power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - -- diag { -+ led-diag { - /* Actually "diag" unclear what this means */ - function = LED_FUNCTION_INDICATOR; - color = ; -@@ -36,13 +36,13 @@ - linux,default-trigger = "heartbeat"; - }; - -- wlan-2g { -+ led-wlan-2g { - function = LED_FUNCTION_WLAN; - color = ; - gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - }; - -- wlan-5g { -+ led-wlan-5g { - function = LED_FUNCTION_WLAN; - color = ; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -58,7 +58,7 @@ - pwm-leds { - compatible = "pwm-leds"; - -- red { -+ led-0 { - /* SYS-LED 1 - Tricolor */ - function = LED_FUNCTION_INDICATOR; - color = ; -@@ -66,7 +66,7 @@ - max-brightness = <255>; - }; - -- green { -+ led-1 { - /* SYS-LED 1 - Tricolor */ - function = LED_FUNCTION_POWER; - color = ; -@@ -74,7 +74,7 @@ - max-brightness = <255>; - }; - -- blue { -+ led-2 { - /* SYS-LED 1 - Tricolor */ - function = LED_FUNCTION_INDICATOR; - color = ; ---- a/arch/arm/boot/dts/bcm947189acdbmr.dts -+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts -@@ -25,17 +25,17 @@ - leds { - compatible = "gpio-leds"; - -- wps { -+ led-wps { - label = "bcm53xx:blue:wps"; - gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - }; - -- 5ghz { -+ led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - }; - -- 2ghz { -+ led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch deleted file mode 100644 index 4744e6d5b15409..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch +++ /dev/null @@ -1,487 +0,0 @@ -From 915fac07f053418d0ab9075af64da2872ca8a7f8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 3 May 2023 14:16:10 +0200 -Subject: [PATCH] =?UTF-8?q?ARM:=20dts:=20BCM5301X:=20Relicense=20Rafa?= - =?UTF-8?q?=C5=82's=20code=20to=20the=20GPL=202.0+=20/=20MIT?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -All BCM5301X device DTS files use dual licensing. Try the same for SoC. -Introduce a new .dtsi file with a proper SPDX tag. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230503121611.1629-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - MAINTAINERS | 1 + - arch/arm/boot/dts/bcm-ns.dtsi | 202 ++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 192 +----------------------------- - 3 files changed, 205 insertions(+), 190 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm-ns.dtsi - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -4063,6 +4063,7 @@ M: Rafał Miłecki - R: Broadcom internal kernel review list - L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) - S: Maintained -+F: arch/arm/boot/dts/bcm-ns.dtsi - F: arch/arm/boot/dts/bcm470* - F: arch/arm/boot/dts/bcm5301* - F: arch/arm/boot/dts/bcm953012* ---- /dev/null -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -0,0 +1,202 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include -+#include -+#include -+#include -+#include -+ -+/ { -+ axi@18000000 { -+ compatible = "brcm,bus-axi"; -+ reg = <0x18000000 0x1000>; -+ ranges = <0x00000000 0x18000000 0x00100000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ chipcommon: chipcommon@0 { -+ reg = <0x00000000 0x1000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ pcie0: pcie@12000 { -+ reg = <0x00012000 0x1000>; -+ }; -+ -+ pcie1: pcie@13000 { -+ reg = <0x00013000 0x1000>; -+ }; -+ -+ usb2: usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ interrupt-parent = <&gic>; -+ -+ ehci: usb@21000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-ehci"; -+ reg = <0x00021000 0x1000>; -+ interrupts = ; -+ phys = <&usb2_phy>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ehci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ ehci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ -+ ohci: usb@22000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-ohci"; -+ reg = <0x00022000 0x1000>; -+ interrupts = ; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ohci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ ohci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ }; -+ -+ usb3: usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ interrupt-parent = <&gic>; -+ -+ xhci: usb@23000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-xhci"; -+ reg = <0x00023000 0x1000>; -+ interrupts = ; -+ phys = <&usb3_phy>; -+ phy-names = "usb"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ xhci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ }; -+ }; -+ -+ mdio: mdio@18003000 { -+ compatible = "brcm,iproc-mdio"; -+ reg = <0x18003000 0x8>; -+ #size-cells = <0>; -+ #address-cells = <1>; -+ }; -+ -+ dmu-bus@1800c000 { -+ compatible = "simple-bus"; -+ ranges = <0 0x1800c000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ cru-bus@100 { -+ compatible = "brcm,ns-cru", "simple-mfd"; -+ reg = <0x100 0x1a4>; -+ ranges; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ usb2_phy: phy@164 { -+ compatible = "brcm,ns-usb2-phy"; -+ reg = <0x164 0x4>; -+ brcm,syscon-clkset = <&cru_clkset>; -+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; -+ clock-names = "phy-ref-clk"; -+ #phy-cells = <0>; -+ }; -+ -+ cru_clkset: syscon@180 { -+ compatible = "brcm,cru-clkset", "syscon"; -+ reg = <0x180 0x4>; -+ }; -+ -+ pinctrl: pinctrl@1c0 { -+ compatible = "brcm,bcm4708-pinmux"; -+ reg = <0x1c0 0x24>; -+ reg-names = "cru_gpio_control"; -+ -+ spi-pins { -+ groups = "spi_grp"; -+ function = "spi"; -+ }; -+ -+ pinmux_i2c: i2c-pins { -+ groups = "i2c_grp"; -+ function = "i2c"; -+ }; -+ -+ pinmux_pwm: pwm-pins { -+ groups = "pwm0_grp", "pwm1_grp", -+ "pwm2_grp", "pwm3_grp"; -+ function = "pwm"; -+ }; -+ -+ pinmux_uart1: uart1-pins { -+ groups = "uart1_grp"; -+ function = "uart1"; -+ }; -+ }; -+ -+ thermal: thermal@2c0 { -+ compatible = "brcm,ns-thermal"; -+ reg = <0x2c0 0x10>; -+ #thermal-sensor-cells = <0>; -+ }; -+ }; -+ }; -+ -+ thermal-zones { -+ cpu_thermal: cpu-thermal { -+ polling-delay-passive = <0>; -+ polling-delay = <1000>; -+ coefficients = <(-556) 418000>; -+ thermal-sensors = <&thermal>; -+ -+ trips { -+ cpu-crit { -+ temperature = <125000>; -+ hysteresis = <0>; -+ type = "critical"; -+ }; -+ }; -+ -+ cooling-maps { -+ }; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -8,11 +8,7 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - --#include --#include --#include --#include --#include -+#include "bcm-ns.dtsi" - - / { - #address-cells = <1>; -@@ -149,12 +145,6 @@ - }; - - axi@18000000 { -- compatible = "brcm,bus-axi"; -- reg = <0x18000000 0x1000>; -- ranges = <0x00000000 0x18000000 0x00100000>; -- #address-cells = <1>; -- #size-cells = <1>; -- - #interrupt-cells = <1>; - interrupt-map-mask = <0x000fffff 0xffff>; - interrupt-map = -@@ -228,108 +218,15 @@ - <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - -- chipcommon: chipcommon@0 { -- reg = <0x00000000 0x1000>; -- -- gpio-controller; -- #gpio-cells = <2>; -+ chipcommon@0 { - interrupt-controller; - #interrupt-cells = <2>; - }; - -- pcie0: pcie@12000 { -- reg = <0x00012000 0x1000>; -- }; -- -- pcie1: pcie@13000 { -- reg = <0x00013000 0x1000>; -- }; -- - pcie2: pcie@14000 { - reg = <0x00014000 0x1000>; - }; - -- usb2: usb2@21000 { -- reg = <0x00021000 0x1000>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- ranges; -- -- interrupt-parent = <&gic>; -- -- ehci: usb@21000 { -- #usb-cells = <0>; -- -- compatible = "generic-ehci"; -- reg = <0x00021000 0x1000>; -- interrupts = ; -- phys = <&usb2_phy>; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- ehci_port1: port@1 { -- reg = <1>; -- #trigger-source-cells = <0>; -- }; -- -- ehci_port2: port@2 { -- reg = <2>; -- #trigger-source-cells = <0>; -- }; -- }; -- -- ohci: usb@22000 { -- #usb-cells = <0>; -- -- compatible = "generic-ohci"; -- reg = <0x00022000 0x1000>; -- interrupts = ; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- ohci_port1: port@1 { -- reg = <1>; -- #trigger-source-cells = <0>; -- }; -- -- ohci_port2: port@2 { -- reg = <2>; -- #trigger-source-cells = <0>; -- }; -- }; -- }; -- -- usb3: usb3@23000 { -- reg = <0x00023000 0x1000>; -- -- #address-cells = <1>; -- #size-cells = <1>; -- ranges; -- -- interrupt-parent = <&gic>; -- -- xhci: usb@23000 { -- #usb-cells = <0>; -- -- compatible = "generic-xhci"; -- reg = <0x00023000 0x1000>; -- interrupts = ; -- phys = <&usb3_phy>; -- phy-names = "usb"; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- xhci_port1: port@1 { -- reg = <1>; -- #trigger-source-cells = <0>; -- }; -- }; -- }; -- - gmac0: ethernet@24000 { - reg = <0x24000 0x800>; - }; -@@ -355,13 +252,6 @@ - status = "disabled"; - }; - -- mdio: mdio@18003000 { -- compatible = "brcm,iproc-mdio"; -- reg = <0x18003000 0x8>; -- #size-cells = <0>; -- #address-cells = <1>; -- }; -- - mdio-mux@18003000 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&mdio>; -@@ -409,18 +299,7 @@ - }; - - dmu-bus@1800c000 { -- compatible = "simple-bus"; -- ranges = <0 0x1800c000 0x1000>; -- #address-cells = <1>; -- #size-cells = <1>; -- - cru-bus@100 { -- compatible = "brcm,ns-cru", "simple-mfd"; -- reg = <0x100 0x1a4>; -- ranges; -- #address-cells = <1>; -- #size-cells = <1>; -- - lcpll0: clock-controller@100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; -@@ -440,53 +319,6 @@ - "usbclk", "iprocfast", - "sata1", "sata2"; - }; -- -- usb2_phy: phy@164 { -- compatible = "brcm,ns-usb2-phy"; -- reg = <0x164 0x4>; -- brcm,syscon-clkset = <&cru_clkset>; -- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; -- clock-names = "phy-ref-clk"; -- #phy-cells = <0>; -- }; -- -- cru_clkset: syscon@180 { -- compatible = "brcm,cru-clkset", "syscon"; -- reg = <0x180 0x4>; -- }; -- -- pinctrl: pinctrl@1c0 { -- compatible = "brcm,bcm4708-pinmux"; -- reg = <0x1c0 0x24>; -- reg-names = "cru_gpio_control"; -- -- spi-pins { -- groups = "spi_grp"; -- function = "spi"; -- }; -- -- pinmux_i2c: i2c-pins { -- groups = "i2c_grp"; -- function = "i2c"; -- }; -- -- pinmux_pwm: pwm-pins { -- groups = "pwm0_grp", "pwm1_grp", -- "pwm2_grp", "pwm3_grp"; -- function = "pwm"; -- }; -- -- pinmux_uart1: uart1-pins { -- groups = "uart1_grp"; -- function = "uart1"; -- }; -- }; -- -- thermal: thermal@2c0 { -- compatible = "brcm,ns-thermal"; -- reg = <0x2c0 0x10>; -- #thermal-sensor-cells = <0>; -- }; - }; - }; - -@@ -557,24 +389,4 @@ - }; - }; - }; -- -- thermal-zones { -- cpu_thermal: cpu-thermal { -- polling-delay-passive = <0>; -- polling-delay = <1000>; -- coefficients = <(-556) 418000>; -- thermal-sensors = <&thermal>; -- -- trips { -- cpu-crit { -- temperature = <125000>; -- hysteresis = <0>; -- type = "critical"; -- }; -- }; -- -- cooling-maps { -- }; -- }; -- }; - }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch deleted file mode 100644 index b98f2daa6764e7..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch +++ /dev/null @@ -1,136 +0,0 @@ -From 916553449561c4f0b61c71b751b7bb583f5dddd4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 3 May 2023 14:16:11 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+ - / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -All BCM5301X device DTS files use dual licensing. Try the same for SoC. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230503121611.1629-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 36 ++++++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 39 --------------------------------- - 2 files changed, 36 insertions(+), 39 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -19,6 +19,8 @@ - - gpio-controller; - #gpio-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; - }; - - pcie0: pcie@12000 { -@@ -109,6 +111,22 @@ - }; - }; - }; -+ -+ gmac0: ethernet@24000 { -+ reg = <0x24000 0x800>; -+ }; -+ -+ gmac1: ethernet@25000 { -+ reg = <0x25000 0x800>; -+ }; -+ -+ gmac2: ethernet@26000 { -+ reg = <0x26000 0x800>; -+ }; -+ -+ gmac3: ethernet@27000 { -+ reg = <0x27000 0x800>; -+ }; - }; - - mdio: mdio@18003000 { -@@ -118,6 +136,24 @@ - #address-cells = <1>; - }; - -+ rng: rng@18004000 { -+ compatible = "brcm,bcm5301x-rng"; -+ reg = <0x18004000 0x14>; -+ }; -+ -+ srab: ethernet-switch@18007000 { -+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; -+ reg = <0x18007000 0x1000>; -+ -+ status = "disabled"; -+ -+ /* ports are defined in board DTS */ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ - dmu-bus@1800c000 { - compatible = "simple-bus"; - ranges = <0 0x1800c000 0x1000>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -218,30 +218,9 @@ - <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - -- chipcommon@0 { -- interrupt-controller; -- #interrupt-cells = <2>; -- }; -- - pcie2: pcie@14000 { - reg = <0x00014000 0x1000>; - }; -- -- gmac0: ethernet@24000 { -- reg = <0x24000 0x800>; -- }; -- -- gmac1: ethernet@25000 { -- reg = <0x25000 0x800>; -- }; -- -- gmac2: ethernet@26000 { -- reg = <0x26000 0x800>; -- }; -- -- gmac3: ethernet@27000 { -- reg = <0x27000 0x800>; -- }; - }; - - pwm: pwm@18002000 { -@@ -322,24 +301,6 @@ - }; - }; - -- srab: ethernet-switch@18007000 { -- compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; -- reg = <0x18007000 0x1000>; -- -- status = "disabled"; -- -- /* ports are defined in board DTS */ -- ports { -- #address-cells = <1>; -- #size-cells = <0>; -- }; -- }; -- -- rng: rng@18004000 { -- compatible = "brcm,bcm5301x-rng"; -- reg = <0x18004000 0x14>; -- }; -- - nand_controller: nand-controller@18028000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; - reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch deleted file mode 100644 index 328748c8e0f739..