Running Ubuntu 64 Bit On Arm RPI 5 fixit please! reply when done!

[jamieduk]

Running Ubuntu 64 Bit On Arm RPI 5 fixit please! reply when done!

jay@jnetreloaded:~/tor-browser/Secondtry/torbrowser-launcher-arm$ sudo apt install -y build-essential dh-python python3-all python3-stdeb python3-pyqt5 python3-gpg python3-requests python3-socks python3-packaging gnupg2 tor
./build_deb.sh
sudo dpkg -i deb_dist/torbrowser-launcher_*.deb
[sudo] password for jay:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
build-essential is already the newest version (12.10ubuntu1).
python3-gpg is already the newest version (1.18.0-4.1ubuntu4).
python3-gpg set to manually installed.
python3-requests is already the newest version (2.31.0+dfsg-1ubuntu1).
python3-socks is already the newest version (1.7.1+dfsg-1).
python3-socks set to manually installed.
python3-packaging is already the newest version (24.0-1).
python3-packaging set to manually installed.
tor is already the newest version (0.4.8.10-1build2).
The following additional packages will be installed:
apt-file autopoint debhelper debugedit dh-autoreconf dh-strip-nondeterminism
dwz intltool-debian libapt-pkg-perl libarchive-cpio-perl libdebhelper-perl
libfile-stripnondeterminism-perl libmail-sendmail-perl libqt5designer5
libqt5help5 libregexp-assemble-perl libsub-override-perl
libsys-hostname-long-perl po-debconf python3-pyqt5.sip
Suggested packages:
dh-make flit python3-build python3-installer libmail-box-perl
python3-all-dev
The following NEW packages will be installed
apt-file autopoint debhelper debugedit dh-autoreconf dh-python
dh-strip-nondeterminism dwz gnupg2 intltool-debian libapt-pkg-perl
libarchive-cpio-perl libdebhelper-perl libfile-stripnondeterminism-perl
libmail-sendmail-perl libqt5designer5 libqt5help5 libregexp-assemble-perl
libsub-override-perl libsys-hostname-long-perl po-debconf python3-all
python3-pyqt5 python3-pyqt5.sip python3-stdeb
0 to upgrade, 25 to newly install, 0 to remove and 2 not to upgrade.
Need to get 7,846 kB of archives.
After this operation, 29.9 MB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libapt-pkg-perl arm64 0.1.40build7 [67.0 kB]
Get:2 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 libregexp-assemble-perl all 0.38-2 [69.5 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 apt-file all 3.3 [25.9 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 autopoint all 0.21-14ubuntu2 [422 kB]
Get:5 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libdebhelper-perl all 13.14.1ubuntu5 [89.8 kB]
Get:6 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 dh-autoreconf all 20 [16.1 kB]
Ign:6 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 dh-autoreconf all 20
Get:7 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libsub-override-perl all 0.10-1 [10.0 kB]
Get:8 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [18.1 kB]
Get:9 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 dh-strip-nondeterminism all 1.13.1-1 [5,362 B]
Get:10 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 debugedit arm64 1:5.0-5build2 [45.3 kB]
Get:11 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 dwz arm64 0.15-1build6 [113 kB]
Get:12 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 intltool-debian all 0.35.0+20060710.6 [23.2 kB]
Get:13 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 po-debconf all 1.0.21+nmu1 [233 kB]
Get:14 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 debhelper all 13.14.1ubuntu5 [869 kB]
Get:15 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 dh-python all 6.20240401 [110 kB]
Get:16 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libarchive-cpio-perl all 0.10-3 [10.3 kB]
Get:17 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libsys-hostname-long-perl all 1.5-3 [10.6 kB]
Get:18 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 libmail-sendmail-perl all 0.80-3 [21.7 kB]
Get:19 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 libqt5designer5 arm64 5.15.13-1 [2,845 kB]
Get:20 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 libqt5help5 arm64 5.15.13-1 [165 kB]
Get:21 http://ports.ubuntu.com/ubuntu-ports noble-updates/main arm64 python3-all arm64 3.12.3-0ubuntu2 [886 B]
Get:22 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 python3-pyqt5.sip arm64 12.13.0-1build3 [64.0 kB]
Get:23 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 python3-pyqt5 arm64 5.15.10+dfsg-1build6 [2,557 kB]
Ign:23 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 python3-pyqt5 arm64 5.15.10+dfsg-1build6
Get:24 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 python3-stdeb all 0.10.0-2 [50.4 kB]
Get:25 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 gnupg2 all 2.4.4-2ubuntu17 [4,748 B]
Get:6 http://ports.ubuntu.com/ubuntu-ports noble/main arm64 dh-autoreconf all 20 [16.1 kB]
Get:23 http://ports.ubuntu.com/ubuntu-ports noble/universe arm64 python3-pyqt5 arm64 5.15.10+dfsg-1build6 [2,557 kB]
Fetched 7,109 kB in 5s (1,347 kB/s)
Selecting previously unselected package libapt-pkg-perl.
