OnLogic CL210 System

This is the base Nerves System configuration for an OnLogic CL210 system.

Feature	Description
CPU	1.1 GHz dual-core Intel Celeron N3350
Memory	4 GB 2133 MHz LPDDR4
Storage	32 GB eMMC Flash and MicroSD
Linux kernel	5.4.6
IEx terminal	ttyS0
UART	ttyS0
Display	Dual - Display port
Ethernet	Dual
Audio	Stereo out w/ mic in

Using

The most common way of using this Nerves System is create a project with mix nerves.new and to export MIX_TARGET=onlogic_cl210.

Then, change the x86_64 system dependency to {:nerves_system_onlogic_cl210, "~> 0.1", runtime: false, target: :onlogicv_cl210}

See the Getting started guide for more information.

If you need custom modifications to this system for your device, clone this repository and update as described in Making custom systems

Provisioning devices

This system supports storing provisioning information in a small key-value store outside of any filesystem. Provisioning is an optional step and reasonable defaults are provided if this is missing.

Provisioning information can be queried using the Nerves.Runtime KV store's Nerves.Runtime.KV.get/1 function.

Keys used by this system are:

Key	Example Value	Description
nerves_serial_number	"12345678"	By default, this string is used to create unique hostnames and Erlang node names. If unset, it defaults to part of the Ethernet adapter's MAC address.

The normal procedure would be to set these keys once in manufacturing or before deployment and then leave them alone.

For example, to provision a serial number on a running device, run the following and reboot:

iex> cmd("fw_setenv nerves_serial_number 12345678")

This system supports setting the serial number offline. To do this, set the NERVES_SERIAL_NUMBER environment variable when burning the firmware. If you're programming MicroSD cards using fwup, the commandline is:

sudo NERVES_SERIAL_NUMBER=12345678 fwup path_to_firmware.fw

Serial numbers are stored on the MicroSD card so if the MicroSD card is replaced, the serial number will need to be reprogrammed. The numbers are stored in a U-boot environment block. This is a special region that is separate from the application partition so reformatting the application partition will not lose the serial number or any other data stored in this block.

Additional key value pairs can be provisioned by overriding the default provisioning.conf file location by setting the environment variable NERVES_PROVISIONING=/path/to/provisioning.conf. The default provisioning.conf will set the nerves_serial_number, if you override the location to this file, you will be responsible for setting this yourself.