From f2a6fbde3fe24fe111d40b3abf4e2fade9c27fcf Mon Sep 17 00:00:00 2001 From: Daniel_Doehring Date: Thu, 25 Jan 2024 12:26:13 +0100 Subject: [PATCH] Avoid hyperlink in doc --- docs/src/meshes/p4est_mesh.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/src/meshes/p4est_mesh.md b/docs/src/meshes/p4est_mesh.md index db75346cab3..63ca418081f 100644 --- a/docs/src/meshes/p4est_mesh.md +++ b/docs/src/meshes/p4est_mesh.md @@ -55,7 +55,7 @@ This heading is used to indicate to the mesh constructor which of the above mapp create a curvilinear mesh. If the Abaqus file header is **not** present then the `P4estMesh` is created with the first strategy above. -#### List of corner nodes +#### List of corner nodes Next, prefaced with `*NODE`, comes a list of the physical `(x,y,z)` coordinates of all the corners. The first integer in the list of the corners provides its id number. @@ -71,7 +71,7 @@ Thus, for the two-dimensional example mesh this block of corner information is 7, 3.0, -1.0, 0.0 ``` -#### List of elements +#### List of elements The element connectivity is given after the list of corners. The header for this information block is ``` @@ -237,7 +237,7 @@ For completeness, we provide the entire Abaqus mesh file for the example mesh in As an alternative to an Abaqus mesh generated by `HOHQMesh`, `.inp` files with boundary information encoded as nodesets `*NSET,NSET=` can be used to construct a `p4est` mesh. This is especially useful for usage of existing meshes (consisting of bilinear elements) which could stem from the popular [`gmsh`](https://gmsh.info/) meshing software. -In addition to the list of [nodes](#nodes) and [elements](#elements) given above, there are nodesets of the form +In addition to the list of nodes and elements given above, there are nodesets of the form ``` *NSET,NSET=PhysicalLine1 1, 4, 52, 53, 54, 55, 56, 57, 58,