(Reading database ... 377744 files and directories currently installed.)
Preparing to unpack .../00-libapt-pkg-perl_0.1.40build7_arm64.deb ...
Unpacking libapt-pkg-perl (0.1.40build7) ...
Selecting previously unselected package libregexp-assemble-perl.
Preparing to unpack .../01-libregexp-assemble-perl_0.38-2_all.deb ...
Unpacking libregexp-assemble-perl (0.38-2) ...
Selecting previously unselected package apt-file.
Preparing to unpack .../02-apt-file_3.3_all.deb ...
Unpacking apt-file (3.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../03-autopoint_0.21-14ubuntu2_all.deb ...
Unpacking autopoint (0.21-14ubuntu2) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../04-libdebhelper-perl_13.14.1ubuntu5_all.deb ...
Unpacking libdebhelper-perl (13.14.1ubuntu5) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../05-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../06-libsub-override-perl_0.10-1_all.deb ...
Unpacking libsub-override-perl (0.10-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../07-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../08-dh-strip-nondeterminism_1.13.1-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.13.1-1) ...
Selecting previously unselected package debugedit.
Preparing to unpack .../09-debugedit_1%3a5.0-5build2_arm64.deb ...
Unpacking debugedit (1:5.0-5build2) ...
Selecting previously unselected package dwz.
Preparing to unpack .../10-dwz_0.15-1build6_arm64.deb ...
Unpacking dwz (0.15-1build6) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../11-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../12-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../13-debhelper_13.14.1ubuntu5_all.deb ...
Unpacking debhelper (13.14.1ubuntu5) ...
Selecting previously unselected package dh-python.
Preparing to unpack .../14-dh-python_6.20240401_all.deb ...
Unpacking dh-python (6.20240401) ...
Selecting previously unselected package libarchive-cpio-perl.
Preparing to unpack .../15-libarchive-cpio-perl_0.10-3_all.deb ...
Unpacking libarchive-cpio-perl (0.10-3) ...
Selecting previously unselected package libsys-hostname-long-perl.
Preparing to unpack .../16-libsys-hostname-long-perl_1.5-3_all.deb ...
Unpacking libsys-hostname-long-perl (1.5-3) ...
Selecting previously unselected package libmail-sendmail-perl.
Preparing to unpack .../17-libmail-sendmail-perl_0.80-3_all.deb ...
Unpacking libmail-sendmail-perl (0.80-3) ...
Selecting previously unselected package libqt5designer5:arm64.
Preparing to unpack .../18-libqt5designer5_5.15.13-1_arm64.deb ...
Unpacking libqt5designer5:arm64 (5.15.13-1) ...
Selecting previously unselected package libqt5help5:arm64.
Preparing to unpack .../19-libqt5help5_5.15.13-1_arm64.deb ...
Unpacking libqt5help5:arm64 (5.15.13-1) ...
Selecting previously unselected package python3-all.
Preparing to unpack .../20-python3-all_3.12.3-0ubuntu2_arm64.deb ...
Unpacking python3-all (3.12.3-0ubuntu2) ...
Selecting previously unselected package python3-pyqt5.sip.
Preparing to unpack .../21-python3-pyqt5.sip_12.13.0-1build3_arm64.deb ...
Unpacking python3-pyqt5.sip (12.13.0-1build3) ...
Selecting previously unselected package python3-pyqt5.
Preparing to unpack .../22-python3-pyqt5_5.15.10+dfsg-1build6_arm64.deb ...
