tinys3.py

# TinyS3 Helper Library
# 2022 Seon Rozenblum, Unexpected Maker
#
# Project home:
#   https://tinys3.io
#

# Import required libraries
import time
import board
from digitalio import DigitalInOut, Direction, Pull
from analogio import AnalogIn

# Setup the NeoPixel power pin
pixel_power = DigitalInOut(board.NEOPIXEL_POWER)
pixel_power.direction = Direction.OUTPUT

# Setup the BATTERY voltage sense pin
vbat_voltage = AnalogIn(board.BATTERY)

# Setup the VBUS sense pin
vbus_sense = DigitalInOut(board.VBUS_SENSE)
vbus_sense.direction = Direction.INPUT

   
# Helper functions
def set_pixel_power(state):
    """Enable or Disable power to the onboard NeoPixel to either show colour, or to reduce power fro deep sleep."""
    global pixel_power
    pixel_power.value = state
    
def get_battery_voltage():
    """Get the approximate battery voltage."""
    # I don't really understand what CP is doing under the hood here for the ADC range & calibration,
    # but the onboard voltage divider for VBAT sense is setup to deliver 1.1V to the ADC based on it's
    # default factory configuration.
    # This forumla should show the nominal 4.2V max capacity (approximately) when 5V is present and the
    # VBAT is in charge state for a 1S LiPo battery with a max capacity of 4.2V   
    global vbat_voltage
    return (vbat_voltage.value / 5371)

def get_vbus_present():
    """Detect if VBUS (5V) power source is present"""
    global vbus_sense
    return vbus_sense.value

def rgb_color_wheel(wheel_pos):
    """Color wheel to allow for cycling through the rainbow of RGB colors."""
    wheel_pos = wheel_pos % 255

    if wheel_pos < 85:
        return 255 - wheel_pos * 3, 0, wheel_pos * 3
    elif wheel_pos < 170:
        wheel_pos -= 85
        return 0, wheel_pos * 3, 255 - wheel_pos * 3
    else:
        wheel_pos -= 170
        return wheel_pos * 3, 255 - wheel_pos * 3, 0