Open5GS EPC & srsRAN 4G with ZeroMQ UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF(PGW-U))

This describes a simple configuration for working Open5GS EPC and eUPF(eBPF/XDP UPF(PGW-U)). In particular, see here for eUPF.

Sample Configurations and Miscellaneous for Mobile Network

Overview of Open5GS CUPS-enabled EPC Simulation Mobile Network
Changes in configuration files of Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN
Network settings of Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN
- Network settings of eUPF and Data Network Gateway
Build Open5GS, eUPF and srsRAN 4G ZMQ UE / RAN
Run Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN
Ping google.com
- Case for going through PDN 10.45.0.0/16
Changelog (summary)

Overview of Open5GS CUPS-enabled EPC Simulation Mobile Network

This describes a simple configuration of C-Plane, eUPF and Data Network Gateway for Open5GS EPC. Note that this configuration is implemented with Virtualbox VMs.

The following minimum configuration was set as a condition.

One SGW-U/UPF(PGW-U) and Data Network Gateway
One UE and one APN

The built simulation environment is as follows.

The EPC / eBPF/XDP PGW-U / UE / RAN used are as follows.

EPC - Open5GS v2.7.0 (2024.03.24) - https://github.com/open5gs/open5gs
eBPF/XDP PGW-U - eUPF v0.6.1 (2024.01.25) - https://github.com/edgecomllc/eupf
UE / RAN - srsRAN 4G (2024.02.01) - https://github.com/srsran/srsRAN_4G

Each VMs are as follows.

VM	SW & Role	IP address	OS	CPU (Min)	Memory (Min)	HDD (Min)
VM1	Open5GS EPC C-Plane	192.168.0.111/24	Ubuntu 22.04	1	2GB	20GB
VM2	Open5GS EPC U-Plane(SGW-U)	192.168.0.112/24	Ubuntu 22.04	1	1GB	20GB
VM-UP	eUPF U-Plane(PGW-U)	192.168.0.151/24	Ubuntu 22.04	1	2GB	20GB
VM-DN	Data Network Gateway	192.168.0.152/24	Ubuntu 22.04	1	1GB	10GB
VM3	srsRAN 4G ZMQ RAN (eNodeB)	192.168.0.121/24	Ubuntu 22.04	1	2GB	10GB
VM4	srsRAN 4G ZMQ UE	192.168.0.122/24	Ubuntu 22.04	1	2GB	10GB

The network interfaces of each VM are as follows.

VM	Device	Network Adapter	IP address	Interface	XDP
VM1	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.111/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.14.111/24	Sxb (N4 for 5GC)	--
VM2	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.112/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.13.112/24	S1-U,S5u (N3 for 5GC)	--
VM-UP	~~enp0s3~~	~~NAT(default)~~	~~10.0.2.15/24~~	~~(VM default NW)~~ down	--
	enp0s8	Bridged Adapter	192.168.0.151/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.13.151/24	S5u (N3 for 5GC)	x
	enp0s10	NAT Network	192.168.14.151/24	Sxb (N4 for 5GC)	--
	enp0s16	NAT Network	192.168.16.151/24	SGi (N6 for 5GC)	x
VM-DN	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.152/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.16.152/24	SGi (N6 for 5GC), default GW for VM-UP	--
VM3	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.121/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.13.121/24	S1-U (N3 for 5GC)	--
VM4	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.122/24	(Mgmt NW)	--

NAT networks of Virtualbox are as follows.

Network Name	Network CIDR	Note
N3	192.168.13.0/24	S1-U,S5u for EPC
N4	192.168.14.0/24	Sxb for EPC
N6	192.168.16.0/24	SGi for EPC

Subscriber Information (other information is the same) is as follows.

UE	IMSI	APN	OP/OPc
UE	001010000000100	internet	OPc

I registered these information with the Open5GS WebUI. In addition, 3GPP TS 35.208 "4.3 Test Sets" is published by 3GPP as test data for the 3GPP authentication and key generation functions (MILENAGE).

The PDN is as follows.

PDN	APN	TUNnel interface of UE
10.45.0.0/16	internet	tun_srsue

The main information of eNodeB is as follows.