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch +++ /dev/null @@ -1,249 +0,0 @@ -From b3b3cd885ed39cb4b38319a1c4fa4e41db6fee72 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 May 2023 17:19:20 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Hauke's code to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Hauke to the bcm-ns.dtsi which uses dual licensing. -That syncs more Northstar code to be based on the same licensing schema. - -Signed-off-by: Rafał Miłecki -Cc: Hauke Mehrtens -Acked-by: Hauke Mehrtens -Link: https://lore.kernel.org/r/20230515151921.25021-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 90 +++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 85 ------------------------------- - 2 files changed, 90 insertions(+), 85 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -1,4 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright 2013-2014 Hauke Mehrtens -+ */ - - #include - #include -@@ -7,6 +10,81 @@ - #include - - / { -+ interrupt-parent = <&gic>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ chipcommon-a-bus@18000000 { -+ compatible = "simple-bus"; -+ ranges = <0x00000000 0x18000000 0x00001000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ uart0: serial@300 { -+ compatible = "ns16550"; -+ reg = <0x0300 0x100>; -+ interrupts = ; -+ clocks = <&iprocslow>; -+ status = "disabled"; -+ }; -+ -+ uart1: serial@400 { -+ compatible = "ns16550"; -+ reg = <0x0400 0x100>; -+ interrupts = ; -+ clocks = <&iprocslow>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinmux_uart1>; -+ status = "disabled"; -+ }; -+ }; -+ -+ mpcore-bus@19000000 { -+ compatible = "simple-bus"; -+ ranges = <0x00000000 0x19000000 0x00023000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ scu@20000 { -+ compatible = "arm,cortex-a9-scu"; -+ reg = <0x20000 0x100>; -+ }; -+ -+ timer@20200 { -+ compatible = "arm,cortex-a9-global-timer"; -+ reg = <0x20200 0x100>; -+ interrupts = ; -+ clocks = <&periph_clk>; -+ }; -+ -+ timer@20600 { -+ compatible = "arm,cortex-a9-twd-timer"; -+ reg = <0x20600 0x20>; -+ interrupts = ; -+ clocks = <&periph_clk>; -+ }; -+ -+ gic: interrupt-controller@21000 { -+ compatible = "arm,cortex-a9-gic"; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ interrupt-controller; -+ reg = <0x21000 0x1000>, -+ <0x20100 0x100>; -+ }; -+ -+ L2: cache-controller@22000 { -+ compatible = "arm,pl310-cache"; -+ reg = <0x22000 0x1000>; -+ cache-unified; -+ arm,shared-override; -+ prefetch-data = <1>; -+ prefetch-instr = <1>; -+ cache-level = <2>; -+ }; -+ }; -+ - axi@18000000 { - compatible = "brcm,bus-axi"; - reg = <0x18000000 0x1000>; -@@ -216,6 +294,18 @@ - }; - }; - -+ nand_controller: nand-controller@18028000 { -+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; -+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; -+ reg-names = "nand", "iproc-idm", "iproc-ext"; -+ interrupts = ; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ brcm,nand-has-wp; -+ }; -+ - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -11,41 +11,7 @@ - #include "bcm-ns.dtsi" - - / { -- #address-cells = <1>; -- #size-cells = <1>; -- interrupt-parent = <&gic>; -- -- chipcommon-a-bus@18000000 { -- compatible = "simple-bus"; -- ranges = <0x00000000 0x18000000 0x00001000>; -- #address-cells = <1>; -- #size-cells = <1>; -- -- uart0: serial@300 { -- compatible = "ns16550"; -- reg = <0x0300 0x100>; -- interrupts = ; -- clocks = <&iprocslow>; -- status = "disabled"; -- }; -- -- uart1: serial@400 { -- compatible = "ns16550"; -- reg = <0x0400 0x100>; -- interrupts = ; -- clocks = <&iprocslow>; -- pinctrl-names = "default"; -- pinctrl-0 = <&pinmux_uart1>; -- status = "disabled"; -- }; -- }; -- - mpcore-bus@19000000 { -- compatible = "simple-bus"; -- ranges = <0x00000000 0x19000000 0x00023000>; -- #address-cells = <1>; -- #size-cells = <1>; -- - a9pll: arm_clk@0 { - #clock-cells = <0>; - compatible = "brcm,nsp-armpll"; -@@ -53,26 +19,6 @@ - reg = <0x00000 0x1000>; - }; - -- scu@20000 { -- compatible = "arm,cortex-a9-scu"; -- reg = <0x20000 0x100>; -- }; -- -- timer@20200 { -- compatible = "arm,cortex-a9-global-timer"; -- reg = <0x20200 0x100>; -- interrupts = ; -- clocks = <&periph_clk>; -- }; -- -- timer@20600 { -- compatible = "arm,cortex-a9-twd-timer"; -- reg = <0x20600 0x20>; -- interrupts = ; -- clocks = <&periph_clk>; -- }; -- - watchdog@20620 { - compatible = "arm,cortex-a9-twd-wdt"; - reg = <0x20620 0x20>; -@@ -80,25 +26,6 @@ - IRQ_TYPE_EDGE_RISING)>; - clocks = <&periph_clk>; - }; -- -- gic: interrupt-controller@21000 { -- compatible = "arm,cortex-a9-gic"; -- #interrupt-cells = <3>; -- #address-cells = <0>; -- interrupt-controller; -- reg = <0x21000 0x1000>, -- <0x20100 0x100>; -- }; -- -- L2: cache-controller@22000 { -- compatible = "arm,pl310-cache"; -- reg = <0x22000 0x1000>; -- cache-unified; -- arm,shared-override; -- prefetch-data = <1>; -- prefetch-instr = <1>; -- cache-level = <2>; -- }; - }; - - pmu { -@@ -301,18 +228,6 @@ - }; - }; - -- nand_controller: nand-controller@18028000 { -- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; -- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; -- reg-names = "nand", "iproc-idm", "iproc-ext"; -- interrupts = ; -- -- #address-cells = <1>; -- #size-cells = <0>; -- -- brcm,nand-has-wp; -- }; -- - spi@18029200 { - compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; - reg = <0x18029200 0x184>, diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch deleted file mode 100644 index ef29266d0b7ffb..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch +++ /dev/null @@ -1,203 +0,0 @@ -From 3b3e35b279bee5e51580c648399e20323467f58c Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 May 2023 17:19:21 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL - 2.0+ / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Those entries were added by: -1. Hauke in commits dec378827c4a ("ARM: BCM5301X: Add IRQs to Broadcom's - bus-axi in DTS file") and 1f80de6863ca ("ARM: BCM5301X: add IRQ - numbers for PCIe controller") -2. Florian in the commit 2cd0c0202f13 ("ARM: dts: BCM5301X: Add SRAB - interrupts") - -Move them to the bcm-ns.dtsi which uses dual licensing. That syncs more -Northstar code to be based on the same licensing schema. - -Signed-off-by: Rafał Miłecki -Cc: Hauke Mehrtens -Cc: Florian Fainelli -Acked-by: Hauke Mehrtens -Link: https://lore.kernel.org/r/20230515151921.25021-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 73 ++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 75 --------------------------------- - 2 files changed, 73 insertions(+), 75 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -92,6 +92,79 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0x000fffff 0xffff>; -+ interrupt-map = -+ /* ChipCommon */ -+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Switch Register Access Block */ -+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 0 */ -+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 1 */ -+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 2 */ -+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 2.0 Controller */ -+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 3.0 Controller */ -+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 0 */ -+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 1 */ -+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 2 */ -+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 3 */ -+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* NAND Controller */ -+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -+ - chipcommon: chipcommon@0 { - reg = <0x00000000 0x1000>; - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -3,8 +3,6 @@ - * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, - * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs - * -- * Copyright 2013-2014 Hauke Mehrtens -- * - * Licensed under the GNU/GPL. See COPYING for details. - */ - -@@ -72,79 +70,6 @@ - }; - - axi@18000000 { -- #interrupt-cells = <1>; -- interrupt-map-mask = <0x000fffff 0xffff>; -- interrupt-map = -- /* ChipCommon */ -- <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, -- -- /* Switch Register Access Block */ -- <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, -- <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, -- -- /* PCIe Controller 0 */ -- <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, -- <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, -- <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, -- <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, -- <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, -- <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, -- -- /* PCIe Controller 1 */ -- <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, -- <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, -- <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, -- <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, -- <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, -- <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, -- -- /* PCIe Controller 2 */ -- <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -- <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -- <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, -- <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, -- <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, -- <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, -- -- /* USB 2.0 Controller */ -- <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, -- -- /* USB 3.0 Controller */ -- <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, -- -- /* Ethernet Controller 0 */ -- <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, -- -- /* Ethernet Controller 1 */ -- <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, -- -- /* Ethernet Controller 2 */ -- <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, -- -- /* Ethernet Controller 3 */ -- <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, -- -- /* NAND Controller */ -- <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, -- <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -- - pcie2: pcie@14000 { - reg = <0x00014000 0x1000>; - }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch deleted file mode 100644 index 7d9b2971915090..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch +++ /dev/null @@ -1,336 +0,0 @@ -From dfa6570eb5ce2f24059caadbe2ed70034b5337bc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 May 2023 10:33:08 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify MAC addresses on Luxul devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Use NRAM (NVMEM device) and its "et0macaddr" variable (NVMEM cell) to -point Ethernet devices to their MAC addresses. