dynamic line of load

[matomatusov]

Is there an existing issue for this?

• I have searched the existing issues

Current Behavior

Hi,
dynamic line width of load is missing in the full version.

Steps To Reproduce

No response

Expected behaviour

correction of the line thickness

Card Version

4.16.1

Home Assistant Version

2024.2.3

Configuration

No response

Relevant log output

No response

[slipx06]

Do you mean the dynamic Line width is not applied to that line?

[matomatusov]

yes exactly like that.

[matomatusov]

Hi,
I think there is a different line thickness.

[slipx06]

Yes the thickness is calculated based on the 2.06kW number i.e. config.entities.grid_power_169

[matomatusov]

Question: when I entered power L1, L2 and L3 for the three-phase converter, I have a large number for Autarky. What could be the error?

Thanks

[slipx06]

There is something odd with your sensor readings:

Battery power is 3790 W supplying a load 3350W and you are exporting 974W to the grid. You are consuming more power than you are producing?

[matomatusov]

If I don't fill in the power L1, L2 and L3, I still don't know what the 6.82 kW is. The consumption of the house is 3.41 kW.

[slipx06]

Can you share your card config?

[matomatusov]

entities:

use_timer_248: input_boolean.sunsynk_use_timer_248
priority_load_243: switch.sunsynk_toggle_priority_load
inverter_voltage_154: sensor.solax_inverter_voltage
inverter_current_164: sensor.solax_inverter_current
load_frequency_192: sensor.solax_inverter_frequency
grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
inverter_status_59: sensor.solax_run_mode
day_battery_charge_70: sensor.solax_battery_input_energy_today
day_battery_discharge_71: sensor.solax_battery_output_energy_today
battery_voltage_183: sensor.solax_battery_voltage_charge
battery_soc_184: sensor.solax_battery_capacity
battery_power_190: sensor.solax_battery_power_charge
battery_current_191: sensor.solax_battery_current_charge
grid_power_169: sensor.solax_house_load
day_grid_import_76: sensor.solax_grid_import
day_grid_export_77: sensor.solax_grid_export
grid_ct_power_172: sensor.solax_measured_power_l1
essential_power: none
nonessential_power: none
aux_power_166: sensor.sunsynk_aux_power
pv1_power_186: sensor.solax_pv_power_1
pv2_power_187: sensor.solax_pv_power_2
pv1_voltage_109: sensor.solax_pv_voltage_1
pv1_current_110: sensor.solax_pv_current_1
pv2_voltage_111: sensor.solax_pv_voltage_2
pv2_current_112: sensor.solax_pv_current_2
day_pv_energy_108: sensor.solax_today_s_solar_energy
environment_temp: sensor.iakovi2_temperature
remaining_solar: sensor.solcast_pv_forecast_forecast_today
total_pv_generation: sensor.solax_total_yield
pv_total: sensor.solax_pv_power_total
battery_temp_182: sensor.solax_battery_temperature
inverter_voltage_L2: sensor.solax_inverter_voltage_l2
inverter_voltage_L3: sensor.solax_inverter_voltage_l3
inverter_current_L2: sensor.solax_inverter_current_l2
inverter_current_L3: sensor.solax_inverter_current_l3
grid_ct_power_L2: sensor.solax_measured_power_l2
grid_ct_power_L3: sensor.solax_measured_power_l3
grid_ct_power_total: sensor.solax_measured_power
grid_voltage: sensor.solax_grid_voltage
energy_cost_buy: sensor.innogy_current_price_czk_kwh
energy_cost_sell: sensor.pce_current_price_czk_kwh
dc_transformer_temp_90: sensor.solax_inverter_temperature
radiator_temp_91: sensor.solax_inverter_outside_temperature
essential_load1: sensor.ambienta_power
essential_load2: sensor.jablotron_futura_coolbreeze_power
day_load_energy_84: sensor.solax_day_load_energy
solar_sell_247: input_boolean.sunsynk_solar_sell_247
load_power_L1: sensor.solax_measured_power_l1
load_power_L2: sensor.solax_measured_power_l2
load_power_L3: sensor.solax_measured_power_l3
inverter_power_175: sensor.solax_inverter_power

[slipx06]

The full config and if you mark as code it will format correctly

[matomatusov]

type: custom:sunsynk-power-flow-card
cardstyle: full
card_height: 410px
show_solar: true
battery:
  show_daily: true
  energy: 22400
  auto_scale: true
  invert_power: true
  animation_speed: 8
  full_capacity: sensor.solax_battery_charge_upper_soc
  colour:
    - 240
    - 98
    - 146
  hide_soc: false
  show_absolute: false
  empty_capacity: 10
  show_remaining_energy: true
  max_power: 5000
  shutdown_soc: sensor.solax_selfuse_discharge_min_soc
  charge_colour:
    - 238
    - 184
    - 34
  dynamic_colour: true
  linear_gradient: true
solar:
  show_daily: true
  mppts: 2
  pv1_name: West
  pv2_name: East
  auto_scale: true
  dynamic_colour: true
  animation_speed: 8
  max_power: 9770
  display_mode: 3
  colour:
    - 238
    - 184
    - 34
load:
  show_daily: true
  dynamic_icon: true
  auto_scale: true
  load1_icon: mdi:water-boiler
  additional_loads: 2
  load2_icon: mdi:heat-pump
  load1_name: Amb.
  load2_name: Futura
  animation_speed: 8
  max_power: 8000
  dynamic_colour: true
  colour:
    - 193
    - 103
    - 190
  show_aux: false
  essential_name: House
  show_daily_aux: false
grid:
  show_daily_buy: true
  show_daily_sell: true
  show_nonessential: false
  auto_scale: true
  invert_grid: true
  dynamic_colour: true
  export_colour:
    - 17
    - 165
    - 228
  colour:
    - 227
    - 104
    - 28
  animation_speed: 8
  max_power: 8000
  no_grid_colour:
    - 253
    - 252
    - 252
  energy_cost_decimals: 2
  grid_off_colour:
    - 182
    - 62
    - 80
entities:
  use_timer_248: input_boolean.sunsynk_use_timer_248
  priority_load_243: switch.sunsynk_toggle_priority_load
  inverter_voltage_154: sensor.solax_inverter_voltage
  inverter_current_164: sensor.solax_inverter_current
  load_frequency_192: sensor.solax_inverter_frequency
  grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
  inverter_status_59: sensor.solax_run_mode
  day_battery_charge_70: sensor.solax_battery_input_energy_today
  day_battery_discharge_71: sensor.solax_battery_output_energy_today
  battery_voltage_183: sensor.solax_battery_voltage_charge
  battery_soc_184: sensor.solax_battery_capacity
  battery_power_190: sensor.solax_battery_power_charge
  battery_current_191: sensor.solax_battery_current_charge
  grid_power_169: sensor.solax_house_load
  day_grid_import_76: sensor.solax_grid_import
  day_grid_export_77: sensor.solax_grid_export
  grid_ct_power_172: sensor.solax_measured_power
  essential_power: none
  nonessential_power: none
  aux_power_166: sensor.sunsynk_aux_power
  pv1_power_186: sensor.solax_pv_power_1
  pv2_power_187: sensor.solax_pv_power_2
  pv1_voltage_109: sensor.solax_pv_voltage_1
  pv1_current_110: sensor.solax_pv_current_1
  pv2_voltage_111: sensor.solax_pv_voltage_2
  pv2_current_112: sensor.solax_pv_current_2
  day_pv_energy_108: sensor.solax_today_s_solar_energy
  environment_temp: sensor.iakovi2_temperature
  remaining_solar: sensor.solcast_pv_forecast_forecast_today
  total_pv_generation: sensor.solax_total_yield
  pv_total: sensor.solax_pv_power_total
  battery_temp_182: sensor.solax_battery_temperature
  inverter_voltage_L2: sensor.solax_inverter_voltage_l2
  inverter_voltage_L3: sensor.solax_inverter_voltage_l3
  inverter_current_L2: sensor.solax_inverter_current_l2
  inverter_current_L3: sensor.solax_inverter_current_l3
  grid_ct_power_L2: sensor.solax_measured_power_l2
  grid_ct_power_L3: sensor.solax_measured_power_l3
  grid_ct_power_total: sensor.solax_measured_power
  grid_voltage: sensor.solax_grid_voltage
  energy_cost_buy: sensor.innogy_current_price_czk_kwh
  energy_cost_sell: sensor.pce_current_price_czk_kwh
  dc_transformer_temp_90: sensor.solax_inverter_temperature
  radiator_temp_91: sensor.solax_inverter_outside_temperature
  essential_load1: sensor.ambienta_power
  essential_load2: sensor.jablotron_futura_coolbreeze_power
  day_load_energy_84: sensor.solax_day_load_energy
  solar_sell_247: input_boolean.sunsynk_solar_sell_247
  load_power_L1: sensor.solax_measured_power_l1
  load_power_L2: sensor.solax_measured_power_l2
  load_power_L3: sensor.solax_measured_power_l3
  inverter_power_175: sensor.solax_inverter_power
large_font: true
panel_mode: false
show_battery: true
show_grid: true
inverter:
  model: solax
  three_phase: true
  auto_scale: true
  modern: false
  autarky: power
  colour:
    - 244
    - 241
    - 236
decimal_places: 2
dynamic_line_width: true
max_line_width: 5

[otava5]

Kde se dá najít tato entita "sensor.solax_day_load_energy"? Díky

[matomatusov]

Tá sa nedá nájsť. Urobil som si ju z viacero entít.