MCC	MNC	TAC	eNodeB ID	Cell ID	E-UTRAN Cell ID
001	01	1	0x19b	0x01	0x19b01

Changes in configuration files of Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

Please refer to the following for building Open5GS, eUPF and srsRAN 4G ZMQ respectively.

Open5GS v2.7.0 (2024.03.24) - https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/
eUPF v0.6.1 (2024.01.25) - https://github.com/s5uishida/install_eupf
srsRAN 4G (2024.02.01) - https://github.com/s5uishida/build_srsran_4g_zmq_disable_rf_plugins

Changes in configuration files of Open5GS EPC C-Plane

The following parameters can be used in the logic that selects SGW-U and UPF(PGW-U) as the connection destination by PFCP.

APN
TAC (Tracking Area Code)
e_CellID

For the sake of simplicity, I used only APN this time.

open5gs/install/etc/open5gs/mme.yaml

--- mme.yaml.orig       2024-03-24 15:36:48.000000000 +0900
+++ mme.yaml    2024-03-24 22:45:30.234769981 +0900
@@ -11,7 +11,7 @@
   freeDiameter: /root/open5gs/install/etc/freeDiameter/mme.conf
   s1ap:
     server:
-      - address: 127.0.0.2
+      - address: 192.168.0.111
   gtpc:
     server:
       - address: 127.0.0.2
@@ -26,14 +26,14 @@
         port: 9090
   gummei:
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
       mme_gid: 2
       mme_code: 1
   tai:
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
       tac: 1
   security:
     integrity_order : [ EIA2, EIA1, EIA0 ]

open5gs/install/etc/open5gs/sgwc.yaml

--- sgwc.yaml.orig      2024-03-24 15:36:48.000000000 +0900
+++ sgwc.yaml   2024-03-24 22:45:54.437378657 +0900
@@ -13,10 +13,11 @@
       - address: 127.0.0.3
   pfcp:
     server:
-      - address: 127.0.0.3
+      - address: 192.168.0.111
     client:
       sgwu:
-        - address: 127.0.0.6
+        - address: 192.168.0.112
+          apn: internet
 
 ################################################################################
 # GTP-C Server

open5gs/install/etc/open5gs/smf.yaml

--- smf.yaml.orig       2024-03-24 15:36:48.000000000 +0900
+++ smf.yaml    2024-03-25 00:10:24.030693017 +0900
@@ -8,39 +8,29 @@
 #    peer: 64
 
 smf:
-  sbi:
-    server:
-      - address: 127.0.0.4
-        port: 7777
-    client:
-#      nrf:
-#        - uri: http://127.0.0.10:7777
-      scp:
-        - uri: http://127.0.0.200:7777
   pfcp:
     server:
-      - address: 127.0.0.4
+      - address: 192.168.14.111
     client:
       upf:
-        - address: 127.0.0.7
+        - address: 192.168.14.151
+          dnn: internet
   gtpc:
     server:
       - address: 127.0.0.4
   gtpu:
     server:
-      - address: 127.0.0.4
+      - address: 192.168.14.111
   metrics:
     server:
       - address: 127.0.0.4
         port: 9090
   session:
     - subnet: 10.45.0.1/16
-    - subnet: 2001:db8:cafe::1/48
+      dnn: internet
   dns:
     - 8.8.8.8
     - 8.8.4.4
-    - 2001:4860:4860::8888
-    - 2001:4860:4860::8844
   mtu: 1400
 #  p-cscf:
 #    - 127.0.0.1

Changes in configuration files of Open5GS EPC U-Plane

open5gs/install/etc/open5gs/sgwu.yaml

--- sgwu.yaml.orig      2024-03-24 15:36:48.000000000 +0900
+++ sgwu.yaml   2024-03-24 22:41:40.582500287 +0900
@@ -10,13 +10,13 @@
 sgwu:
   pfcp:
     server:
-      - address: 127.0.0.6
+      - address: 192.168.0.112
     client:
 #      sgwc:    # SGW-U PFCP Client try to associate SGW-C PFCP Server
 #        - address: 127.0.0.3
   gtpu:
     server:
-      - address: 127.0.0.6
+      - address: 192.168.13.112
 
 ################################################################################
 # PFCP Server

Changes in configuration files of eUPF

See here for the original files.

eupf/config.yml
There is no change.