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230515083308.7612-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 13 +++++++++++++ - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 13 +++++++++++++ - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 13 +++++++++++++ - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 11 +++++++++++ - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 11 +++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 13 +++++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 11 +++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 13 +++++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 11 +++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 ++++- - 10 files changed, 113 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -20,6 +20,14 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -53,6 +61,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -24,6 +24,14 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+ - nand_controller: nand-controller@18028000 { - nand@0 { - partitions { -@@ -60,6 +68,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -20,6 +20,14 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -53,6 +61,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -24,6 +24,10 @@ - nvram@1eff0000 { - compatible = "brcm,nvram"; - reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ #nvmem-cell-cells = <1>; -+ }; - }; - - leds { -@@ -106,6 +110,11 @@ - vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -137,6 +146,8 @@ - port@4 { - reg = <4>; - label = "wan"; -+ nvmem-cells = <&et0macaddr 5>; -+ nvmem-cell-names = "mac-address"; - }; - - port@5 { ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -25,6 +25,10 @@ - nvram@1eff0000 { - compatible = "brcm,nvram"; - reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ #nvmem-cell-cells = <1>; -+ }; - }; - - leds { -@@ -61,6 +65,11 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -76,6 +85,8 @@ - port@0 { - reg = <0>; - label = "wan"; -+ nvmem-cells = <&et0macaddr 1>; -+ nvmem-cell-names = "mac-address"; - }; - - port@1 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -20,6 +20,14 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -51,6 +59,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -25,6 +25,10 @@ - nvram@1eff0000 { - compatible = "brcm,nvram"; - reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ #nvmem-cell-cells = <1>; -+ }; - }; - - leds { -@@ -61,6 +65,11 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -76,6 +85,8 @@ - port@0 { - reg = <0>; - label = "wan"; -+ nvmem-cells = <&et0macaddr 1>; -+ nvmem-cell-names = "mac-address"; - }; - - port@1 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -22,6 +22,14 @@ - <0x88000000 0x18000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -47,6 +55,11 @@ - status = "okay"; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -25,6 +25,10 @@ - nvram@1eff0000 { - compatible = "brcm,nvram"; - reg = <0x1eff0000 0x10000>; -+ -+ et0macaddr: et0macaddr { -+ #nvmem-cell-cells = <1>; -+ }; - }; - - leds { -@@ -101,6 +105,11 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et0macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -136,6 +145,8 @@ - port@4 { - reg = <4>; - label = "wan"; -+ nvmem-cells = <&et0macaddr 5>; -+ nvmem-cell-names = "mac-address"; - }; - - port@5 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -27,6 +27,7 @@ - reg = <0x1eff0000 0x10000>; - - et0macaddr: et0macaddr { -+ #nvmem-cell-cells = <1>; - }; - }; - -@@ -76,7 +77,7 @@ - }; - - &gmac0 { -- nvmem-cells = <&et0macaddr>; -+ nvmem-cells = <&et0macaddr 0>; - nvmem-cell-names = "mac-address"; - }; - -@@ -119,6 +120,8 @@ - port@4 { - reg = <4>; - label = "wan"; -+ nvmem-cells = <&et0macaddr 5>; -+ nvmem-cell-names = "mac-address"; - }; - - port@5 { diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch deleted file mode 100644 index 5f5890e2915f3c..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 9d7121f1d2faa0b50bf5b462adcd2dd91970c45e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 20 May 2023 13:26:01 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Use updated device "compatible" strings -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Northstar binding was updated to use minus/hyphen char between model and -version for all devices. - -Signed-off-by: Rafał Miłecki -Reviewed-by: Linus Walleij -Link: https://lore.kernel.org/r/20230520112601.11821-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 2 +- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 2 +- - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 2 +- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 2 +- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 2 +- - 6 files changed, 6 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -8,7 +8,7 @@ - #include "bcm4708.dtsi" - - / { -- compatible = "luxul,xap-1510v1", "brcm,bcm4708"; -+ compatible = "luxul,xap-1510-v1", "brcm,bcm4708"; - model = "Luxul XAP-1510 V1"; - - chosen { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -13,7 +13,7 @@ - #include "bcm5301x-nand-cs0-bch8.dtsi" - - / { -- compatible = "netgear,r6250v1", "brcm,bcm4708"; -+ compatible = "netgear,r6250-v1", "brcm,bcm4708"; - model = "Netgear R6250 V1 (BCM4708)"; - - chosen { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -12,7 +12,7 @@ - #include "bcm5301x-nand-cs0-bch8.dtsi" - - / { -- compatible = "netgear,r6300v2", "brcm,bcm4708"; -+ compatible = "netgear,r6300-v2", "brcm,bcm4708"; - model = "Netgear R6300 V2 (BCM4708)"; - - chosen { ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -8,7 +8,7 @@ - #include "bcm47081.dtsi" - - / { -- compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708"; -+ compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708"; - model = "Luxul XAP-1410 V1"; - - chosen { ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -9,7 +9,7 @@ - #include "bcm5301x-nand-cs0-bch4.dtsi" - - / { -- compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; -+ compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708"; - model = "Luxul XWR-1200 V1"; - - chosen { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -9,7 +9,7 @@ - #include "bcm5301x-nand-cs0-bch4.dtsi" - - / { -- compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708"; -+ compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708"; - model = "Luxul XWR-3100 V1"; - - chosen { diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch deleted file mode 100644 index c16587f6840d02..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 04afb51c1dce90051487d3c7b70a1b1b246ce29a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 2 Jun 2023 17:10:23 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Switch away from deprecated properties. - -This fixes: -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-sck: False schema does not allow [[6, 7, 0]] - From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-mosi: False schema does not allow [[6, 4, 0]] - From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: 'sck-gpios' is a required property - From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: Unevaluated properties are not allowed ('gpio-mosi', 'gpio-sck' were unexpected) - From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230602151023.8607-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 4 ++-- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++-- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++-- - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++-- - 4 files changed, 8 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -@@ -16,8 +16,8 @@ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; -- gpio-sck = <&chipcommon 7 0>; -- gpio-mosi = <&chipcommon 4 0>; -+ sck-gpios = <&chipcommon 7 0>; -+ mosi-gpios = <&chipcommon 4 0>; - cs-gpios = <&chipcommon 6 0>; - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -28,8 +28,8 @@ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; -- gpio-sck = <&chipcommon 7 0>; -- gpio-mosi = <&chipcommon 4 0>; -+ sck-gpios = <&chipcommon 7 0>; -+ mosi-gpios = <&chipcommon 4 0>; - cs-gpios = <&chipcommon 6 0>; - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -28,8 +28,8 @@ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; -- gpio-sck = <&chipcommon 7 0>; -- gpio-mosi = <&chipcommon 4 0>; -+ sck-gpios = <&chipcommon 7 0>; -+ mosi-gpios = <&chipcommon 4 0>; - cs-gpios = <&chipcommon 6 0>; - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -28,8 +28,8 @@ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; -- gpio-sck = <&chipcommon 7 0>; -- gpio-mosi = <&chipcommon 4 0>; -+ sck-gpios = <&chipcommon 7 0>; -+ mosi-gpios = <&chipcommon 4 0>; - cs-gpios = <&chipcommon 6 0>; - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch deleted file mode 100644 index 59fa457aee6972..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch +++ /dev/null @@ -1,54 +0,0 @@ -From c3acdd4901192bc69dc577012663d5abae21661e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 2 Jun 2023 15:34:54 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid #usb-cells -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Such property simply doesn't exist (is not documented or used anywhere). - -This fixes: -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) - From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) - From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) - From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230602133455.7441-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 6 ------ - 1 file changed, 6 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -192,8 +192,6 @@ - interrupt-parent = <&gic>; - - ehci: usb@21000 { -- #usb-cells = <0>; -- - compatible = "generic-ehci"; - reg = <0x00021000 0x1000>; - interrupts = ; -@@ -214,8 +212,6 @@ - }; - - ohci: usb@22000 { -- #usb-cells = <0>; -- - compatible = "generic-ohci"; - reg = <0x00022000 0x1000>; - interrupts = ; -@@ -245,8 +241,6 @@ - interrupt-parent = <&gic>; - - xhci: usb@23000 { -- #usb-cells = <0>; -- - compatible = "generic-xhci"; - reg = <0x00023000 0x1000>; - interrupts = ; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch deleted file mode 100644 index b8411fc7196ea2..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 676bf7d062c14191c3fc12f1e36e1f3809041483 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 2 Jun 2023 15:34:55 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 - keys -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes: -arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' - From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230602133455.7441-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 -- - 1 file changed, 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -@@ -39,8 +39,6 @@ - - keys { - compatible = "gpio-keys"; -- #address-cells = <1>; -- #size-cells = <0>; - - key-restart { - label = "Reset"; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch deleted file mode 100644 index 7496321269f542..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 1d5682ccc7d6088179b6cfd50a3e3bb6d2b0527e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 5 Jun 2023 08:10:49 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Christian's code to the GPL - 2.0+ / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Christian to the bcm-ns.dtsi which uses dual -licensing. That syncs more Northstar code to be based on the same -licensing schema. - -Cc: Christian Lamparter -Signed-off-by: Rafał Miłecki -Acked-by: Christian Lamparter -Link: https://lore.kernel.org/r/20230605061049.16136-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 21 +++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 23 ----------------------- - 2 files changed, 21 insertions(+), 23 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -182,6 +182,10 @@ - reg = <0x00013000 0x1000>; - }; - -+ pcie2: pcie@14000 { -+ reg = <0x00014000 0x1000>; -+ }; -+ - usb2: usb2@21000 { - reg = <0x00021000 0x1000>; - -@@ -274,6 +278,14 @@ - }; - }; - -+ pwm: pwm@18002000 { -+ compatible = "brcm,iproc-pwm"; -+ reg = <0x18002000 0x28>; -+ clocks = <&osc>; -+ #pwm-cells = <3>; -+ status = "disabled"; -+ }; -+ - mdio: mdio@18003000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18003000 0x8>; -@@ -299,6 +311,15 @@ - }; - }; - -+ uart2: serial@18008000 { -+ compatible = "ns16550a"; -+ reg = <0x18008000 0x20>; -+ clocks = <&iprocslow>; -+ interrupts = ; -+ reg-shift = <2>; -+ status = "disabled"; -+ }; -+ - dmu-bus@1800c000 { - compatible = "simple-bus"; - ranges = <0 0x1800c000 0x1000>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -69,20 +69,6 @@ - }; - }; - -- axi@18000000 { -- pcie2: pcie@14000 { -- reg = <0x00014000 0x1000>; -- }; -- }; -- -- pwm: pwm@18002000 { -- compatible = "brcm,iproc-pwm"; -- reg = <0x18002000 0x28>; -- clocks = <&osc>; -- #pwm-cells = <3>; -- status = "disabled"; -- }; -- - mdio-mux@18003000 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&mdio>; -@@ -110,15 +96,6 @@ - reg = <0x18105000 0x1000>; - }; - -- uart2: serial@18008000 { -- compatible = "ns16550a"; -- reg = <0x18008000 0x20>; -- clocks = <&iprocslow>; -- interrupts = ; -- reg-shift = <2>; -- status = "disabled"; -- }; -- - i2c0: i2c@18009000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch deleted file mode 100644 index fa2f21af532504..