odroid

ODROID

The configuration package odroid/common contains common configurations for the Odroid series of boards by HardKernel. There are specific packages for each board/series.

If using the n2 or n2l, set the boot switch to MMC.

Reference:

• https://github.com/tobetter/linux/commits/odroid-5.18.y
• https://github.com/armbian/build/tree/master/patch/kernel/archive/meson64-5.17

Getting Started

Set the comma-separated SKIFF_CONFIG variable:

$ export SKIFF_CONFIG=odroid/n2,skiff/core
$ make configure                   # configure the system
$ make compile                     # build the system

Once the build is complete, we will flash to a MicroSD card to boot. You will need to sudo bash for this on most systems.

$ sudo bash             # switch to root
$ export ODROID_SD=/dev/sdz # make sure this is right! (usually sdb)
$ make cmd/odroid/common/format  # tell skiff to format the device
$ make cmd/odroid/common/install # tell skiff to install the os

You only need to run the format step once. It will create the partition table. The install step will overwrite the current Skiff installation on the card, taking care to not touch any persistent data (from the persist partition). It's safe to upgrade Skiff independently from your persistent data.

Board Compatibility

There are specific packages tuned to each model. The boards are all actively tested by the developers unless otherwise noted.

Board	Config Package	Status
c2	odroid/c2
c4	odroid/c4	Reboot issue
h2 + h2+	odroid/h3	Obsolete
h3 + h3+	odroid/h3	Intel x86
hc2	odroid/xu
hc4	odroid/hc4
m1	odroid/m1
n2	odroid/n2	Includes n2+
n2l	odroid/n2l
u + u2	odroid/u	Obsolete
xu3	odroid/xu	Obsolete
xu4 (+ xu4q)	odroid/xu

SD Card Compatibility

The current SD cards used / tested by developers are:

• PNY Turbo Performance 16GB High Speed MicroSDHC Class 10 UHS-1
• SanDisk 128GB Extreme MicroSDXC UHS-I
• SanDisk 128GB MicroSDXC Nintendo Switch Edition
• SanDisk Ultra MicroSDXC (Any)

The current cards that are known to NOT work are:

• Intenso MicroSDXC Card, UHS-I, 64 GB

Some SD cards may not work as well with the Odroid hardware.

Bootup Process

All Odroid boards use u-boot. U-boot is flashed to the beginning of the SD card, before the first partition. It loads and executes a boot.ini configuration.

Note: there may be some binary bootloader blobs used that are provided by the vendor & signed, and cannot be compiled by Skiff, depending on the board.

Odroid N2 and N2L

If using the n2 or n2l, set the boot switch to MMC.

Odroid HC4

If using the hc4, petitboot must be bypassed.

See the details in the odroid/hc4 docs.

On default, the HC4 boots from SPI, which contains petitboot. If the black button on the bottom of the device (the "boot select" switch) is pressed, the board will use u-boot from the MicroSD card.

Acknowledgments

Thank you to tobetter for patching / testing the latest Linux kernels for the Odroid series of boards.

The Amlogic Linux fork has some additional fixes.

The SkiffOS Linux fork restores support for older boards in newer kernels.