Changes in configuration files of srsRAN 4G ZMQ UE / RAN

Changes in configuration files of RAN

srsRAN_4G/build/srsenb/enb.conf

--- enb.conf.example    2024-02-03 23:26:02.000000000 +0900
+++ enb.conf    2024-03-10 17:00:27.383907337 +0900
@@ -22,9 +22,9 @@
 enb_id = 0x19B
 mcc = 001
 mnc = 01
-mme_addr = 127.0.1.100
-gtp_bind_addr = 127.0.1.1
-s1c_bind_addr = 127.0.1.1
+mme_addr = 192.168.0.111
+gtp_bind_addr = 192.168.13.121
+s1c_bind_addr = 192.168.0.121
 s1c_bind_port = 0
 n_prb = 50
 #tm = 4
@@ -80,8 +80,8 @@
 #time_adv_nsamples = auto
 
 # Example for ZMQ-based operation with TCP transport for I/Q samples
-#device_name = zmq
-#device_args = fail_on_disconnect=true,tx_port=tcp://*:2000,rx_port=tcp://localhost:2001,id=enb,base_srate=23.04e6
+device_name = zmq
+device_args = fail_on_disconnect=true,tx_port=tcp://192.168.0.121:2000,rx_port=tcp://192.168.0.122:2001,id=enb,base_srate=23.04e6
 
 #####################################################################
 # Packet capture configuration

srsRAN_4G/build/srsenb/rr.conf

--- rr.conf.example     2024-02-03 23:26:02.000000000 +0900
+++ rr.conf     2023-05-02 11:52:54.000000000 +0900
@@ -55,7 +55,7 @@
   {
     // rf_port = 0;
     cell_id = 0x01;
-    tac = 0x0007;
+    tac = 0x0001;
     pci = 1;
     // root_seq_idx = 204;
     dl_earfcn = 3350;

Changes in configuration files of UE

srsRAN_4G/build/srsue/ue.conf

--- ue.conf.example     2024-02-03 23:26:02.000000000 +0900
+++ ue.conf     2023-05-02 12:01:28.000000000 +0900
@@ -42,8 +42,8 @@
 #continuous_tx     = auto
 
 # Example for ZMQ-based operation with TCP transport for I/Q samples
-#device_name = zmq
-#device_args = tx_port=tcp://*:2001,rx_port=tcp://localhost:2000,id=ue,base_srate=23.04e6
+device_name = zmq
+device_args = tx_port=tcp://192.168.0.122:2001,rx_port=tcp://192.168.0.121:2000,id=ue,base_srate=23.04e6
 
 #####################################################################
 # EUTRA RAT configuration
@@ -139,9 +139,9 @@
 [usim]
 mode = soft
 algo = milenage
-opc  = 63BFA50EE6523365FF14C1F45F88737D
-k    = 00112233445566778899aabbccddeeff
-imsi = 001010123456780
+opc  = E8ED289DEBA952E4283B54E88E6183CA
+k    = 465B5CE8B199B49FAA5F0A2EE238A6BC
+imsi = 001010000000100
 imei = 353490069873319
 #reader =
 #pin  = 1234
@@ -180,8 +180,8 @@
 #                      Supported: 0 - NULL, 1 - Snow3G, 2 - AES, 3 - ZUC
 #####################################################################
 [nas]
-#apn = internetinternet
-#apn_protocol = ipv4
+apn = internet
+apn_protocol = ipv4
 #user = srsuser
 #pass = srspass
 #force_imsi_attach = false

Network settings of Open5GS 5GC, eUPF and srsRAN 4G ZMQ UE / RAN

Network settings of eUPF and Data Network Gateway

See this1 and this2.

Build Open5GS, eUPF and srsRAN 4G ZMQ UE / RAN

Please refer to the following for building Open5GS, eUPF and srsRAN 4G ZMQ UE / RAN respectively.

Open5GS v2.7.0 (2024.03.24) - https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/
eUPF v0.6.1 (2024.01.25)- https://github.com/s5uishida/install_eupf
srsRAN 4G (2024.02.01) - https://github.com/s5uishida/build_srsran_4g_zmq_disable_rf_plugins

Install MongoDB on Open5GS EPC C-Plane machine. MongoDB Compass is a convenient tool to look at the MongoDB database.