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch +++ /dev/null @@ -1,838 +0,0 @@ -From ba4aebce23b2affb810b8a60eae853674d2cded2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 5 Jun 2023 15:21:09 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Describe switch ports in the main DTS -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -All Northstar SoCs have BCM5301x switches (BCM53011, BCM53012) with 8 -ports (0-8 without 6). By design 3 switch ports (5, 7 and 8) are -hardwired to 3 on-SoC Ethernet interfaces. Switch port 8 requires -forcing link state. - -It seems that global Northstar .dtsi file is the best place to describe -those hw details. Only device specific bits (like labels) should go to -device .dts files. - -This seems to fit well with a tiny exception of Asus RT-AC88U which -somehow was designed to have switch 5 connected to an extra switch. This -case was simply handled with a /delete-property/. - -Signed-off-by: Rafał Miłecki -Reviewed-by: Christian Lamparter (MR32+MR26) -Link: https://lore.kernel.org/r/20230605132109.7933-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 41 ++++++++++++++++++- - .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 7 ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 -- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 -- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 7 ---- - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 7 ---- - .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 7 ---- - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 -- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 ---- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 ------ - arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 17 +------- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 ------ - arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 12 ------ - .../boot/dts/bcm47094-linksys-panamera.dts | 34 ++++----------- - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 7 ---- - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 4 -- - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 7 ---- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 -- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 7 ---- - .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 ---- - arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 3 -- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 3 -- - 22 files changed, 51 insertions(+), 163 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -304,10 +304,49 @@ - - status = "disabled"; - -- /* ports are defined in board DTS */ - ports { - #address-cells = <1>; - #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ ethernet = <&gmac0>; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ ethernet = <&gmac1>; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ ethernet = <&gmac2>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -@@ -159,34 +159,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan1"; - }; - - port@1 { -- reg = <1>; - label = "lan2"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan4"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -75,19 +75,15 @@ - - ports { - port@0 { -- reg = <0>; - label = "poe"; - }; - - port@4 { -- reg = <4>; - label = "lan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -82,14 +82,11 @@ - - ports { - port@4 { -- reg = <4>; - label = "lan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -100,34 +100,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -123,34 +123,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -123,34 +123,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan1"; - }; - - port@1 { -- reg = <1>; - label = "lan2"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan4"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -75,14 +75,11 @@ - - ports { - port@4 { -- reg = <4>; - label = "poe"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -124,36 +124,29 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - nvmem-cells = <&et0macaddr 5>; - nvmem-cell-names = "mac-address"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -191,39 +191,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan1"; - }; - - port@1 { -- reg = <1>; - label = "lan2"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan4"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@8 { -- reg = <8>; - label = "cpu"; -- ethernet = <&gmac2>; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -@@ -181,32 +181,28 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - sw0_p5: port@5 { -- reg = <5>; -+ /delete-property/ethernet; -+ - label = "extsw"; - phy-mode = "rgmii"; - -@@ -218,8 +214,6 @@ - }; - - port@7 { -- reg = <7>; -- ethernet = <&gmac1>; - label = "cpu"; - - fixed-link { -@@ -229,14 +223,7 @@ - }; - - port@8 { -- reg = <8>; -- ethernet = <&gmac2>; - label = "cpu"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -124,39 +124,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@8 { -- reg = <8>; - label = "cpu"; -- ethernet = <&gmac2>; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -@@ -172,40 +172,28 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan1"; - }; - - port@1 { -- reg = <1>; - label = "lan2"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan4"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@8 { -- reg = <8>; - label = "cpu"; -- ethernet = <&gmac2>; - phy-mode = "rgmii"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -207,29 +207,32 @@ - dsa,member = <0 0>; - - ports { -+ sw0_p0: port@0 { -+ label = "extsw"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ - port@1 { -- reg = <1>; - label = "lan7"; - }; - - port@2 { -- reg = <2>; - label = "lan4"; - }; - - port@3 { -- reg = <3>; - label = "lan8"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - }; - - port@5 { -- reg = <5>; -- ethernet = <&gmac0>; - label = "cpu"; - status = "disabled"; - -@@ -240,8 +243,6 @@ - }; - - port@7 { -- reg = <7>; -- ethernet = <&gmac1>; - label = "cpu"; - status = "disabled"; - -@@ -252,24 +253,7 @@ - }; - - port@8 { -- reg = <8>; -- ethernet = <&gmac2>; - label = "cpu"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- -- sw0_p0: port@0 { -- reg = <0>; -- label = "extsw"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -83,36 +83,29 @@ - - ports { - port@0 { -- reg = <0>; - label = "wan"; - nvmem-cells = <&et0macaddr 1>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { -- reg = <1>; - label = "lan4"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan2"; - }; - - port@4 { -- reg = <4>; - label = "lan1"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -73,19 +73,15 @@ - - ports { - port@0 { -- reg = <0>; - label = "poe"; - }; - - port@1 { -- reg = <1>; - label = "lan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -83,36 +83,29 @@ - - ports { - port@0 { -- reg = <0>; - label = "wan"; - nvmem-cells = <&et0macaddr 1>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { -- reg = <1>; - label = "lan4"; - }; - - port@2 { -- reg = <2>; - label = "lan3"; - }; - - port@3 { -- reg = <3>; - label = "lan2"; - }; - - port@4 { -- reg = <4>; - label = "lan1"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -69,14 +69,11 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -123,36 +123,29 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - nvmem-cells = <&et0macaddr 5>; - nvmem-cell-names = "mac-address"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -98,36 +98,29 @@ - - ports { - port@0 { -- reg = <0>; - label = "lan4"; - }; - - port@1 { -- reg = <1>; - label = "lan3"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan1"; - }; - - port@4 { -- reg = <4>; - label = "wan"; - nvmem-cells = <&et0macaddr 5>; - nvmem-cell-names = "mac-address"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -@@ -115,14 +115,11 @@ - - ports { - port@0 { -- reg = <0>; - label = "poe"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - - fixed-link { - speed = <1000>; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -176,14 +176,11 @@ - - ports { - port@0 { -- reg = <0>; - label = "poe"; - }; - - port@5 { -- reg = <5>; - label = "cpu"; -- ethernet = <&gmac0>; - - fixed-link { - speed = <1000>; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch deleted file mode 100644 index ea571f459ab5a9..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch +++ /dev/null @@ -1,63 +0,0 @@ -From a6a1a156f5debaebf9f61850d111b966e9be9ee9 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 8 Jun 2023 17:36:27 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo - property -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -| bcm53015-meraki-mr26.dtb: nand-controller@18028000: -| nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] -| From schema: Documentation/[...]/nand-controller.yaml -| bcm53016-meraki-mr32.dtb: nand-controller@18028000: -| nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] -| From schema: Documentation/[...]/nand-controller.yaml - -original ECC values for these old Merakis are sadly not -provided by the vendor. It looks like Meraki just stuck -with what Broadcom's SDK was doing... which left this -up to the proprietary nand driver. - -Note: The invalid setting was and is handled by brcmnand. It -falls back to "bch" in brcmnand_setup_dev() when ecc.algo is -set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list -above). - -A correct nand-ecc-algo = "bch"; is already specified in the -included "bcm5301x-nand-cs0-bch8.dtsi". So this line can be -dropped. - -Reported-by: Rafał Miłecki (per Mail) -Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") -Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") -Signed-off-by: Christian Lamparter -Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 -- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 -- - 2 files changed, 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -@@ -72,8 +72,6 @@ - }; - - &nandcs { -- nand-ecc-algo = "hw"; -- - partitions { - compatible = "fixed-partitions"; - #address-cells = <0x1>; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -125,8 +125,6 @@ - }; - - &nandcs { -- nand-ecc-algo = "hw"; -- - partitions { - /* - * The partition autodetection does not work for this device. diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch deleted file mode 100644 index 8eb5442d1714f9..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch +++ /dev/null @@ -1,54 +0,0 @@ -From d68b2f7d7d06872450d4f39d84d5926d7e7ae88c Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 8 Jun 2023 17:36:28 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: MR32: remove partition index numbers - -removes the partition indexes in the node names under. -This brings the device tree source in line with others. - -Signed-off-by: Christian Lamparter -Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -138,31 +138,31 @@ - #address-cells = <0x1>; - #size-cells = <0x1>; - -- partition0@0 { -+ partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - read-only; - }; - -- partition1@100000 { -+ partition@100000 { - label = "bootkernel1"; - reg = <0x100000 0x300000>; - read-only; - }; - -- partition2@400000 { -+ partition@400000 { - label = "nvram"; - reg = <0x400000 0x100000>; - read-only; - }; - -- partition3@500000 { -+ partition@500000 { - label = "bootkernel2"; - reg = <0x500000 0x300000>; - read-only; - }; - -- partition4@800000 { -+ partition@800000 { - label = "ubi"; - reg = <0x800000 0x7780000>; - }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch deleted file mode 100644 index 3ffe0b2f170e53..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 752a63b8dbe6cc6900efd1035bea427a778a4b55 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 2 Jun 2023 15:59:25 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This allows setting FullMAC firmware regulatory domain. