Mechanical Structure and Mounting
The iCOMOX is composed of the following parts:
- The indication LEDs
- Case
- Cover of the SD and the on/off slide switch
- Gasket
- The cover
- Electronic cards
- Screws to secure the cover
- Screw connecting the electronic card to the pack
The mounting Kit provides a flexible mounting solution of the iCOMOX to the monitored equipment. The Mounting Kit contains an adaptor (item 3) which is secured to the iCOMOX with two screws (item 4). This adaptor has two holes on its sides, which may fit to several motors such as three-phase or Size 63 Induction Motors. For other equipment, a second adaptor (item 1) is supplied with slots instead of holes for more flexibility. If the adaptor (item 3) fits your equipment, then the adaptor (item 1) is not necessary.
If the supplied adaptors do not fit your equipment, you may make an adaptor of your own as per the dimensions of the supplied adaptor in the following figure. The important requirement is to make two holes 73mm apart with a diameter to accommodate M4 screws. For more information/support, please contact [email protected].
Please see Arrow website to purchase.