Run Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

First run eUPF and EPC U-Plane(SGW-U), then EPC C-Plane, the RAN, and the UE.

Run eUPF

See this.

Run Open5GS EPC U-Plane

./install/bin/open5gs-sgwud &

Run Open5GS EPC C-Plane

./install/bin/open5gs-mmed &
./install/bin/open5gs-sgwcd &
./install/bin/open5gs-smfd &
./install/bin/open5gs-hssd &
./install/bin/open5gs-pcrfd &

The PFCP association log between eUPF and Open5GS SMF is as follows.

2024/03/24 23:59:47 INF Got Association Setup Request from: 192.168.14.111. 

2024/03/24 23:59:47 INF 
Association Setup Request:
  Node ID: 192.168.14.111
  Recovery Time: 2024-03-24 23:59:47 +0900 JST

2024/03/24 23:59:47 INF Saving new association: &{ID:192.168.14.111 Addr:192.168.14.111 NextSessionID:1 NextSequenceID:1 Sessions:map[] HeartbeatChannel:0xc00057e000 FailedHeartbeats:0 HeartbeatsActive:false Mutex:{state:0 sema:0}}

Run srsRAN 4G ZMQ RAN

Run srsRAN 4G ZMQ RAN and connect to Open5GS EPC.

# cd srsRAN_4G/build/srsenb
# ./src/srsenb enb.conf
---  Software Radio Systems LTE eNodeB  ---

Reading configuration file enb.conf...

Built in Release mode using commit ec29b0c1f on branch master.

Opening 1 channels in RF device=zmq with args=fail_on_disconnect=true,tx_port=tcp://192.168.0.121:2000,rx_port=tcp://192.168.0.122:2001,id=enb,base_srate=23.04e6
Supported RF device list: zmq file
CHx base_srate=23.04e6
CHx id=enb
Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12 decimation)
CH0 rx_port=tcp://192.168.0.122:2001
CH0 tx_port=tcp://192.168.0.121:2000
CH0 fail_on_disconnect=true

==== eNodeB started ===
Type <t> to view trace
Current sample rate is 11.52 MHz with a base rate of 23.04 MHz (x2 decimation)
Current sample rate is 11.52 MHz with a base rate of 23.04 MHz (x2 decimation)
Setting frequency: DL=2680.0 Mhz, UL=2560.0 MHz for cc_idx=0 nof_prb=50

The Open5GS C-Plane log when executed is as follows.

03/25 00:00:16.580: [mme] INFO: eNB-S1 accepted[192.168.0.121]:44139 in s1_path module (../src/mme/s1ap-sctp.c:114)
03/25 00:00:16.580: [mme] INFO: eNB-S1 accepted[192.168.0.121] in master_sm module (../src/mme/mme-sm.c:108)
03/25 00:00:16.580: [mme] INFO: [Added] Number of eNBs is now 1 (../src/mme/mme-context.c:2829)
03/25 00:00:16.580: [mme] INFO: eNB-S1[192.168.0.121] max_num_of_ostreams : 30 (../src/mme/mme-sm.c:150)

Run srsRAN 4G ZMQ UE

Run srsRAN 4G ZMQ UE and connect to Open5GS EPC.

# cd srsRAN_4G/build/srsue
# ./src/srsue ue.conf
Reading configuration file ue.conf...

Built in Release mode using commit ec29b0c1f on branch master.

Opening 1 channels in RF device=zmq with args=tx_port=tcp://192.168.0.122:2001,rx_port=tcp://192.168.0.121:2000,id=ue,base_srate=23.04e6
Supported RF device list: zmq file
CHx base_srate=23.04e6
CHx id=ue
Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12 decimation)
CH0 rx_port=tcp://192.168.0.121:2000
CH0 tx_port=tcp://192.168.0.122:2001
Waiting PHY to initialize ... done!
Attaching UE...
Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12 decimation)
Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12 decimation)
.
Found Cell:  Mode=FDD, PCI=1, PRB=50, Ports=1, CP=Normal, CFO=-0.2 KHz
Current sample rate is 11.52 MHz with a base rate of 23.04 MHz (x2 decimation)
Current sample rate is 11.52 MHz with a base rate of 23.04 MHz (x2 decimation)
Found PLMN:  Id=00101, TAC=1
Random Access Transmission: seq=40, tti=181, ra-rnti=0x2
RRC Connected
Random Access Complete.     c-rnti=0x46, ta=0
Network attach successful. IP: 10.45.0.2
 nTp) ((t) 24/3/2024 15:0:50 TZ:99

The Open5GS C-Plane log when executed is as follows.