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230602135925.14143-3-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -137,8 +137,10 @@ - #size-cells = <2>; - - wifi@0,1,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <5735000 5835000>; -+ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; - }; - }; - }; -@@ -159,6 +161,19 @@ - #address-cells = <3>; - #size-cells = <2>; - -+ bridge@1,0 { -+ reg = <0x800 0 0 0 0>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; -+ reg = <0x0000 0 0 0 0>; -+ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; -+ }; -+ }; -+ - bridge@1,2,2 { - reg = <0x1000 0 0 0 0>; - -@@ -166,8 +181,10 @@ - #size-cells = <2>; - - wifi@1,4,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <5170000 5730000>; -+ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch deleted file mode 100644 index 454ce4c278f5b6..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch +++ /dev/null @@ -1,59 +0,0 @@ -From b67cad33176e472df6d16a24ee7624299bdcd5d5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 16 Jun 2023 12:58:27 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Add cells sizes to PCIe nodes -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes: -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property - From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml - -Two properties that need to be added later are "device_type" and -"ranges". Adding "device_type" on its own causes a new warning and the -value of "ranges" needs to be determined yet. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm-ns.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -176,14 +176,23 @@ - - pcie0: pcie@12000 { - reg = <0x00012000 0x1000>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; - }; - - pcie1: pcie@13000 { - reg = <0x00013000 0x1000>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; - }; - - pcie2: pcie@14000 { - reg = <0x00014000 0x1000>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; - }; - - usb2: usb2@21000 { diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch deleted file mode 100644 index 9811757ee2a465..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 4b8e16de053fc88eac406ad63da2693dd8279043 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 5 Jul 2023 17:01:07 +0200 -Subject: [PATCH] ARM: dts: broadcom: add missing space before { - -Add missing whitespace between node name/label and opening {. - -Signed-off-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20230705150108.293999-1-krzysztof.kozlowski@linaro.org -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts | 2 +- - arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -279,7 +279,7 @@ - reg = <0x080000 0x0100000>; - }; - -- partition@180000{ -+ partition@180000 { - label = "devinfo"; - reg = <0x0180000 0x080000>; - }; ---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -55,7 +55,7 @@ - reg = <0x0080000 0x0100000>; - }; - -- partition@180000{ -+ partition@180000 { - label = "phicomm"; - reg = <0x0180000 0x0280000>; - read-only; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch deleted file mode 100644 index e5143abf58ef84..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 8960f095de3b80beb3639075f0c8161b6ea98c61 Mon Sep 17 00:00:00 2001 -From: Dan Haab -Date: Wed, 5 Jul 2023 09:32:51 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul - devices - -This allows setting FullMAC firmware regulatory domain. - -Signed-off-by: Dan Haab -Link: https://lore.kernel.org/r/20230705153251.739236-1-riproute@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm47094-luxul-xap-1610.dts | 37 +++++++++++++++++++ - .../broadcom/bcm47094-luxul-xwr-3150-v1.dts | 36 ++++++++++++++++++ - 2 files changed, 73 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -64,6 +64,43 @@ - nvmem-cell-names = "mac-address"; - }; - -+ -+&pcie0 { -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bridge@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; -+ reg = <0x0000 0 0 0 0>; -+ brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; -+ }; -+ }; -+}; -+ -+&pcie1 { -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bridge@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; -+ reg = <0x0000 0 0 0 0>; -+ brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; -+ }; -+ }; -+}; -+ - &spi_nor { - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -81,6 +81,42 @@ - nvmem-cell-names = "mac-address"; - }; - -+&pcie0 { -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bridge@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; -+ reg = <0x0000 0 0 0 0>; -+ brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930"; -+ }; -+ }; -+}; -+ -+&pcie1 { -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bridge@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,0 { -+ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; -+ reg = <0x0000 0 0 0 0>; -+ brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930"; -+ }; -+ }; -+}; -+ - &usb3 { - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch deleted file mode 100644 index 4b2e608ec2ecf1..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 2ce61fa62183cf994666fcc911da34075c7183b5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 7 Jul 2023 11:15:19 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet interfaces links -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Northstar SoCs have 3 usable Ethernet interfaces each connected to one -of switch ports. They all use fixed links. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230707091519.21673-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -272,14 +272,32 @@ - - gmac0: ethernet@24000 { - reg = <0x24000 0x800>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - gmac1: ethernet@25000 { - reg = <0x25000 0x800>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - gmac2: ethernet@26000 { - reg = <0x26000 0x800>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - gmac3: ethernet@27000 { diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch deleted file mode 100644 index 8bad76edcaaf8d..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch +++ /dev/null @@ -1,57 +0,0 @@ -From be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 7 Jul 2023 13:40:01 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Drop nonexistent "default-off" LED - trigger -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There is no such trigger documented or implemented in Linux. It was a -copy & paste mistake. - -This fixes: -arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: - 'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport'] - 'default-off' does not match '^cpu[0-9]*$' - 'default-off' does not match '^hci[0-9]+-power$' - 'default-off' does not match '^mmc[0-9]+$' - 'default-off' does not match '^phy[0-9]+tx$' - From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 - - arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 -- - 2 files changed, 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -26,7 +26,6 @@ - led-wlan { - label = "bcm53xx:blue:wlan"; - gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "default-off"; - }; - - led-system { ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -26,7 +26,6 @@ - led-5ghz { - label = "bcm53xx:blue:5ghz"; - gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; -- linux,default-trigger = "default-off"; - }; - - led-system { -@@ -42,7 +41,6 @@ - led-2ghz { - label = "bcm53xx:blue:2ghz"; - gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; -- linux,default-trigger = "default-off"; - }; - }; - diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch deleted file mode 100644 index 7930c52b162ab1..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 13 Jul 2023 13:11:45 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that -use a non-default design. They don't include switch but have a single -Ethernet port and BCM54210E PHY connected to the Ethernet controller's -MDIO bus. - -Support for those devices regressed due to two changes: - -1. Describing MDIO bus with switch -After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 -rev 4 switch") Linux stopped probing for MDIO devices. - -2. Dropping hardcoded BCM54210E delays -In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays -configuration for BCM54210E") support for other PHY modes was added but -that requires a proper "phy-mode" value in DT. - -Both above changes are correct (they don't need to be reverted or -anything) but they need this fix for DT data to be correct and for Linux -to work properly. - -Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++ - .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++ - 2 files changed, 26 insertions(+) - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -58,3 +58,16 @@ - }; - }; - }; -+ -+&gmac0 { -+ phy-mode = "rgmii"; -+ phy-handle = <&bcm54210e>; -+ -+ mdio { -+ /delete-node/ switch@1e; -+ -+ bcm54210e: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -94,3 +94,16 @@ - }; - }; - }; -+ -+&gmac0 { -+ phy-mode = "rgmii"; -+ phy-handle = <&bcm54210e>; -+ -+ mdio { -+ /delete-node/ switch@1e; -+ -+ bcm54210e: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch deleted file mode 100644 index f23873e1112da8..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 72ec77d74d28be7359ef77971cdee38b60af9e49 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Thu, 13 Jul 2023 00:16:42 +0200 -Subject: [PATCH] ARM: dts: bcm5301x: Add SEAMA compatibles - -This adds SEAMA compatibles to the firmware partition of these -two D-Link devices. - -Signed-off-by: Linus Walleij -Link: https://lore.kernel.org/r/20230713-seama-partitions-v4-2-69e577453d40@linaro.org -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 + - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 + - 2 files changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -33,6 +33,7 @@ - #size-cells = <1>; - - partition@0 { -+ compatible = "seama"; - label = "firmware"; - reg = <0x00000000 0x08000000>; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -@@ -149,6 +149,7 @@ - * partitions: this device uses SEAMA. - */ - firmware@0 { -+ compatible = "seama"; - label = "firmware"; - reg = <0x00000000 0x08000000>; - }; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch deleted file mode 100644 index ab27495078aaef..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 8d6b61ecad2f1c939813c5c4517d53e04672dc48 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 23 Jul 2023 21:54:15 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Describe BCM53125 switch ports in the - main DTS -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP -ports. It seems the best place to describe that in the main .dtsi. -Device specific bits can go to device .dts files. This will help -avoiding some code duplication. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230723195416.7831-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../boot/dts/broadcom/bcm47189-tenda-ac9.dts | 7 ----- - arch/arm/boot/dts/broadcom/bcm53573.dtsi | 26 ++++++++++++++++++- - 2 files changed, 25 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -@@ -111,34 +111,27 @@ - - ports { - port@0 { -- reg = <0>; - label = "wan"; - }; - - port@1 { -- reg = <1>; - label = "lan1"; - }; - - port@2 { -- reg = <2>; - label = "lan2"; - }; - - port@3 { -- reg = <3>; - label = "lan3"; - }; - - port@4 { -- reg = <4>; - label = "lan4"; - }; - - port@8 { -- reg = <8>; - label = "cpu"; -- ethernet = <&gmac0>; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -192,10 +192,34 @@ - - status = "disabled"; - -- /* ports are defined in board DTS */ - ports { - #address-cells = <1>; - #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ ethernet = <&gmac0>; -+ }; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch deleted file mode 100644 index cc9e86ac751fb3..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch +++ /dev/null @@ -1,36 +0,0 @@ -From d95b1caeea194962220db1778ce7fe71cdba788b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 23 Jul 2023 21:54:16 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Add BCM53125 switch port 5 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's connected to the extra Ethernet interface. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230723195416.7831-3-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm53573.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -216,6 +216,16 @@ - reg = <4>; - }; - -+ port@5 { -+ reg = <5>; -+ ethernet = <&gmac1>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ - port@8 { - reg = <8>; - ethernet = <&gmac0>; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch deleted file mode 100644 index f97d4edd754483..