Unpacking python3-pyqt5 (5.15.10+dfsg-1build6) ...
Selecting previously unselected package python3-stdeb.
Preparing to unpack .../23-python3-stdeb_0.10.0-2_all.deb ...
Unpacking python3-stdeb (0.10.0-2) ...
Selecting previously unselected package gnupg2.
Preparing to unpack .../24-gnupg2_2.4.4-2ubuntu17_all.deb ...
Unpacking gnupg2 (2.4.4-2ubuntu17) ...
Setting up dh-python (6.20240401) ...
Setting up libapt-pkg-perl (0.1.40build7) ...
Setting up gnupg2 (2.4.4-2ubuntu17) ...
Setting up libqt5designer5:arm64 (5.15.13-1) ...
Setting up libdebhelper-perl (13.14.1ubuntu5) ...
Setting up python3-all (3.12.3-0ubuntu2) ...
Setting up libqt5help5:arm64 (5.15.13-1) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up autopoint (0.21-14ubuntu2) ...
Setting up python3-pyqt5.sip (12.13.0-1build3) ...
Setting up dwz (0.15-1build6) ...
Setting up libarchive-cpio-perl (0.10-3) ...
Setting up debugedit (1:5.0-5build2) ...
Setting up libsub-override-perl (0.10-1) ...
Setting up libregexp-assemble-perl (0.38-2) ...
Setting up libsys-hostname-long-perl (1.5-3) ...
Setting up python3-pyqt5 (5.15.10+dfsg-1build6) ...
Setting up libfile-stripnondeterminism-perl (1.13.1-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up apt-file (3.3) ...
The system-wide cache is empty. You may want to run 'apt-file update'
as root to update the cache.
Setting up dh-autoreconf (20) ...
Setting up libmail-sendmail-perl (0.80-3) ...
Setting up dh-strip-nondeterminism (1.13.1-1) ...
Setting up debhelper (13.14.1ubuntu5) ...
Setting up python3-stdeb (0.10.0-2) ...
/usr/lib/python3/dist-packages/stdeb/util.py:1434: SyntaxWarning: invalid escape
sequence '.'
'http://pypi.debian.net/{name}/{name}-(.+)\.(?:zip|tgz|tbz|txz|(?:tar\.(?:gz|b
z2|xz)))').
Processing triggers for man-db (2.12.0-4build2) ...
Processing triggers for libc-bin (2.39-0ubuntu8.3) ...
rm: cannot remove 'build': No such file or directory
rm: cannot remove 'deb_dist': No such file or directory
/home/jay/tor-browser/Secondtry/torbrowser-launcher-arm/setup.py:39: DeprecationWarning: distro.linux_distribution() is deprecated. It should only be used as a compatibility shim with Python's platform.linux_distribution(). Please use distro.id(), distro.version() and distro.name() instead.
distro = distro.linux_distribution()[0]
Traceback (most recent call last):
File "/home/jay/tor-browser/Secondtry/torbrowser-launcher-arm/setup.py", line 99, in
setup(
File "/usr/lib/python3/dist-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/usr/lib/python3/dist-packages/setuptools/_distutils/dist.py", line 969, in run_commands
self.run_command(cmd)
File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 1233, in run_command
super().run_command(command)
File "/usr/lib/python3/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/stdeb/command/bdist_deb.py", line 34, in run
self.run_command('sdist_dsc')
File "/usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 1233, in run_command
super().run_command(command)
File "/usr/lib/python3/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/stdeb/command/sdist_dsc.py", line 30, in run
debinfo = self.get_debinfo()
^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/stdeb/command/common.py", line 197, in get_debinfo
debinfo = DebianInfo(
^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/stdeb/util.py", line 802, in init
check_cfg_files(cfg_files, module_name)
File "/usr/lib/python3/dist-packages/stdeb/util.py", line 733, in check_cfg_files
cfg = ConfigParser.SafeConfigParser()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
AttributeError: module 'configparser' has no attribute 'SafeConfigParser'. Did you mean: 'RawConfigParser'?

To install, run:
sudo dpkg -i deb_dist/torbrowser-launcher_0.3.7-1_all.deb
dpkg: error: cannot access archive 'deb_dist/torbrowser-launcher_*.deb': No such file or directory