03/25 00:00:50.191: [mme] INFO: InitialUEMessage (../src/mme/s1ap-handler.c:406)
03/25 00:00:50.191: [mme] INFO: [Added] Number of eNB-UEs is now 1 (../src/mme/mme-context.c:4735)
03/25 00:00:50.191: [mme] INFO: Unknown UE by S_TMSI[G:2,C:1,M_TMSI:0xc000033a] (../src/mme/s1ap-handler.c:485)
03/25 00:00:50.191: [mme] INFO:     ENB_UE_S1AP_ID[1] MME_UE_S1AP_ID[1] TAC[1] CellID[0x19b01] (../src/mme/s1ap-handler.c:585)
03/25 00:00:50.191: [mme] INFO: Unknown UE by GUTI[G:2,C:1,M_TMSI:0xc000033a] (../src/mme/mme-context.c:3586)
03/25 00:00:50.191: [mme] INFO: [Added] Number of MME-UEs is now 1 (../src/mme/mme-context.c:3379)
03/25 00:00:50.191: [emm] INFO: [] Attach request (../src/mme/emm-sm.c:423)
03/25 00:00:50.191: [emm] INFO:     GUTI[G:2,C:1,M_TMSI:0xc000033a] IMSI[Unknown IMSI] (../src/mme/emm-handler.c:236)
03/25 00:00:50.234: [emm] INFO: Identity response (../src/mme/emm-sm.c:393)
03/25 00:00:50.234: [emm] INFO:     IMSI[001010000000100] (../src/mme/emm-handler.c:428)
03/25 00:00:50.366: [mme] INFO: [Added] Number of MME-Sessions is now 1 (../src/mme/mme-context.c:4749)
03/25 00:00:50.447: [sgwc] INFO: [Added] Number of SGWC-UEs is now 1 (../src/sgwc/context.c:239)
03/25 00:00:50.448: [sgwc] INFO: [Added] Number of SGWC-Sessions is now 1 (../src/sgwc/context.c:882)
03/25 00:00:50.448: [sgwc] INFO: UE IMSI[001010000000100] APN[internet] (../src/sgwc/s11-handler.c:239)
03/25 00:00:50.448: [gtp] INFO: gtp_connect() [127.0.0.4]:2123 (../lib/gtp/path.c:60)
03/25 00:00:50.449: [smf] INFO: [Added] Number of SMF-UEs is now 1 (../src/smf/context.c:1019)
03/25 00:00:50.449: [smf] INFO: [Added] Number of SMF-Sessions is now 1 (../src/smf/context.c:3090)
03/25 00:00:50.449: [smf] INFO: UE IMSI[001010000000100] APN[internet] IPv4[10.45.0.2] IPv6[] (../src/smf/s5c-handler.c:275)
03/25 00:00:50.453: [gtp] INFO: gtp_connect() [192.168.13.151]:2152 (../lib/gtp/path.c:60)
03/25 00:00:50.778: [emm] INFO: [001010000000100] Attach complete (../src/mme/emm-sm.c:1384)
03/25 00:00:50.778: [emm] INFO:     IMSI[001010000000100] (../src/mme/emm-handler.c:275)
03/25 00:00:50.779: [emm] INFO:     UTC [2024-03-24T15:00:50] Timezone[0]/DST[0] (../src/mme/emm-handler.c:281)
03/25 00:00:50.779: [emm] INFO:     LOCAL [2024-03-25T00:00:50] Timezone[32400]/DST[0] (../src/mme/emm-handler.c:285)

The Open5GS U-Plane log when executed is as follows.