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch +++ /dev/null @@ -1,73 +0,0 @@ -From e0ae343a2c1b782a346d9b844ea65e1d49c428b2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 24 Jul 2023 12:12:27 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Add Ethernet interfaces links -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM53573 has 2 Ethernet interfaces each connected to one of switch ports -in the default design. They both use fixed links. - -An exception are Luxul XAP devices that have switch replaced by a single -PHY. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230724101227.5420-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++ - .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++ - arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++ - 3 files changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -50,6 +50,8 @@ - phy-mode = "rgmii"; - phy-handle = <&bcm54210e>; - -+ /delete-node/ fixed-link; -+ - mdio { - /delete-node/ switch@1e; - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -86,6 +86,8 @@ - phy-mode = "rgmii"; - phy-handle = <&bcm54210e>; - -+ /delete-node/ fixed-link; -+ - mdio { - /delete-node/ switch@1e; - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -181,6 +181,12 @@ - - gmac0: ethernet@5000 { - reg = <0x5000 0x1000>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - - mdio { - #address-cells = <1>; -@@ -237,6 +243,12 @@ - - gmac1: ethernet@b000 { - reg = <0xb000 0x1000>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - pmu@12000 { diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch deleted file mode 100644 index e9e347075d7a76..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch +++ /dev/null @@ -1,39 +0,0 @@ -From d8835601e3c306fda78f8736f1aef688e99e892d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 24 Jul 2023 12:11:59 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Disable second Ethernet on Luxul devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -XAP-810 and XAP-1440 both have a single Ethernet port and BCM54210E PHY. -Their second Ethernet interface is not connected to anything. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230724101159.5289-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 4 ++++ - arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 4 ++++ - 2 files changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -73,3 +73,7 @@ - }; - }; - }; -+ -+&gmac1 { -+ status = "disabled"; -+}; ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -109,3 +109,7 @@ - }; - }; - }; -+ -+&gmac1 { -+ status = "disabled"; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch b/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch deleted file mode 100644 index 47d5b108394c37..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch +++ /dev/null @@ -1,431 +0,0 @@ -From 2900083269f7c0f0ff430bffc6ced2038aed9b6b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Thu, 3 Aug 2023 10:14:54 +0300 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -ASUS RT-AC3100 is ASUS RT-AC88U without the external switch. Move the -shared bindings to bcm47094-asus-rt-ac3100.dtsi. - -Remove the fixed-link node on port@7 as commit ba4aebce23b2 ("ARM: dts: -BCM5301X: Describe switch ports in the main DTS") states it's not -necessary. - -Replace the copyright notice with an author notice. - -Rename the model name from Asus to ASUS on bcm47094-asus-rt-ac88u.dts. - -Signed-off-by: Arınç ÜNAL -Reviewed-by: Linus Walleij -Link: https://lore.kernel.org/r/20230803071454.5902-2-arinc.unal@arinc9.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/Makefile | 1 + - .../dts/bcm47094-asus-rt-ac3100.dts | 23 +++ - .../dts/bcm47094-asus-rt-ac3100.dtsi | 163 ++++++++++++++++++ - .../dts/bcm47094-asus-rt-ac88u.dts | 155 +---------------- - 4 files changed, 190 insertions(+), 152 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts - create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-netgear-r7000.dtb \ - bcm4709-netgear-r8000.dtb \ - bcm4709-tplink-archer-c9-v1.dtb \ -+ bcm47094-asus-rt-ac3100.dtb \ - bcm47094-asus-rt-ac88u.dtb \ - bcm47094-dlink-dir-885l.dtb \ - bcm47094-dlink-dir-890l.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts -@@ -0,0 +1,23 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Author: Arınç ÜNAL -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094-asus-rt-ac3100.dtsi" -+ -+/ { -+ compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "ASUS RT-AC3100"; -+ -+ nvram@1c080000 { -+ et0macaddr: et0macaddr { -+ }; -+ }; -+}; -+ -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi -@@ -0,0 +1,163 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Author: Arınç ÜNAL -+ */ -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; -+ }; -+ -+ nvram@1c080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1c080000 0x00180000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led-power { -+ label = "white:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ led-wan-red { -+ label = "red:wan"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-lan { -+ label = "white:lan"; -+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-usb2 { -+ label = "white:usb2"; -+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ehci_port2>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ led-usb3 { -+ label = "white:usb3"; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ehci_port1>, <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ led-wps { -+ label = "white:wps"; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ -+ button-wps { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button-reset { -+ label = "Reset"; -+ linux,code = ; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button-wifi { -+ label = "Wi-Fi"; -+ linux,code = ; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button-led { -+ label = "Backlight"; -+ linux,code = ; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&srab { -+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan1"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ label = "cpu"; -+ }; -+ -+ port@8 { -+ label = "cpu"; -+ }; -+ }; -+}; -+ -+&usb2 { -+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; -+}; -+ -+&usb3_phy { -+ status = "okay"; -+}; -+ -+&nandcs { -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "boot"; -+ reg = <0x00000000 0x00080000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "nvram"; -+ reg = <0x00080000 0x00180000>; -+ }; -+ -+ partition@200000 { -+ label = "firmware"; -+ reg = <0x00200000 0x07e00000>; -+ compatible = "brcm,trx"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts -@@ -1,102 +1,21 @@ - // SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* -- * Copyright (C) 2021-2022 Arınç ÜNAL -+ * Author: Arınç ÜNAL - */ - - /dts-v1/; - --#include "bcm47094.dtsi" --#include "bcm5301x-nand-cs0-bch8.dtsi" -+#include "bcm47094-asus-rt-ac3100.dtsi" - - / { - compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; -- model = "Asus RT-AC88U"; -- -- chosen { -- bootargs = "earlycon"; -- }; -- -- memory@0 { -- device_type = "memory"; -- reg = <0x00000000 0x08000000>, -- <0x88000000 0x18000000>; -- }; -+ model = "ASUS RT-AC88U"; - - nvram@1c080000 { -- compatible = "brcm,nvram"; -- reg = <0x1c080000 0x00180000>; -- - et1macaddr: et1macaddr { - }; - }; - -- leds { -- compatible = "gpio-leds"; -- -- led-power { -- label = "white:power"; -- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "default-on"; -- }; -- -- led-wan-red { -- label = "red:wan"; -- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -- }; -- -- led-lan { -- label = "white:lan"; -- gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; -- }; -- -- led-usb2 { -- label = "white:usb2"; -- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; -- trigger-sources = <&ehci_port2>; -- linux,default-trigger = "usbport"; -- }; -- -- led-usb3 { -- label = "white:usb3"; -- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -- trigger-sources = <&ehci_port1>, <&xhci_port1>; -- linux,default-trigger = "usbport"; -- }; -- -- led-wps { -- label = "white:wps"; -- gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; -- }; -- }; -- -- gpio-keys { -- compatible = "gpio-keys"; -- -- button-wps { -- label = "WPS"; -- linux,code = ; -- gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; -- }; -- -- button-reset { -- label = "Reset"; -- linux,code = ; -- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -- }; -- -- button-wifi { -- label = "Wi-Fi"; -- linux,code = ; -- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -- }; -- -- button-led { -- label = "Backlight"; -- linux,code = ; -- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -- }; -- }; -- - switch { - compatible = "realtek,rtl8365mb"; - /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ -@@ -175,31 +94,9 @@ - }; - - &srab { -- compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -- status = "okay"; - dsa,member = <0 0>; - - ports { -- port@0 { -- label = "lan4"; -- }; -- -- port@1 { -- label = "lan3"; -- }; -- -- port@2 { -- label = "lan2"; -- }; -- -- port@3 { -- label = "lan1"; -- }; -- -- port@4 { -- label = "wan"; -- }; -- - sw0_p5: port@5 { - /delete-property/ethernet; - -@@ -212,19 +109,6 @@ - pause; - }; - }; -- -- port@7 { -- label = "cpu"; -- -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- -- port@8 { -- label = "cpu"; -- }; - }; - }; - -@@ -236,36 +120,3 @@ - nvmem-cells = <&et1macaddr>; - nvmem-cell-names = "mac-address"; - }; -- --&usb2 { -- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; --}; -- --&usb3_phy { -- status = "okay"; --}; -- --&nandcs { -- partitions { -- compatible = "fixed-partitions"; -- #address-cells = <1>; -- #size-cells = <1>; -- -- partition@0 { -- label = "boot"; -- reg = <0x00000000 0x00080000>; -- read-only; -- }; -- -- partition@80000 { -- label = "nvram"; -- reg = <0x00080000 0x00180000>; -- }; -- -- partition@200000 { -- label = "firmware"; -- reg = <0x00200000 0x07e00000>; -- compatible = "brcm,trx"; -- }; -- }; --}; diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch deleted file mode 100644 index 78b8975f1fd89d..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 1 Sep 2023 12:55:49 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Specify NVRAM access and use its "et2macaddr" NVMEM cell. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230901105549.7076-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -25,6 +25,15 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1e3f0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1e3f0000 0x10000>; -+ -+ et2macaddr: et2macaddr { -+ #nvmem-cell-cells = <1>; -+ }; -+ }; -+ - nand_controller: nand-controller@18028000 { - nand@0 { - partitions { -@@ -112,6 +121,11 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et2macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -142,6 +156,8 @@ - - port@4 { - label = "wan"; -+ nvmem-cells = <&et2macaddr 3>; -+ nvmem-cell-names = "mac-address"; - }; - - port@8 { diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch deleted file mode 100644 index 11ce7acb5361b5..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch +++ /dev/null @@ -1,44 +0,0 @@ -From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 1 Sep 2023 14:43:11 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Specify NVRAM access and use its "et1macaddr" NVMEM cell. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -25,6 +25,12 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1c080000 { -+ et1macaddr: et1macaddr { -+ #nvmem-cell-cells = <1>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -62,6 +68,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et1macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &usb3_phy { - status = "okay"; - }; diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch deleted file mode 100644 index 6df1e555e99c05..