1.The firmware contains partition_cfg_2M.toml,R3_706_dongle.bin and bl_factory_params_IoTKitA_32M.dts.(latest:v0.00.16,burning with 1.8.4 burning tool)
1.Beta: The firmware contains partition_cfg_2M.toml,R3_706_dongle.bin and bl_factory_params_IoTKitA_32M.dts.(latest:v0.00.16(Beta),burning with v1.8.4 burning tool)
1.Please refer to the doc in the Doc-Flash-Guide directory for flash burning guidance(If you are using Ubuntu or Mac OS, please use flash tool with 1.8.4 or 1.9.0 and pay attention to selecting the port and pressing pin to power on).
2.Please note that the beta version of Coordinatior firmware requires a burning tool of 1.9.0, while others require a burning tool of 1.8.4.
1. Support smart home platforms in Home Assistant, like Zigbee Home Automation and Zigbee2MQTT.
2. Base on BL706.
3. USB connected adapter.
4. Router(Beta).
BL706 based USB connected.
1. Work with Zigbee Home Automation: https://www.home-assistant.io/integrations/zha
2. Work with Zigbee2MQTT: https://www.zigbee2mqtt.io/guide/getting-started/
3. Router device(Beta,need to join the network).
1.link:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
‐ English: This device complies with Industry Canada license‐exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
‐ French:Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Cetéquipementestconforme Canada limitesd'exposition aux radiations dans un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.