03/25 00:00:50.369: [sgwu] INFO: UE F-SEID[UP:0xf2a CP:0x200] (../src/sgwu/context.c:171)
03/25 00:00:50.369: [sgwu] INFO: [Added] Number of SGWU-Sessions is now 1 (../src/sgwu/context.c:176)
03/25 00:00:50.374: [gtp] INFO: gtp_connect() [192.168.13.151]:2152 (../lib/gtp/path.c:60)
03/25 00:00:50.701: [gtp] INFO: gtp_connect() [192.168.13.121]:2152 (../lib/gtp/path.c:60)

The PDU session establishment log of eUPF is as follows.

2024/03/25 00:00:50 INF Got Session Establishment Request from: 192.168.14.111.
2024/03/25 00:00:50 INF 
Session Establishment Request:
  CreatePDR ID: 1 
    FAR ID: 1 
    QER ID: 1 
    Source Interface: 1 
    UE IPv4 Address: 10.45.0.2 
  CreatePDR ID: 2 
    Outer Header Removal: 0 
    FAR ID: 2 
    QER ID: 1 
    Source Interface: 0 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
    UE IPv4 Address: 10.45.0.2 
  CreatePDR ID: 3 
    Outer Header Removal: 0 
    FAR ID: 1 
    Source Interface: 3 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
  CreatePDR ID: 4 
    Outer Header Removal: 0 
    FAR ID: 3 
    Source Interface: 0 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
    SDF Filter: permit out 58 from ff02::2/128 to assigned 
  CreateFAR ID: 1 
    Apply Action: [2 0] 
    Forwarding Parameters:
      Network Instance:internet 
      Outer Header Creation: &{OuterHeaderCreationDescription:256 TEID:29284 IPv4Address:192.168.13.112 IPv6Address:<nil> PortNumber:0 CTag:0 STag:0} 
  CreateFAR ID: 2 
    Apply Action: [2 0] 
    Forwarding Parameters:
      Network Instance:internet 
  CreateFAR ID: 3 
    Apply Action: [2 0] 
    Forwarding Parameters:
      Network Instance:internet 
      Outer Header Creation: &{OuterHeaderCreationDescription:256 TEID:1 IPv4Address:192.168.14.111 IPv6Address:<nil> PortNumber:0 CTag:0 STag:0} 
  CreateQER ID: 1 
    Gate Status DL: 0 
    Gate Status UL: 0 
    Max Bitrate DL: 1000000 
    Max Bitrate UL: 1000000 
  CreateBAR ID: 1

2024/03/25 00:00:50 INF Saving FAR info to session: 1, {Action:2 OuterHeaderCreation:1 Teid:29284 RemoteIP:1879943360 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/25 00:00:50 INF WARN: No OuterHeaderCreation
2024/03/25 00:00:50 INF Saving FAR info to session: 2, {Action:2 OuterHeaderCreation:0 Teid:0 RemoteIP:0 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/25 00:00:50 INF Saving FAR info to session: 3, {Action:2 OuterHeaderCreation:1 Teid:1 RemoteIP:1863231680 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/25 00:00:50 INF Saving QER info to session: 1, {GateStatusUL:0 GateStatusDL:0 Qfi:0 MaxBitrateUL:1000000000 MaxBitrateDL:1000000000 StartUL:0 StartDL:0}
2024/03/25 00:00:50 Matched groups: [permit out 58 from ff02::2/128 to assigned 58 ff02::2 128  assigned  ]
2024/03/25 00:00:50 INF Session Establishment Request from 192.168.14.111 accepted.

The result of ip addr show on VM4 (UE) is as follows.

7: tun_srsue: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 500
    link/none 
    inet 10.45.0.2/24 scope global tun_srsue
       valid_lft forever preferred_lft forever

Ping google.com

Specify the UE's TUNnel interface and try ping.

