27c160

[Indibilio]

Hello! How i can use a 27c160 EEPROM whit this cartridge? Which modifications it needs?

Thanks.

[soniccd123]

Hello! Yes it should work, just put turn A20 off in the switch (switch photo with A20 marked for reference is attached to this message), this will garantee that the 27C160 Byte pin is high, setting it to 16bit mode and will disconnect this pin from the Genesis Cart bus.

[Indibilio]

Thanks for the reply. I thought I had to cut a track. So I turn OFF that switch in that position, and the cartridge already works with EEPROM 27c160 and lower.

Great job!!!

[Indibilio]

Hello. Another question. The FM1808 is discontinued and its price is increased.

It is possible to use another equivalent fram? Or if i don't use the 3 top switch to use another memory banks, it is possible to use a small fram memory type? Only one game - one save bank.

Thanks!!!!☺️☺️

[soniccd123]

Yes, you can use a equivalent as long as it is pin compatible and 5V tolerant. I personally use the FM18W08 which is mostly identical and is widely available.

You can also use a smaller FeRAM if you want, but need to check if it is pin compatible, I don't really have any chips to recommend, but they surely exist.

[Indibilio]

Thanks.

It is dificult to modiffy this pcb to allow two 27c322 and put the rom of "Pier Solar" inside? Using the mapper to play a game with 64mb with save feature. This game is sold out, not disponible, and dificult to play into a real hardware.

[soniccd123]

Hey! Sorry for the making you wait so much, life got in the way and its been some time i didn't check my github.

Well, it is perfectly possible if you can implement the mapper. I really don't know much about how Pier Solar maps the 64Mb, is it a SSF mapper? Really depends on how much space the circutry takes, but should be doable.

[Indibilio]

I think it will be complicated, I don't know how the Pier Solar mapper works, I only have a slight knowledge of electronics. I thought that using two 27c322s together with a traditional mapper could be done. The Chinese on Aliexpress do it, but I don't know how.

Courage, life sometimes gets difficult, but don't forget to live !!!

[PicoElements]

Hi! I love this project! I'm trying to make it work with a 27c160 and i saw the first comment so very helpful! All the switches on but the A20. Cn it work without the FM18W08 ? Is there a way not to use it? It's really hard to find.
Thanks a lot!

[Indibilio]

You can find the FM18W08 or FM1808 from Aliexpress....