[otava5]

a měl by jsi aktuální yaml trochu tápu kam jaké entity dát?

[matomatusov]

Je priložený hore. Musíš si to prispôsobiť k svojim entitám.

[slipx06]

Ok. I found an issue with that formula. I will push a fix. If you have three_phase: true and you do not provide a sensor for essential_power then it should use the formula essential_power = load_power_L1 + load_power_L2 + load_power_L3
There was a problem with the logic so it was using the single phase formula (inverter_power_175 + grid_power_169 - aux_power)

If you have a sensor that measures essential_power then you can explicitly define it in the config i.e. essential_power: sensor.solax_house_load

[matomatusov]

I have the house load at the marked location.
grid_power_169: sensor.solax_house_load

[slipx06]

I've corrected in 14.6.5.

aux_power_166: sensor.sunsynk_aux_power <-------- delete this sensor if not used
full_capacity: sensor.solax_battery_charge_upper_soc <------------- delete this it is no longer used
empty_capacity: 10 <-----------delete this it is no longer used

Its not correct to use the same sensors for grid and load

grid_ct_power_L2: sensor.solax_measured_power_l2
grid_ct_power_L3: sensor.solax_measured_power_l3
grid_ct_power_total: sensor.solax_measured_power
load_power_L1: sensor.solax_measured_power_l1
load_power_L2: sensor.solax_measured_power_l2
load_power_L3: sensor.solax_measured_power_l3

These should be different measurement points.

[matomatusov]

Then probably like this:

grid_ct_power_L2: sensor.solax_measured_power_l2
grid_ct_power_L3: sensor.solax_measured_power_l3
grid_ct_power_total: sensor.solax_measured_power
load_power_L1: sensor.solax_power_l1
load_power_L2: sensor.solax_power_l2
load_power_L3: sensor.solax_power_l3

[matomatusov]

@slipx06
Hi,
I uploaded your file and refreshed the site, but I still have version 4.20.1. I miss it there b. I don't know where the error could be.

[slipx06]

It's using a cached version. You need to empty cache and hard reload or try a different browser or use incognito mode

[matomatusov]

I opened it in incognito mode and it's sure.

[slipx06]

Its still loading from cache. You need to empty your cache

[matomatusov]

Hi, is there any way to fix it?
This happens when the battery is not charging or discharging.

[otava5]

I also didn't understand what these 2 values mean...

[slipx06]

Hi I will take another look. It could be due to your battery power = 0. This is strange because there should always be some power and current registered on the battery sensor, even when the battery is floating.

Did you get the dubug logs working. I need this data to assist you.

[matomatusov]

I don't know how to get the data you need. Can you direct me somehow?

[slipx06]

PLease test with this dev version. sunsynk-power-flow-card-dev.zip
Download and unzip the file. Copy the sunsynk-power-flow-card-dev.js file to your /config/www directory.

Then add the following dashboard resource

The open a new browser and add the card to your dashboard. You need to switch to code editor and change the card name to type: custom:sunsynk-power-flow-card-dev You can then hit F12 to bring up the console logs to show the debug data

[matomatusov]

Is this the problem?

[slipx06]

It means that your sensor that you are using for day_battery_discharge_71 logged an undefined state. It does not seem to be repeating so maybe an intermittent issue with your integration

[slipx06]

Please share these logs

[matomatusov]

I am sending a txt file

sunsynk-power-flow-card-dev.jsver=4.txt

[slipx06]

Thanks I found the problem. nonessential power should never be negative.

[matomatusov]

great and thank you for your help.

[slipx06]

Please test https://github.com/slipx06/sunsynk-power-flow-card/releases/tag/v4.30.0

[matomatusov]

Hi,
The given problem has been removed. Thanks for the great work.

[slipx06]

What is the correct translation for "Limit" ?

[matomatusov]

in SK - „Limit“ - Slovakia
in CZ - „omezení“ - Czech Republic

Wouldn't it be better to call it Export Control ?

[slipx06]

I want to keep it short so used "Limit" instead of "Export Limit" or "Export Control"