Case for going through PDN 10.45.0.0/16

Run tcpdump on VM-DN and check that the packet goes through N6 (enp0s9).

ping google.com on VM4 (UE)

# ping google.com -I tun_srsue -n
PING google.com (142.251.42.174) from 10.45.0.2 tun_srsue: 56(84) bytes of data.
64 bytes from 142.251.42.174: icmp_seq=1 ttl=61 time=77.5 ms
64 bytes from 142.251.42.174: icmp_seq=2 ttl=61 time=62.5 ms
64 bytes from 142.251.42.174: icmp_seq=3 ttl=61 time=58.9 ms

Run tcpdump on VM-DN

# tcpdump -i enp0s9 -n
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on enp0s9, link-type EN10MB (Ethernet), snapshot length 262144 bytes
00:03:48.765656 IP 10.45.0.2 > 142.251.42.174: ICMP echo request, id 8, seq 1, length 64
00:03:48.780681 IP 142.251.42.174 > 10.45.0.2: ICMP echo reply, id 8, seq 1, length 64
00:03:49.756835 IP 10.45.0.2 > 142.251.42.174: ICMP echo request, id 8, seq 2, length 64
00:03:49.772324 IP 142.251.42.174 > 10.45.0.2: ICMP echo reply, id 8, seq 2, length 64
00:03:50.749224 IP 10.45.0.2 > 142.251.42.174: ICMP echo request, id 8, seq 3, length 64
00:03:50.765434 IP 142.251.42.174 > 10.45.0.2: ICMP echo reply, id 8, seq 3, length 64

See /sys/kernel/debug/tracing/trace_pipe on VM-UP

# cat /sys/kernel/debug/tracing/trace_pipe
...
          <idle>-0       [000] d.s31  1052.318223: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31  1052.318226: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31  1052.318229: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31  1052.318230: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31  1052.318231: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31  1052.318232: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31  1052.318232: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31  1052.318233: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.251.42.174
          <idle>-0       [000] d.s31  1052.318234: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31  1052.318235: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31  1052.318236: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31  1052.318237: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1052.318238: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31  1052.318244: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.251.42.174: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31  1052.333493: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31  1052.333495: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1052.333497: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:29284
          <idle>-0       [000] d.s31  1052.333499: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.112
          <idle>-0       [000] d.s31  1052.333505: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.112: nexthop: 192.168.13.112
          <idle>-0       [000] d.s31  1053.309408: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31  1053.309412: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31  1053.309414: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31  1053.309415: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31  1053.309416: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31  1053.309417: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31  1053.309418: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31  1053.309419: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.251.42.174
          <idle>-0       [000] d.s31  1053.309420: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31  1053.309420: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31  1053.309421: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31  1053.309422: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1053.309423: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31  1053.309430: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.251.42.174: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31  1053.325126: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31  1053.325128: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1053.325129: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:29284
          <idle>-0       [000] d.s31  1053.325131: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.112
          <idle>-0       [000] d.s31  1053.325138: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.112: nexthop: 192.168.13.112
          <idle>-0       [000] d.s31  1054.301802: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31  1054.301805: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31  1054.301807: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31  1054.301809: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31  1054.301809: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31  1054.301811: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31  1054.301811: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31  1054.301812: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.251.42.174
          <idle>-0       [000] d.s31  1054.301813: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31  1054.301814: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31  1054.301815: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31  1054.301816: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1054.301817: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31  1054.301823: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.251.42.174: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31  1054.318247: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31  1054.318249: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31  1054.318250: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:29284
          <idle>-0       [000] d.s31  1054.318252: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.112
          <idle>-0       [000] d.s31  1054.318258: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.112: nexthop: 192.168.13.112
...

In addition to ping, you may try to access the web by specifying the TUNnel interface with curl as follows.

curl google.com on VM4 (UE)

# curl --interface tun_srsue google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="http://www.google.com/">here</A>.
</BODY></HTML>

Run tcpdump on VM-DN

00:05:55.590559 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [S], seq 2820344737, win 64240, options [mss 1460,sackOK,TS val 2885912499 ecr 0,nop,wscale 7], length 0
00:05:55.610550 IP 142.251.42.174.80 > 10.45.0.2.59538: Flags [S.], seq 15232001, ack 2820344738, win 65535, options [mss 1460], length 0
00:05:55.765601 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [.], ack 1, win 64240, length 0
00:05:55.765773 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [P.], seq 1:75, ack 1, win 64240, length 74: HTTP: GET / HTTP/1.1
00:05:55.766069 IP 142.251.42.174.80 > 10.45.0.2.59538: Flags [.], ack 75, win 65535, length 0
00:05:55.843742 IP 142.251.42.174.80 > 10.45.0.2.59538: Flags [P.], seq 1:774, ack 75, win 65535, length 773: HTTP: HTTP/1.1 301 Moved Permanently
00:05:55.876731 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [.], ack 774, win 63467, length 0
00:05:55.876997 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [F.], seq 75, ack 774, win 63467, length 0
00:05:55.877133 IP 142.251.42.174.80 > 10.45.0.2.59538: Flags [.], ack 76, win 65535, length 0
00:05:55.914972 IP 142.251.42.174.80 > 10.45.0.2.59538: Flags [F.], seq 774, ack 76, win 65535, length 0
00:05:55.983055 IP 10.45.0.2.59538 > 142.251.42.174.80: Flags [.], ack 775, win 63467, length 0

