Cameras Config

Cameras

Example:

"cameras": [
  {
    "name": "DLink One",
    "manufacturer": "DLink",
    "model": "DLink 123",
    "serialNumber": "12345",
    "firmwareRevision": "1.0",
    "motion": true,
    "doorbell": true,
    "switches": true,
    "motionTimeout": 0,
    "videoConfig": {
      "source": "-i rtsp://192.168.178.1/onvif1",
      "maxWidth": 1280,
      "maxHeight": 720,
      "maxFPS": 30,
      "socketPort": 8100
    },
    "mqtt": {
      "motionTopic": "sricam/motion",
      "motionMessage": "ON",
      "motionResetTopic": "sricam/motion",
      "motionResetMessage": "OFF"
    }
  }
]

General

Attributes	Required	Usage	Default	Options
name	X	Set the camera name for display in the Home app.
manufacturer		Set the manufacturer name for display in the Home app.	Homebridge
serialNumber		Set the serial number for display in the Home app.	SerialNumber
firmwareRevision		Set the firmware revision for display in the Home app.	current plugin version
motion		Exposes the motion sensor for this camera. This can be triggered with dummy switches, MQTT messages, or via HTTP, depending on what features are enabled in the config.	false	true/false
doorbell		Exposes the doorbell device for this camera. This can be triggered with dummy switches, MQTT messages, or via HTTP, depending on what features are enabled in the config.	false	true/false
switches		Enables dummy switches to trigger motion and/or doorbell, if either of those are enabled. When enabled there will be an additional switch that triggers the motion or doorbell event.	false	true/false
motionTimeout		The number of seconds after triggering to reset the motion sensor. Set to 0 to disable resetting of motion trigger for MQTT or HTTP.	1
unbridge		Bridged cameras can cause slowdowns of the entire Homebridge instance. If unbridged, the camera will need to be added to HomeKit manually.	false	true/false

videoConfig

Attributes	Required	Usage	Default	Options
source	x	FFmpeg options on where to find and how to decode your camera's video stream. The most basic form is -i followed by your camera's URL.
stillImageSource		If your camera also provides a URL for a still image, that can be defined here with the same syntax as source. If not set, the plugin will grab one frame from source.
returnAudioTarget		(EXPERIMENTAL - WIP) The FFmpeg output command for directing audio back to a two-way capable camera. This feature is still in development and a configuration that works today may not work in the future.	false	true/false
maxStreams		The maximum number of streams that will be allowed at once to this camera.	2
maxWidth		The maximum width used for video streamed to HomeKit. If set to 0, the resolution of the source is used. If not set, will use any size HomeKit requests.
maxHeight		The maximum height used for video streamed to HomeKit. If set to 0, the resolution of the source is used. If not set, will use any size HomeKit requests.
maxFPS		The maximum frame rate used for video streamed to HomeKit. If set to 0, the framerate of the source is used. If not set, will use any frame rate HomeKit requests.
maxBitrate		The maximum bitrate used for video streamed to HomeKit, in kbit/s. If not set, will use any bitrate HomeKit requests.
forceMax		If set, the settings requested by HomeKit will be overridden with any 'maximum' values defined in this config.	false	true/false
vcodec		Set the codec used for encoding video sent to HomeKit, must be H.264-based. You can change to a hardware accelerated video codec with this option, if one is available.	libx264
audio		Enables audio streaming from camera.	false	true/false
packetSize		If audio or video is choppy try a smaller value, should be set to a multiple of 188.	1316
mapvideo		Selects the stream used for video.	FFmpeg automatically selects a video stream
mapaudio		Selects the stream used for audio.	FFmpeg automatically selects an audio stream
videoFilter		Comma-delimited list of additional video filters for FFmpeg to run on the video. If 'none' is included, the default video filters are disabled.
encoderOptions		Options to be passed to the video encoder.	-preset ultrafast -tune zerolatency
debug		Includes debugging output from the main FFmpeg process in the Homebridge log.	false	true/false
debugReturn		Includes debugging output from the FFmpeg used for return audio in the Homebridge log.	false	true/false

mqtt

Attributes	Required	Usage	Default	Options
motionTopic		The MQTT topic to watch for motion alerts. The topic (prefix/suffix) should be unique, it will be used to assign the motion detected message to the desired camera.
motionMessage		The message to watch for to trigger motion alerts.
motionResetTopic		The MQTT topic to watch for motion resets. The topic (prefix/suffix) should be unique, it will be used to assign the reset motion message to the desired camera.
motionResetMessage		The message to watch for to trigger motion resets.
doorbellTopic		The MQTT topic to watch for doorbell alerts. The topic (prefix/suffix) should be unique, it will be used to assign the doorbell message to the desired camera.
doorbellMessage		The message to watch for to trigger doorbell alerts. Will use the name of the camera if blank.