Harden APL/GLK hardware support #87

plbossart · 2018-08-15T19:06:57Z

The current driver does not implement all the recommended hardware setups

1. firmware download needs to be retried
2. [APL][GLK] harden: power-gating and clock gating needs to be disabled during firmware download #776 power-gating and clock gating needs to be disabled during firmware download
3. some bits are not reprogrammed on resume
4. watchdog and recovery needed
5. [APL][GLK] harden: delays after programming registers (and/or loops to check status changes) #777 delays after programming registers (and/or loops to check status changes)
6. [APL][GLK] harden: set I2S as slave before enabling DSP #778 set I2S as slave before enabling DSP
7. avoid DMA resume capability on capture

Adding a blanket bug to cover all these improvements. Filed as a bug since the current code is not robust enough.

mengdonglin · 2018-09-18T07:48:56Z

This is an enhancement, so change label from bug to 'enhancement', still P2 to get attention.

pppoe_rcv() needs to look back at the Ethernet header in order to lookup the PPPoE session. Therefore we need to ensure that the mac header is big enough to contain an Ethernet header. Otherwise eth_hdr(skb)->h_source might access invalid data. ================================================================== BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline] BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline] BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 __get_item drivers/net/ppp/pppoe.c:172 [inline] get_item drivers/net/ppp/pppoe.c:236 [inline] pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4447c9 RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9 RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004 RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 tun_alloc_skb drivers/net/tun.c:1532 [inline] tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== Fixes: 224cf5a ("ppp: Move the PPP drivers") Reported-by: [email protected] Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>

the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efa ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: [email protected] Tested-by: Alexander Potapenko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Signed-off-by: Phil Elwell <[email protected]> suppress spurious messages Add #if for 3.14 kernel change (thesofproject#87) Fixes compiling after changes in torvalds@f663dd9 and torvalds@99932d4 Fixes thesofproject#86 Set dev_type to wlan Fixes thesofproject#23 Tentatively added support for more 8188CUS based devices. Add support for more 8188CUS and 8192CUS devices Add ProductId for the Netgear N150 - WNA1000M Fixes CONFIG_CONCURRENT_MODE CONFIG_MULTI_VIR_IFACES Fixes compatibility with 3.13 Enables warning in the compiler and fixes some issues, reference => https://github.com/diederikdehaas/rtl8812AU Starts device in station mode instead of monitor, fixes NetworkManager issues Enable cfg80211 support Fix cfg80211 for kernel >= 4.7 Fixes rtl8192cu for kernel >= 4.8 rtl8192: Fixup build fixup: rtl8192cu fixes from milhouse rtl8192: switch to netdev->priv_destructor() When trying to build from the rpi-4.11.y branch, I'm getting the following error : drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c:3464:10: error: 'struct net_device' has no member named 'destructor' It seems to occur since this upstream commit : torvalds@cf124db [...] netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Signed-off-by: Bilal Amarni <[email protected]> ARM64: Fix build break for RTL8187/RTL8192CU wifi These drivers use an ASM function from the base system to compute the ipv6 checksum. These functions are not available on ARM64, probably because nobody has bother to write them. The base system does have a generic "C" version, so a simple fix is to include the header to use the generic version on ARM64 only. A longer term solution would be to submit the necessary ASM function to the upstream source. With this change, these drivers now compile without any errors on ARM64. Signed-off-by: Michael Zoran <[email protected]>

ranj063 · 2019-01-01T02:07:41Z

The current driver does not implement all the recommended hardware setups

1. firmware download needs to be retried

2. power-gating and clock gating needs to be disabled during firmware download

3. some bits are not reprogrammed on resume

4. watchdog and recovery needed

5. delays after programming registers (and/or loops to check status changes)

6. set I2S as slave before enabling DSP

7. avoid DMA resume capability on capture

Adding a blanket bug to cover all these improvements. Filed as a bug since the current code is not robust enough.
@mengdonglin the ones that I checked are already done

commit 2753ca5 upstream. BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335 CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ thesofproject#87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335 tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline] genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fda9 RSP: 002b:00007ffd0c184ba8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fda9 RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 00000000004016d0 R13: 0000000000401760 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 In tipc_nl_compat_recv(), when the len variable returned by nlmsg_attrlen() is 0, the message is still treated as a valid one, which is obviously unresonable. When len is zero, it means the message not only doesn't contain any valid TLV payload, but also TLV header is not included. Under this stituation, tlv_type field in TLV header is still accessed in tipc_nl_compat_dumpit() or tipc_nl_compat_doit(), but the field space is obviously illegal. Of course, it is not initialized. Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

plbossart · 2019-03-24T18:25:00Z

@wenqingfu can we get someone assigned to this? We know our programming sequences don't fully follow recommended guidelines, let's fix those known opens, at least the opens 2, 5, 6 and keep watchdog/recovery and DAM resume capability aside.