Also, when trying iperf3 client on VM4 (UE), first change the default GW interface to tun_srsue. Below is an example of my VirtualBox VM (VM4).

# ip link set dev enp0s3 down
# ip route add default dev tun_srsue

Next, to avoid IP fragmentation, change the MTU of tun_srsue interface of srsRAN_4G UE as follows.

# ip link set tun_srsue mtu 1450

Then, bind the assigned IP address 10.45.0.2 and run iperf3 client. The following is an example of connecting to iperf3 server running on VM-DN 192.168.16.152.

# iperf3 -B 10.45.0.2 -c 192.168.16.152

You could now connect to the PDN and send any packets on the network using eUPF.

Now you could work Open5GS EPC with eUPF. I would like to thank the excellent developers and all the contributors of Open5GS, eUPF and srsRAN 4G.

Changelog (summary)

[2024.03.24] Updated to eUPF v0.6.1.
[2023.12.05] The eUPF version confirmed to work in the changelog on 2023.12.04 has been tagged as v0.6.0.
[2023.12.05] Updated to Open5GS v2.7.0.
[2023.12.04] Updated as eUPF FTUP feature has been merged into main branch.
[2023.11.24] Updated to eUPF 120-upf-ftup-fteid branch that supports FTUP.
[2023.10.29] Initial release.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Open5GS EPC & srsRAN 4G with ZeroMQ UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF(PGW-U))

Sample Configurations and Miscellaneous for Mobile Network

Table of Contents

Overview of Open5GS CUPS-enabled EPC Simulation Mobile Network

Changes in configuration files of Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

Changes in configuration files of Open5GS EPC C-Plane

Changes in configuration files of Open5GS EPC U-Plane

Changes in configuration files of eUPF

Changes in configuration files of srsRAN 4G ZMQ UE / RAN

Changes in configuration files of RAN

Changes in configuration files of UE

Network settings of Open5GS 5GC, eUPF and srsRAN 4G ZMQ UE / RAN

Network settings of eUPF and Data Network Gateway

Build Open5GS, eUPF and srsRAN 4G ZMQ UE / RAN

Run Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

Run eUPF

Run Open5GS EPC U-Plane

Run Open5GS EPC C-Plane

Run srsRAN 4G ZMQ RAN

Run srsRAN 4G ZMQ UE

Ping google.com

Case for going through PDN 10.45.0.0/16

Changelog (summary)

Files

README.md

Latest commit

History

README.md

File metadata and controls

Open5GS EPC & srsRAN 4G with ZeroMQ UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF(PGW-U))

Sample Configurations and Miscellaneous for Mobile Network

Table of Contents

Overview of Open5GS CUPS-enabled EPC Simulation Mobile Network

Changes in configuration files of Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

Changes in configuration files of Open5GS EPC C-Plane

Changes in configuration files of Open5GS EPC U-Plane

Changes in configuration files of eUPF

Changes in configuration files of srsRAN 4G ZMQ UE / RAN

Changes in configuration files of RAN

Changes in configuration files of UE

Network settings of Open5GS 5GC, eUPF and srsRAN 4G ZMQ UE / RAN

Network settings of eUPF and Data Network Gateway

Build Open5GS, eUPF and srsRAN 4G ZMQ UE / RAN

Run Open5GS EPC, eUPF and srsRAN 4G ZMQ UE / RAN

Run eUPF

Run Open5GS EPC U-Plane

Run Open5GS EPC C-Plane

Run srsRAN 4G ZMQ RAN

Run srsRAN 4G ZMQ UE

Ping google.com

Case for going through PDN 10.45.0.0/16

Changelog (summary)