-
-
Notifications
You must be signed in to change notification settings - Fork 37
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Zone control reporting into HA incorrect #327
Comments
Could you enable debug logging while performing the toggle action and until it reverts to off. |
Log here.. First toggle is of the one working zone timestamped at 17:50 Then 17:51 and 52 are the zones that I toggled, one I only toggled once, and as the zone was off (showing on) it stayed off but HA button returned to on. The one at 17:52 I toggled on, And it turned the zone on, but button reverted to off. |
Same issue here @sockless-coding - when controlling the zone from HA (i.e. turn off the zone) it actually does the action and in the Panasonic App it turns the zone off, but then HA reverts the switch and shows as ON even though the zone is OFF in the Panasonic App. Hope that makes sense. |
Hi @sockless-coding, I'm also experiencing the same issue. toggling in HA for each zone does turn on/off the zone but then a few seconds later it visually reverts in HA but remains the correct state on the panasonic app. After a few hours it will visually be correct but can be a bit confusing when I think I've turned on/off a zone and then it reverts but it actually did the action. This was working correctly when the zone control was added a few months ago. Let me know what debug logs you require. |
Checklist
What version of Home Assistant Core?
core-2024.10.3
Describe the issue
Using a zoned Panasonic Ducted system with Comfort Cloud. 2 of the zone controls on HA work correctly, however the other 3 when toggled on, will toggle the zones on, but the button in HA reverts to off after a few seconds (even though the zone remains on). This also means that I cant use HA to toggle to zone off once its on. Everything else works correctly, just these 3 zones done toggle and report correctly. In the logs I can see the zone turn on, then it reports turning off by itself, but the zone remains on
Error/Debug Logs
No response
The text was updated successfully, but these errors were encountered: