Skip to content
This repository has been archived by the owner on Nov 22, 2021. It is now read-only.

Staypuft Fencing Options

Arthur Berezin edited this page Jul 3, 2014 · 5 revisions

To fully support HA of the controller nodes, a fencing machining has to be configured.
Following document outlines all fencing options

[ X ] Enable Power Management
IP Address:____________ [Validation: IP Address ###.###.###.### , Mandatory]
Username:______________ [Validation: String, Optional]
Password:______________ [Validation: String, Chars not shown, Optional]

Power Management Type: [Dropdown list]
(*)IPMILAN {Default}
> Options:______________ [Validation: String, Optional]

( )Bladecenter
> Slot:__________________ [Validation: Numeric ###, Mandatory]
> SSH Port:______________ [Validation: Numeric ###, Optional]
> Options:_______________ [Validation: String, Optional]

( )Cisco UCS
> Slot:__________________ [Validation: Numeric ###, Mandatory]
> Options:_______________ [Validation: String, Optional]

( )ILO4
> Options:_______________[Validation: String, Optional]

( )DRAC7
> Options:_______________[Validation: String, Optional]

( )RSA
> SSH Port:______________[Validation: Numeric ###, Mandatory]
> Options:_______________[Validation: String, Optional]

Clone this wiki locally