Time to remember Mr. Miyagi’s lesson.
This step will be used every time you need to run Factom Federation software, so get familiar with it. Practice makes perfect. Wax on, wax off.
Every time you come across “Run FF” you need to perform the following steps. These are the necessary steps to run the wallet.
For Mac and Windows, use the cd command with Terminal to browse to the location of your FF installation. On Linux, you will be able to run commands without having to browse the to install location.
This step is required before you run factomd, factom-walletd, and factom-cli. The three applications are required to run the Factom Federation software.
In a new Terminal window, run
Mac
cd /Applications/Factom/
Windows
cd C:\Program Files (x86)\Factom\
On Mac, Windows and Linux, run “factomd” first
factomd
Then browse to http://localhost:8090 to see the Control Panel for your local FF node.
Syncing the Factom blockchain may take a little while. The Factom Control panel will display the progress and notify you when it has finished syncing. This will also occur when it has been a while since the last time you have run factomd. However, after the first full sync is complete, successive syncs are faster and you will only have to sync blocks since the last full sync.
Once you are synced, in a new Terminal window browse (cd) to the location of your FF installation as you did above (Mac and Windows only).
There are two options now, one for people who have run Factom Genesis (FG), our previous software release, and one for people who haven’t. The former has to import their old FG wallet file; the latter doesn’t. Choose the next step accordingly.
If you have run our previous software release “Factom Genesis (FG)” you need to import your FG wallet file (named factoid_wallet_bolt.db) the first time your run factom-walletd to make sure all its previous addresses and balances are transferred over. You have learned how to backup your wallet file in our Backup Your Wallet File! guide and you should know if still in the default location within the .factom folder at ~/.factom/factoid_wallet_bolt.db.
Simply run the next command with a special flag and the path to your wallet file:
factom-walletd -i=PATH_TO_YOUR_FGWALLETFILE.
For example, if your FG wallet file is still in the .factom folder, run:
factom-walletd -i=~/.factom/factoid_wallet_bolt.db
This command will tell factom-walletd to look for the file at the specified path and import all its addresses into the new wallet. The file can be located in a different location on your hard drive, just make sure to specify the path properly.
If by any chance the operation fails, quit factom-walletd, delete the new wallet file located at ~/.factom/wallet/factoid_wallet.db and try again until you get all your addresses back.
Remember, you only need to do this once the first time you run factom-walletd, after that you can run it normally.
Run:
factom-walletd
Terminal output for:
factom-walletd
> factom-walletd
Reading from '/Home/.factom/m2/factomd.conf'
Cannot open custom config file,
Starting with default settings.
open /Home/.factom/m2/factomd.conf: no such file or directory
Reading from '/Home/.factom/m2/factomd.conf'
Cannot open custom config file,
Starting with default settings.
open /Home/.factom/m2/factomd.conf: no such file or directory
Warning, factom-walletd API is not password protected. Factoids can be stolen remotely.
Warning, factom-walletd API connection is unencrypted. The password is unprotected over the network.
Database started from: /Home/.factom/wallet/factom_wallet.db
Database started from: /Home/.factom/wallet/factoid_blocks.cache
2016/11/24 06:28:37 web.go serving :8089
You are now ready to use factom-cli to run commands in your third Terminal window. Run the command -h (help) to see all the available commands and their descriptions. cd to the location of your FF installation first, then run:
factom-cli -h
Terminal output for:
factom-cli -h
> factom-cli -h
Usage of ./factom-cli:
-factomdcert string
This file is the TLS certificate provided by the factomd API. (default ~/.factom/m2/factomdAPIpub.cert)
-factomdpassword string
Password for API connections to factomd
-factomdtls
Set to true when the factomd API is encrypted
-factomduser string
Username for API connections to factomd
-h help
-s string
IPAddr:port# of factomd API to use to access blockchain (default localhost:8088)
-test.bench string
regular expression per path component to select benchmarks to run
-test.benchmem
print memory allocations for benchmarks
-test.benchtime duration
approximate run time for each benchmark (default 1s)
-test.blockprofile string
write a goroutine blocking profile to the named file after execution
-test.blockprofilerate int
if >= 0, calls runtime.SetBlockProfileRate() (default 1)
-test.count n
run tests and benchmarks n times (default 1)
-test.coverprofile string
write a coverage profile to the named file after execution
-test.cpu string
comma-separated list of the number of CPUs to use for each test
-test.cpuprofile string
write a CPU profile to the named file during execution
-test.memprofile string
write a memory profile to the named file after execution
-test.memprofilerate int
if >=0, sets runtime.MemProfileRate
-test.outputdir string
directory in which to write profiles
-test.parallel int
maximum test parallelism (default 8)
-test.run string
regular expression to select tests and examples to run
-test.short
run smaller test suite to save time
-test.timeout duration
if positive, sets an aggregate time limit for all tests
-test.trace string
write an execution trace to the named file after execution
-test.v
verbose: print additional output
-w string
IPAddr:port# of factom-walletd API to use to create transactions (default localhost:8089)
-walletcert string
This file is the TLS certificate provided by the factom-walletd API. (default ~/.factom/walletAPIpub.cert)
-walletpassword string
Password for API connections to factom-walletd
-wallettls
Set to true when the wallet API is encrypted
-walletuser string
Username for API connections to factom-walletd
factom-cli ack TxID|FullTx
Returns information about a factoid transaction, or an entry / entry credit transaction
factom-cli addchain [-e EXTID1 -e EXTID2 -E BINEXTID3 ...] ECADDRESS <STDIN>
Create a new Factom Chain. Read data for the First Entry from stdin. Use the Entry Credits from the specified address.
