Problem with XL710-QDA2

[paunadeu]

There was a problem finding data.
eeprom =
enp132s0f0.eeprom.tar.gz

Output of:
./mytool 0 0x8000
http://paste.ubuntu.com/p/MWnB6fshNr/

NIC is: XL710-QDA2 (0x1583)

I don't understand how can I find phy0_offset

Any help will be apreciated.

[bibigon812]

Hi, I'll look at it.

[bibigon812]

@paunadeu Hi. Could you give me the lspci output with your card?

[paunadeu]

T X 13/07:19:51 0 0.0/40 root@ubuntu:~ # lspci | grep 40
84:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 01)
84:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 01)

T X 13/07:19:54 0 0.0/40 root@ubuntu:~ # lspci -n |grep 84:00
84:00.0 0200: 8086:1583 (rev 01)
84:00.1 0200: 8086:1583 (rev 01)

[lamcheg]

Hi.
Have same problem with my XL710-QDA2.
lspci output:

root@test# lspci | grep QSFP
04:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
04:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
04:00.2 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
04:00.3 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)
root@test# lspci -n | grep 04:00
04:00.0 0200: 8086:1583 (rev 02)
04:00.1 0200: 8086:1583 (rev 02)
04:00.2 0200: 8086:1583 (rev 02)
04:00.3 0200: 8086:1583 (rev 02)

./mytool 0 0x8000 output: mytool-eeprom-dump.txt.gz

ethtool --eeprom-dump eth1 output: my-xl710-qda2-eeprom.dump.gz

Any help will be apreciated.

[lamcheg]

Problem resolved by uploading Intel firmware into QSFP+ module. No card manipulations was needed.

[terrancewong]

Problem resolved by uploading Intel firmware into QSFP+ module. No card manipulations was needed.

WHAT? How to do that?
I have XL710-QDA1 [8086:1584], and Finisar QSFP-40G-SR4 modiles.

[terrancewong]

OK, I found another fork, easier to use https://github.com/bibigon812/xl710-unlocker