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 16 Sep 2023 10:30:57 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Felix to the bcm-ns.dtsi which uses dual licensing. -That syncs more Northstar code to be based on the same licensing schema. - -This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add -profiling support"). - -Cc: Felix Fietkau -Signed-off-by: Rafał Miłecki -Acked-by: Felix Fietkau -Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++ - arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 ------- - 2 files changed, 7 insertions(+), 7 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -14,6 +14,13 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ pmu { -+ compatible = "arm,cortex-a9-pmu"; -+ interrupts = -+ , -+ ; -+ }; -+ - chipcommon-a-bus@18000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x00001000>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -26,13 +26,6 @@ - }; - }; - -- pmu { -- compatible = "arm,cortex-a9-pmu"; -- interrupts = -- , -- ; -- }; -- - clocks { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch deleted file mode 100644 index 66db4a291fb924..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch +++ /dev/null @@ -1,104 +0,0 @@ -From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 16 Sep 2023 10:58:55 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing. -That syncs more Northstar code to be based on the same licensing schema. - -This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X: -Make USB 3.0 PHY use MDIO PHY driver"). - -Cc: Vivek Unune -Signed-off-by: Rafał Miłecki -Acked-by: Vivek Unune -Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++ - arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------ - 2 files changed, 27 insertions(+), 27 deletions(-) - ---- a/arch/arm/boot/dts/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/bcm-ns.dtsi -@@ -327,6 +327,29 @@ - #address-cells = <1>; - }; - -+ mdio-mux@18003000 { -+ compatible = "mdio-mux-mmioreg", "mdio-mux"; -+ mdio-parent-bus = <&mdio>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x18003000 0x4>; -+ mux-mask = <0x200>; -+ -+ mdio@0 { -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ usb3_phy: usb3-phy@10 { -+ compatible = "brcm,ns-ax-usb3-phy"; -+ reg = <0x10>; -+ usb3-dmp-syscon = <&usb3_dmp>; -+ #phy-cells = <0>; -+ status = "disabled"; -+ }; -+ }; -+ }; -+ - rng: rng@18004000 { - compatible = "brcm,bcm5301x-rng"; - reg = <0x18004000 0x14>; -@@ -467,6 +490,10 @@ - brcm,nand-has-wp; - }; - -+ usb3_dmp: syscon@18105000 { -+ reg = <0x18105000 0x1000>; -+ }; -+ - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -62,33 +62,6 @@ - }; - }; - -- mdio-mux@18003000 { -- compatible = "mdio-mux-mmioreg", "mdio-mux"; -- mdio-parent-bus = <&mdio>; -- #address-cells = <1>; -- #size-cells = <0>; -- reg = <0x18003000 0x4>; -- mux-mask = <0x200>; -- -- mdio@0 { -- reg = <0x0>; -- #address-cells = <1>; -- #size-cells = <0>; -- -- usb3_phy: usb3-phy@10 { -- compatible = "brcm,ns-ax-usb3-phy"; -- reg = <0x10>; -- usb3-dmp-syscon = <&usb3_dmp>; -- #phy-cells = <0>; -- status = "disabled"; -- }; -- }; -- }; -- -- usb3_dmp: syscon@18105000 { -- reg = <0x18105000 0x1000>; -- }; -- - i2c0: i2c@18009000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch deleted file mode 100644 index 72e5c6b061412e..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch +++ /dev/null @@ -1,377 +0,0 @@ -From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 13 Oct 2023 12:33:13 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU - ports -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When redescribing ports I assumed that missing "label" (like "cpu") -means switch port isn't used. That was incorrect and I realized my -change made Linux always use the first (5) CPU port (there are 3 of -them). - -While above should technically be possible it often isn't correct: -1. Non-default switch ports are often connected to Ethernet interfaces - not fully covered by vendor setup (they may miss MACs) -2. On some devices non-default ports require specifying fixed link - -This fixes network connectivity for some devices. It was reported & -tested for Netgear R8000. It also affects Linksys EA9200 with its -downstream DTS. - -Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS") -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++ - .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++ - 20 files changed, 160 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi -@@ -181,5 +181,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -85,5 +85,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -88,5 +88,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -122,5 +122,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -145,6 +145,14 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -145,5 +145,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -81,5 +81,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -148,5 +148,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -227,6 +227,14 @@ - label = "wan"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -160,6 +160,14 @@ - nvmem-cell-names = "mac-address"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - }; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts -@@ -192,6 +192,14 @@ - label = "wan"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - phy-mode = "rgmii"; ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -107,5 +107,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -120,5 +120,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -107,5 +107,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -75,5 +75,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -147,5 +147,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -158,5 +158,13 @@ - port@5 { - label = "cpu"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -@@ -124,6 +124,14 @@ - full-duplex; - }; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -185,6 +185,14 @@ - full-duplex; - }; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/bcm953012er.dts -+++ b/arch/arm/boot/dts/bcm953012er.dts -@@ -84,6 +84,14 @@ - label = "cpu"; - ethernet = <&gmac0>; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch deleted file mode 100644 index 0b2b7b36a3fc29..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 13 Oct 2023 12:33:14 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 - CPU ports -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Ports 5 and 7 are disabled by default because the standard use case is -for port 8 to manage all CPU directed traffic. For experimentation -purposes however it is desirable to provide adequate properties such -that people can experiment with using different ports without having to -figure out their configuration. Some of the use cases include but are -not limited to doubling or tripling the bandwidth by leveraging the -additional ports/Ethernet MAC combinations. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -229,10 +229,20 @@ - - port@5 { - status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - port@7 { - status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - port@8 { diff --git a/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch deleted file mode 100644 index 4528c95a5aa960..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 24 Oct 2023 09:26:05 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch was developed as OpenWrt downstream change and was recently -confirmed to work as expected. - -Tested-by: Rani Hod -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231024072605.32517-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm4709-linksys-ea9200.dts | 38 +++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -47,3 +47,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ label = "cpu"; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch b/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch deleted file mode 100644 index 5ebc78ca2023b4..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch +++ /dev/null @@ -1,28 +0,0 @@ -From b9457a04eb89645049fdf427c13e6a18d5501895 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Tue, 11 Oct 2022 14:24:40 +0200 -Subject: [PATCH] bcma: support SPROM rev 11 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Rev 11 works fine for me to set the MAC address of gmac0 and -gmac1 in the D-Link DWL-8610AP. - -Cc: Rafał Miłecki -Signed-off-by: Linus Walleij ---- - drivers/bcma/sprom.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -170,7 +170,7 @@ static int bcma_sprom_valid(struct bcma_ - return err; - - revision = sprom[words - 1] & SSB_SPROM_REVISION_REV; -- if (revision != 8 && revision != 9 && revision != 10) { -+ if (revision < 8 || revision > 11) { - pr_err("Unsupported SPROM revision: %d\n", revision); - return -ENOENT; - } diff --git a/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch deleted file mode 100644 index e1933e75c78a20..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 13 Apr 2021 18:25:20 +0200 -Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Parsing every partition with "compatible" set to "brcm,trx" results in -parsing both: firmware partition and failsafe partition on devices that -implement failsafe booting. This affects e.g. Linksys EA9500 which has: - -partition@200000 { - reg = <0x0200000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -partition@1f00000 { - reg = <0x01f00000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -Check for MTD partition name "firmware" before parsing. Recently added -ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on -bootloader setup. - -Signed-off-by: Rafał Miłecki ---- - drivers/mtd/parsers/parser_trx.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mtd/parsers/parser_trx.c -+++ b/drivers/mtd/parsers/parser_trx.c -@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i - if (err != 0 && err != -EINVAL) - pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err); - -+ /* Don't parse any failsafe / backup partitions */ -+ if (strcmp(mtd->name, "firmware")) -+ return -EINVAL; -+ - parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), - GFP_KERNEL); - if (!parts) diff --git a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch deleted file mode 100644 index ac5a48283da65f..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ /dev/null @@ -1,118 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 1 Oct 2016 22:54:48 +0200 -Subject: [PATCH] usb: xhci: add support for performing fake doorbell - -Broadcom's Northstar XHCI controllers seem to need a special start -procedure to work correctly. There isn't any official documentation of -this, the problem is that controller doesn't detect any connected -devices with default setup. Moreover connecting USB device to controller -that doesn't run properly can cause SoC's watchdog issues. - -A workaround that was successfully tested on multiple devices is to -perform a fake doorbell. This patch adds code for doing this and enables -it on BCM4708 family. ---- - drivers/usb/host/xhci-plat.c | 6 +++++ - drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++--- - drivers/usb/host/xhci.h | 1 + - 3 files changed, 67 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct - static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) - { - struct xhci_plat_priv *priv = xhci_to_priv(xhci); -+ struct platform_device*pdev = to_platform_device(dev); -+ struct device_node *node = pdev->dev.of_node; - - /* - * As of now platform drivers don't provide MSI support so we ensure -@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi - * dev struct in order to setup MSI - */ - xhci->quirks |= XHCI_PLAT | priv->quirks; -+ -+ if (node && of_machine_is_compatible("brcm,bcm4708")) -+ xhci->quirks |= XHCI_FAKE_DOORBELL; - } - - /* called during probe() after chip reset completes */ ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -161,6 +161,49 @@ int xhci_start(struct xhci_hcd *xhci) - return ret; - } - -+/** -+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot -+ * -+ * Some controllers require a fake doorbell to start correctly. Without that -+ * they simply don't detect any devices. -+ */ -+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) -+{ -+ u32 temp; -+ -+ /* Alloc a virt device for that slot */ -+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) { -+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); -+ return -ENOMEM; -+ } -+ -+ /* Ring fake doorbell for slot_id ep 0 */ -+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); -+ usleep_range(1000, 1500); -+ -+ /* Read the status to check if HSE is set or not */ -+ temp = readl(&xhci->op_regs->status); -+ -+ /* Clear HSE if set */ -+ if (temp & STS_FATAL) { -+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp); -+ temp &= ~0x1fff; -+ temp |= STS_FATAL; -+ writel(temp, &xhci->op_regs->status); -+ usleep_range(1000, 1500); -+ readl(&xhci->op_regs->status); -+ } -+ -+ /* Free virt device */ -+ xhci_free_virt_device(xhci, slot_id); -+ -+ /* We're done if controller is already running */ -+ if (readl(&xhci->op_regs->command) & CMD_RUN) -+ return 0; -+ -+ return xhci_start(xhci); -+} -+ - /* - * Reset a halted HC. - * -@@ -641,6 +684,15 @@ static int xhci_run_finished(struct xhci - return -ENODEV; - } - -+ if (xhci->quirks & XHCI_FAKE_DOORBELL) { -+ int err = xhci_fake_doorbell(xhci, 1); -+ if (err) { -+ xhci_halt(xhci); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return err; -+ } -+ } -+ - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - - if (xhci->quirks & XHCI_NEC_HOST) ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1908,6 +1908,7 @@ struct xhci_hcd { - #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) - #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) - #define XHCI_ZHAOXIN_HOST BIT_ULL(46) -+#define XHCI_FAKE_DOORBELL BIT_ULL(47) - - unsigned int num_active_eps; - unsigned int limit_active_eps; diff --git a/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch deleted file mode 100644 index 034d5b52fc79c6..