Changing the assigned PRBs to the UE does not reflect on the uplink throughput

[alirezalab134]

Hi,
I followed this tutorial to setup a one UE xApp scenario. Instead of the "kpm_mon_xapp.py" I ran "simple_rc_xapp.py". The changes in the PRB allocation reflect on the Downlink traffic as you can see, but not on the uplink. I generate Uplink traffic using Iperf. Would you please help me figure out what is the problem?

[pgawlowicz]

Currently, the PRB limits are applied only to PDSCH.

[alirezalab134]

I see. Thanks.
Another question which is related to this topic. When I generate traffic using iPerf with very high bandwidth, I see the output of iPerf matching that bandwidth and sending that amount of data however the bandwidth I see on Grafana is limited to 33Mbit/sec and the transmission continues even after iPerf finishes sending, until it transmits the amount of data that iPerf generated originally. To me it seems like the iPerf is sending the data to a buffer and then the buffer sends it to the channel. If that's the case is there any alternative to iPerf so I can generate the traffic and see the result in real time rather than going through a buffer?