plbossart · 2019-06-10T18:30:12Z

@zhuyingjiang can you clarify what remains to be done for this issue?

zhuyingjiang · 2019-06-11T06:05:57Z

@plbossart The remains are:
4. watchdog and recovery needed
7. avoid DMA resume capability on capture

The 5. #777 delays after programming registers (and/or loops to check status changes)
is almost been done after my PR #1020 #997 is merged.
Still there may need one more PR for "set DUM bit on device power up"

plbossart · 2020-01-09T00:58:00Z

we are not going to support DMA resume, so forking the firmware recovery as a separate issue #1675

Add Rust int param types

Fixes checkpatch issues: ERROR: code indent should use tabs where possible thesofproject#86: FILE: drivers/reset/reset-zynqmp.c:86: + .reset_id = 0,$ WARNING: please, no spaces at the start of a line thesofproject#86: FILE: drivers/reset/reset-zynqmp.c:86: + .reset_id = 0,$ ERROR: code indent should use tabs where possible thesofproject#87: FILE: drivers/reset/reset-zynqmp.c:87: + .num_resets = VERSAL_NR_RESETS,$ WARNING: please, no spaces at the start of a line thesofproject#87: FILE: drivers/reset/reset-zynqmp.c:87: + .num_resets = VERSAL_NR_RESETS,$ Signed-off-by: Philipp Zabel <[email protected]> Reviewed-by: Michal Simek <[email protected]>

Fixes checkpatch issues: CHECK: Alignment should match open parenthesis thesofproject#87: FILE: drivers/reset/core.c:87: +static int of_reset_simple_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) CHECK: Lines should not end with a '(' thesofproject#540: FILE: drivers/reset/core.c:540: +static struct reset_control *__reset_control_get_internal( CHECK: Alignment should match open parenthesis thesofproject#603: FILE: drivers/reset/core.c:603: +struct reset_control *__of_reset_control_get(struct device_node *node, + const char *id, int index, bool shared, CHECK: Alignment should match open parenthesis thesofproject#781: FILE: drivers/reset/core.c:781: +struct reset_control *__devm_reset_control_get(struct device *dev, + const char *id, int index, bool shared, Signed-off-by: Philipp Zabel <[email protected]>

During testing of f263a81 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's func[i]->aux->tail_call_reachable. However, in the case of the rejection check upon JIT failure, env->prog->aux->tail_call_reachable is used. func[0]->aux->tail_call_reachable which represents the main program's information did not propagate this to the outer env->prog->aux, though. Add this propagation into check_max_stack_depth() where it needs to belong so that the check can be done reliably. Fixes: ebf7d1f ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Fixes: e411901 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") Co-developed-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/bpf/618c34e3163ad1a36b1e82377576a6081e182f25.1626123173.git.daniel@iogearbox.net

If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) Cc: [email protected] Signed-off-by: Paul Aurich <[email protected]> Signed-off-by: Steve French <[email protected]>

plbossart added the bug Something isn't working label Aug 15, 2018

keqiaozhang added the P2 Critical bugs or normal features label Aug 21, 2018

mengdonglin added enhancement New feature or request and removed bug Something isn't working labels Sep 18, 2018

mengdonglin mentioned this issue Jan 1, 2019

[Stress] Random FW loading failure thesofproject/sof#785

Closed

mengdonglin added P1 Blocker bugs or important features and removed P2 Critical bugs or normal features labels Jan 1, 2019

plbossart mentioned this issue Nov 11, 2019

Merge/upstream merge 20191111 #1465

Merged

plbossart closed this as completed Jan 9, 2020

aiChaoSONG pushed a commit to aiChaoSONG/linux that referenced this issue May 6, 2021

Merge pull request thesofproject#87 from adamrk/rust-int-params

304ee69

Add Rust int param types

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Harden APL/GLK hardware support #87

Harden APL/GLK hardware support #87

plbossart commented Aug 15, 2018 •

edited by zhuyingjiang

Loading

mengdonglin commented Sep 18, 2018

ranj063 commented Jan 1, 2019

plbossart commented Mar 24, 2019

plbossart commented Jun 10, 2019

zhuyingjiang commented Jun 11, 2019

plbossart commented Jan 9, 2020

Harden APL/GLK hardware support #87

Harden APL/GLK hardware support #87

Comments

plbossart commented Aug 15, 2018 • edited by zhuyingjiang Loading

mengdonglin commented Sep 18, 2018

ranj063 commented Jan 1, 2019

plbossart commented Mar 24, 2019

plbossart commented Jun 10, 2019

zhuyingjiang commented Jun 11, 2019

plbossart commented Jan 9, 2020

plbossart commented Aug 15, 2018 •

edited by zhuyingjiang

Loading