factom-cli addentry -c CHAINID [-e EXTID1 -e EXTID2 -E BEEF1D ...] ECADDRESS <STDIN>
Create a new Factom Entry. Read data for the Entry from stdin. Use the Entry Credits from the specified address.
factom-cli addtxecoutput [-r] TXNAME ADDRESS AMOUNT
Add an Entry Credit output to a transaction in the wallet
factom-cli addtxfee TXNAME ADDRESS
Add the transaction fee to an input of a transaction in the wallet
factom-cli addtxinput TXNAME ADDRESS AMOUNT
Add a Factoid input to a transaction in the wallet
factom-cli addtxoutput [-r] TXNAME ADDRESS AMOUNT
Add a Factoid output to a transaction in the wallet
factom-cli backupwallet
Backup the running wallet
factom-cli balance [-r] ADDRESS
If this is an EC Address, returns the number of Entry Credits. If this is a Factoid Address, returns the Factoid balance.
factom-cli buyec FCTADDRESS ECADDRESS ECAMOUNT
Buy entry credits
factom-cli composechain [-e EXTID1 -e EXTID2 -E BINEXTID3 ...] ECADDRESS <STDIN>
Create API calls to create a new Factom Chain. Read data for the First Entry from stdin. Use the Entry Credits from the specified address.
factom-cli composeentry -c CHAINID [-e EXTID1 -e EXTID2 -E BEEF1D ...] ECADDRESS <STDIN>
Create API calls to create a new Factom Entry. Read data for the Entry from stdin. Use the Entry Credits from the specified address.
factom-cli composetx TXNAME
Compose a wallet transaction into a JSON RPC object
factom-cli ecrate
It takes this many Factoids to buy an Entry Credit. Displays the larger between current and future rates. Also used to set Factoid fees.
factom-cli exportaddresses
List the private addresses stored in the wallet
factom-cli get allentries|chainhead|dblock|eblock|entry|firstentry|head|heights
Get data about Factom Chains, Entries, and Blocks
factom-cli get allentries [-n NAME1 -N HEXNAME2 ...] CHAINID
Get all of the Entries in a Chain
factom-cli get chainhead [-n NAME1 -N HEXNAME2 ...] CHAINID
Get ebhead by chainid
factom-cli get dblock KEYMR
Get dblock contents by merkle root
factom-cli get eblock KEYMR
Get eblock by merkle root
factom-cli get entry HASH
Get entry by hash
factom-cli get firstentry [-n NAME1 -N HEXNAME2 ...] CHAINID
Get the first entry from a chain
factom-cli get head
Get the latest completed directory block
factom-cli get heights
Get the current heights of various blocks in factomd
factom-cli importaddress ADDRESS [ADDRESS...]
Import one or more secret keys into the wallet
factom-cli importwords '12WORDS'
Import 12 words from Koinify sale into the Wallet
factom-cli listaddresses
List the addresses stored in the wallet
factom-cli listtxs [tmp|all|address|id|range]
List transactions from the wallet or the Factoid Chain
factom-cli listtxs address ECADDRESS|FCTADDRESS
List transactions from the Factoid Chain with a particular address
factom-cli listtxs [all]
List all transactions from the Factoid Chain
factom-cli listtxs id TXID
List transaction from the Factoid Chain
factom-cli listtxs range START END
List the transactions from the Factoid Chain within the specified range
factom-cli listtxs tmp
List current working transactions in the wallet
factom-cli newecaddress
Generate a new Entry Credit Address in the wallet
factom-cli newfctaddress
Generate a new Factoid Address in the wallet
factom-cli newtx TXNAME
Create a new transaction in the wallet
factom-cli properties
Get version information about facotmd and the factom wallet
factom-cli receipt ENTRYHASH
Returns a Receipt for a given Entry
factom-cli rmtx TXNAME
Remove a transaction in the wallet
factom-cli sendfct FROMADDRESS TOADDRESS AMOUNT
Send Factoids between 2 addresses
factom-cli sendtx TXNAME
Send a Transaction to Factom
factom-cli signtx TXNAME
Sign a transaction in the wallet
factom-cli subtxfee TXNAME ADDRESS
Subtract the transaction fee from an output of a transaction in the wallet