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch +++ /dev/null @@ -1,101 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 24 Sep 2014 22:14:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom devices have broken CFE (bootloader) that leaves hardware in an -invalid state. It causes problems with booting Linux. On Northstar -devices kernel was randomly hanging in ~25% of tries during early init. -Hangs used to happen at random places in the start_kernel. On BCM53573 -kernel doesn't even seem to start booting. - -To workaround this problem we need to do following very early: -1) Clear 2 following bits in the SCTLR register: -#define CR_M (1 << 0) /* MMU enable */ -#define CR_C (1 << 2) /* Dcache enable */ -2) Flush the whole D-cache -3) Disable L2 cache - -Unfortunately this patch is not upstreamable as it does above things -unconditionally. We can't check if we are running on Broadcom platform -in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable -as it could break other devices support. - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) - OBJS += ll_char_wr.o font.o - endif - -+ifeq ($(CONFIG_ARCH_BCM_5301X),y) -+OBJS += head-bcm_5301x-mpcore.o -+OBJS += cache-v7-min.o -+endif -+ - ifeq ($(CONFIG_ARCH_SA1100),y) - OBJS += head-sa1100.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S -@@ -0,0 +1,37 @@ -+/* -+ * -+ * Platform specific tweaks. This is merged into head.S by the linker. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+ .section ".start", "ax" -+ -+/* -+ * This code section is spliced into the head code by the linker -+ */ -+ -+__plat_uncompress_start: -+ -+ @ Preserve r8/r7 i.e. kernel entry values -+ mov r12, r8 -+ -+ @ Clear MMU enable and Dcache enable bits -+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR -+ bic r0, #CR_C|CR_M -+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR -+ nop -+ -+ @ Call the cache invalidation routine -+ bl v7_flush_dcache_all -+ nop -+ mov r0,#0 -+ ldr r3, =0x19022000 @ L2 cache controller, control reg -+ str r0, [r3, #0x100] @ Disable L2 cache -+ nop -+ -+ @ Restore -+ mov r8, r12 ---- a/arch/arm/boot/compressed/cache-v7-min.S -+++ b/arch/arm/boot/compressed/cache-v7-min.S -@@ -12,6 +12,7 @@ - - #include - #include -+#include - - __INIT - -@@ -63,7 +64,7 @@ loop2: - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 -- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way -+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge loop2 - subs r4, r4, #1 @ decrement the way diff --git a/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch deleted file mode 100644 index 8039831a7874b5..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch +++ /dev/null @@ -1,675 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining - devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -92,3 +92,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -83,3 +83,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -149,3 +149,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -@@ -46,3 +46,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts -@@ -43,3 +43,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -86,3 +86,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -77,3 +77,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -77,6 +77,40 @@ - status = "okay"; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ label = "cpu"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &nandcs { - partitions { - compatible = "fixed-partitions"; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -130,3 +130,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -104,3 +104,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -94,3 +94,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ label = "cpu"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -38,6 +38,40 @@ - status = "okay"; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &nandcs { - partitions { - compatible = "fixed-partitions"; ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -91,6 +91,44 @@ - }; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &spi_nor { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -100,6 +100,44 @@ - vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &spi_nor { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -107,3 +107,42 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ diff --git a/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch deleted file mode 100644 index 773c3e9be61848..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ /dev/null @@ -1,64 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-linksys-ea9200.dtb \ - bcm4709-netgear-r7000.dtb \ -+ bcm4709-netgear-r7900.dtb \ - bcm4709-netgear-r8000.dtb \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-asus-rt-ac3100.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts -@@ -0,0 +1,42 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R7900 -+ * -+ * Copyright (C) 2016 Rafał Miłecki -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R7900"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; -+ }; -+ -+ axi@18000000 { -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch deleted file mode 100644 index e6140d9a704ba2..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 16 Oct 2014 20:52:16 +0200 -Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - drivers/mtd/ubi/attach.c | 5 +++++ - drivers/mtd/ubi/io.c | 4 ++++ - drivers/mtd/ubi/ubi.h | 1 + - 3 files changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi - #define AV_ADD BIT(1) - #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) - -+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ -+bool erase_all_next; -+ - /** - * find_or_add_av - internal function to find a volume, add a volume or do - * both (find and add if missing). -@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i - if (!ai) - return -ENOMEM; - -+ erase_all_next = false; -+ - #ifdef CONFIG_MTD_UBI_FASTMAP - /* On small flash devices we disable fastmap in any case. */ - if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device - } - - magic = be32_to_cpu(ec_hdr->magic); -+ if (magic == 0xdeadc0de) -+ erase_all_next = true; -+ if (erase_all_next) -+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; - if (magic != UBI_EC_HDR_MAGIC) { - if (mtd_is_eccerr(read_err)) - return UBI_IO_BAD_HDR_EBADMSG; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex; - extern struct blocking_notifier_head ubi_notifiers; - - /* attach.c */ -+extern bool erase_all_next; - struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, - int ec); - void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb); diff --git a/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch b/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch deleted file mode 100644 index 9fa41a4b7eb13c..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 20 Jun 2022 10:01:18 +0200 -Subject: [PATCH] net: disable GRO by default -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -In many cases GRO improves network performance however it comes at a -cost of chacksums calculations. In case of slow CPU and missing hardware -csum calculation support GRO can actually decrease network speed. - -On BCM4708 *disabling* GRO results in following NAT masquarade speed -changes: -1. 364 Mb/s → 396 Mb/s (packet steering disabled) -2. 341 Mb/s → 566 Mb/s (packet steering enabled) - -Signed-off-by: Rafał Miłecki ---- - include/linux/netdev_features.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/include/linux/netdev_features.h -+++ b/include/linux/netdev_features.h -@@ -242,10 +242,10 @@ static inline int find_next_netdev_featu - #define NETIF_F_UPPER_DISABLES NETIF_F_LRO - - /* changeable features with no special hardware requirements */ --#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) -+#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO) - - /* Changeable features with no special hardware requirements that defaults to off. */ --#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD) -+#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) - - #define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \ - NETIF_F_HW_VLAN_CTAG_RX | \ diff --git a/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch b/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch deleted file mode 100644 index 3a2f4b06ed6d8c..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 10 Jun 2022 13:10:47 +0200 -Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -bgmac allocates new replacement buffer before handling each received -frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU -time. Ideally bgmac should just respect currently set MTU but it isn't -the case right now. For now just revert back to the old limited frame -size. - -This change bumps NAT masquarade speed by ~95%. - -Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") -Signed-off-by: Rafał Miłecki ---- - drivers/net/ethernet/broadcom/bgmac.h | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -328,8 +328,7 @@ - #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ - #define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \ - BGMAC_RX_FRAME_OFFSET) --/* Jumbo frame size with FCS */ --#define BGMAC_RX_MAX_FRAME_SIZE 9724 -+#define BGMAC_RX_MAX_FRAME_SIZE 1536 - #define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) - #define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \ - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) diff --git a/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch deleted file mode 100644 index 0a52ca98eeb7bd..00000000000000 --- a/target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 Aug 2016 10:30:41 +0200 -Subject: [PATCH] BCM53573 minor hacks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -54,6 +54,7 @@ - , - , - ; -+ clocks = <&ilp>; - }; - - clocks { ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -330,14 +330,6 @@ static int bcma_register_devices(struct - } - #endif - --#ifdef CONFIG_BCMA_SFLASH -- if (bus->drv_cc.sflash.present) { -- err = platform_device_register(&bcma_sflash_dev); -- if (err) -- bcma_err(bus, "Error registering serial flash\n"); -- } --#endif -- - #ifdef CONFIG_BCMA_NFLASH - if (bus->drv_cc.nflash.present) { - err = platform_device_register(&bcma_nflash_dev); -@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b - bcma_register_core(bus, core); - } - -+#ifdef CONFIG_BCMA_SFLASH -+ if (bus->drv_cc.sflash.present) { -+ err = platform_device_register(&bcma_sflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering serial flash\n"); -+ } -+#endif -+ - /* Try to get SPROM */ - err = bcma_sprom_get(bus); - if (err == -ENOENT) { ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1029,6 +1030,16 @@ static void __init arch_timer_of_configu - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_rate = rate; - -+ /* Get clk rate through clk driver if present */ -+ if (!arch_timer_rate) { -+ struct clk *clk = of_clk_get(np, 0); -+ -+ if (!IS_ERR(clk)) { -+ if (!clk_prepare_enable(clk)) -+ arch_timer_rate = clk_get_rate(clk); -+ } -+ } -+ - /* Check the timer frequency. */ - if (validate_timer_rate()) - pr_warn("frequency not available\n");