Skip to content

Latest commit

 

History

History
158 lines (121 loc) · 8.92 KB

CHANGELOG.md

File metadata and controls

158 lines (121 loc) · 8.92 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

Release 0.0.5 - unreleased

Documentation

  • Add page to document inverter bitfields and enumerations.
  • Add more fault codes and a warning that the added codes overflow the bitfield.
  • Update description for battery.bat_status in the App mapping after RCT added a proper name to it, also add a description to the field in the Registry.

Release 0.0.4 - 2023-10-05

Documentation

  • Add a page showing the overview screens of the RCT Power app and which OIDs are used to display the values.
  • Mention that some behaviours and the entire content of the registry is an implementation detail of the vendor and are not mandated by the protocol itself and as such may not apply to other implementations.
  • New page Faults for interpreting the fault[*].flt responses in RCT devices.
  • Split documentation by moving the vendor-specific (aka RCT Inverter) parts to their own section (Registry, Faults and App mapping).
  • Protocol overview:
    • Add section about lack of protocol-level error handling.
    • Add note about EXTENSION commands, their structure is unknown.
    • Document what is known about READ_PERIODICALLY and how it is supposed to work with vendor devices.
    • Mention checksum algorithm.
    • List all known commands as well as reserved ones.
    • Describe plant communication, which has not been tested yet.
  • CLI invocation: Bash-completion activation changed with newer versions of Click.
  • CLI: Document why there is now write support in the CLI.

Features

  • Command has new functions is_write and is_response to help working with received frames.
  • Command learned about READ_PERIODICALLY, but it has not been tested yet.
  • Command learned about the PLANT_ equivalents of the other commands.

Bugfixes

  • CLI: Implement support for Click 8.1 caused by API changes related to custom completions (Issue #17, PR #18).
  • Make setuptools happy again by adhering to PEP-508.

Dependency changes

  • Click: Version 7.0 is the new minimum, it supported custom completion functions for the first time
  • Click: Version 8.1 is the new maximum, to guard against API changes during unconditionally updating the dependencies.

Release 0.0.3 - 2021-05-22

Breaking changes

Receiving of frames has been completely reworked

It now uses a streaming approach where parts are decoded (almost) as soon as they are received instead of waiting for the entire frame to be received. This was done in order to allow for more flexible handling. The correctness of the data still cannot be determined before the entire frame has been received and the CRC16 checksum indicating correct reception.

Except for invalid or unsupported (EXTENSION) commands, which will raise an exception and abort consumption, the properties of ReceiveFrame are now populated as soon as possible and no longer raise an exception when accessed before the frame is complete().

Rationale: The main use case is the detection and handling of frames with invalid length field. As the correctness of the frame could previously only be determined after it the advertised amount of data was received, frames that advertise an abnormal amount of data consumed tens or hundreds of valid frames with no way for the application to determine what was wrong. With the change, the application can now check for command and length, and abort the frame if it seems reasonable. For example when it detects that a frame that carries a DataType.UINT8 field wants to consume 100 bytes, which is far larger than what is needed to transport such a small type, it can abort the frame and skip past the beginning of the broken frame, as an alternative to keeping track of buffer contents over multiple TCP packets, in order to loop back once it is clear that the current frame is broken.

The exception FrameNotComplete was removed as it was not used any more, and InvalidCommand was added in its place. Furthermore, if the parser detects that it overshot (which hints at a programming error), it raises FrameLengthExceeded, enabling calling code to abort the frame.

Known issues

  • Time stamps in the output of tool timeseries2csv.py are off by one or two (during DST) hours.

Features

  • Registry: Update with new OIDs from OpenWB.
  • Tool read_pcap.py now makes an attempt to decode frames that are complete but have an incorrect checksum to try to give a better insight into what's going on.
  • Tool read_pcap.py prints the time stamp encoded in the dump with each packet.
  • ReceiveFrame: Add a flag to allow decoding the content of a frame even if the CRC checksum does not match. This is intended as a debug measure and not to be used in normal operation.
  • Added type hints for decode_value and encode_value. Requires typing_extensions for Python version 3.7 and below.
  • Mention that tool csv2influx.py is written with InfluxDB version 1.x in mind (Issue #10).
  • Debugging ReceiveFrame now happens using the Python logging framework, using the rctclient.frame.ReceiveFrame logger, the debug() method has been removed.
  • New CLI flag --frame-debug, which enables debug output for frame parsing if --debug is set as well.
  • Tool timeseries2csv.py can now output different header formats (none, the original header, and InfluxDB 2.x compatible headers). The command line switch --no-headers was replaced by --header-format.

Documentation

Bugfixes

  • CLI: Fix incomplete example in read-value help output (Issue #5).
  • CLI: Change output for OIDs of type UNKNOWN to a hexdump. This works around the problem of some of them being marked as being strings when instead they carry complex data that can't easily be represented as textual data.
  • Registry: Mark some OIDs that are known to contain complex data that hasn't been decoded yet as being of type UNKNOWN instead of STRING. Most of them cannot be decoded to a valid string most of the time, and even then the content would not make sense. This change allows users to filter these out, e.g. when printing their content.
  • Simulator: If multiple requests were sent in the same TCP packet, the simulator returned the answer for the first frame that it got for all of the requests in the buffer.
  • Tool read_pcap.py now drops a frame if it ran over the segment boundary (next TCP packet) if the new segment looks like it starts with a new frame (0x002b). This way invalid frames with very high length fields are caught earlier, only losing the rest of the segment instead of consuming potentially hundreds of frames only to error out on CRC-check.
  • Tool csv2influx.py had a wrong --resolution parameter set. It has been adapted to the one used in timeseries2csv.py. Note that the table name is made up from the parameters value and changes with it (Issue #8).
  • ReceiveFrame used to extract the address in plant frames at the wrong point in the buffer, effectively swapping address and OID (PR #11).

Release 0.0.2 - 2021-02-17

Features

  • New tool timeseries2csv.py: Reads time series data from the device and outputs CSV data for other tools to consume.
  • New tool csv2influx.py: Takes a CSV generated from timeseries2csv.py and writes it to an InfluxDB database.
  • Refactored frame generation: The raw byte-stream generation for sending a frame was factored out of class SendFrame and put into its own function make_frame. Internally, SendFrame calls make_frame.
  • CLI: Implement simple handling of time series data. The data is returned as a CSV table and the start timestamp is always the current time.
  • CLI: Implement simple handling of the event table. The data is returned as a CSV table and the start timestamp is always the current time. The data is printed as hexadecimal strings, as the meaning of most of the types is now known yet.
  • Registry: Add handling of enum value mappings.
  • Tool read_pcap.py: learned to output enum values as text (from mapping in Registry).
  • Setup: The rctclient CLI is only installed if the cli dependencies are installed.
  • Tests: Some unit-tests were added for the encoding and decoding of frames.
  • Tests: Travis was set up to run the unit-tests.

Documentation

  • New tools timeseries2csv.py and csv2influx.py added.
  • Enum-mappings were added to the Registry documentation.
  • Event table: document recent findings.
  • Protocol: documentation of the basic protocol has been enhanced.
  • Added this changelog file and wired it into the documentation generation.

Bugfixes

  • Encoding/Decoding: ENUM data types are now correctly encoded/decoded the same as UINT8.
  • Simulator: Fix mocking of BOOL and STRING.

Release 0.0.1 - 2020-10-07

Initial release.