Power limit Icon after flashing latest Firmware

[Tommot70]

I uploaded latest firmware via OTA and realized the new icon top right corner, showing a 150% limit, but not able to find where this limit is set ?

[tbnobody]

As mentioned here:

OpenDTU/README.md

Line 26 in 7dc0123

* Show current inverter limit (setting the limit is not yet implemented)

setting the limit is not yet implemented. I am currently working on it.

Interesting is your limit of 150%. Did you use any other software / hardware to setup this value? What inverter model are you using

[tbnobody]

To be honest, my current focus is on implementing the RF communication with the inverter. I currently don't see any RS485 or modbus interface. Zero injection can easyly achieved with a second ESP connected to the electricity meter as shown at your link. There are already projects which read the settings from this devices and are controlable via mqtt. At least there exist arduino libraries for these meters.

[B00gieman]

Ok. Thanks for your hard work.

[Tommot70]

Hello all, setting the limit is now implemented. Just press the red button and look into the dialog.

hM, great work to get this build, BUT I dont see any change on my site ? Firmware version shown is 0.1.21?? There is no additional dialog ?

[tbnobody]

Did you refresh the web page (Maybe use CTRL+F5). Then click on the Live View the already known button to show the limit settings...

[B00gieman]

Hello. Version 0.1.21.
I see the limit...but is it possible to Change it?

[B00gieman]

[tbnobody]

What's your git hash shown in Info --> System?

[B00gieman]

9a44324

[tbnobody]

This Version if 15 days old... you should upgrade to the latest version

[B00gieman]

Updated to Git hash a59dba2

Its working. 😁