diff --git a/Backlog.txt b/Backlog.txt
new file mode 100644
index 0000000..1ced344
--- /dev/null
+++ b/Backlog.txt
@@ -0,0 +1,9 @@
+Configure IP-address
+Read S0
+Child for S0 output
+
+Support for gross / net usage when S0 is used
+Children for reading from P1
+Another nice feature would we if the gas usage can be retrieved
+Support for password
+Update frequentie instelbaar
\ No newline at end of file
diff --git a/D_Youless2.xml b/D_Youless2.xml
new file mode 100644
index 0000000..f44f3b6
--- /dev/null
+++ b/D_Youless2.xml
@@ -0,0 +1,34 @@
+<?xml version="1.0"?>
+<root xmlns="urn:schemas-upnp-org:device-1-0">
+  <specVersion>
+    <major>2</major>
+    <minor>0</minor>
+  </specVersion>
+  <device>
+    <deviceType>urn:schemas-micasaverde-com:device:PowerMeter:1</deviceType>
+    <Category_Num>21</Category_Num>
+    <friendlyName>YouLess Reader</friendlyName>
+    <manufacturer>YouLess</manufacturer>
+    <manufacturerURL>http://www.youless.com</manufacturerURL>
+    <modelDescription>YouLess energie monitor LS120</modelDescription>
+    <modelName>Youless</modelName>
+    <modelNumber>LS120</modelNumber>
+    <modelURL>http://www.youless.com</modelURL>
+    <serviceList>
+      <service>
+        <serviceType>urn:schemas-micasaverde-com:service:EnergyMetering:1</serviceType>
+        <serviceId>urn:micasaverde-com:serviceId:EnergyMetering1</serviceId>
+        <SCPDURL>S_EnergyMetering1.xml</SCPDURL>
+      </service>
+      <service>
+        <serviceType>urn:schemas-micasaverde-com:service:HaDevice:1</serviceType>
+        <serviceId>urn:micasaverde-com:serviceId:HaDevice1</serviceId>
+        <SCPDURL>S_HaDevice1.xml</SCPDURL>
+      </service>
+    </serviceList>
+    <implementationList>
+      <implementationFile>I_Youless2.xml</implementationFile>
+    </implementationList>
+    <staticJson>D_PowerMeter1.json</staticJson>
+  </device>
+</root>
diff --git a/I_Youless2.xml b/I_Youless2.xml
new file mode 100644
index 0000000..d8cdde5
--- /dev/null
+++ b/I_Youless2.xml
@@ -0,0 +1,12 @@
+<?xml version="1.0"?>
+<implementation>
+  <settings>
+    <protocol>crlf</protocol>
+	<handleChildren>1</handleChildren>
+</settings>
+  <files>L_Youless2.lua</files>
+  <startup>Youless_Init</startup>
+  <actionList>
+	  
+  </actionList>
+</implementation>
diff --git a/L_Youless2.lua b/L_Youless2.lua
new file mode 100644
index 0000000..b2ae37d
--- /dev/null
+++ b/L_Youless2.lua
@@ -0,0 +1,168 @@
+--[==[
+Module L_Youless2.lua
+Written by Vincent Pathuis (Vinx)
+Only support UI7
+V0.1 - 17 November 2019
+Initial version. 
+Support for LS110 & LS120
+Support for Watt & KWH
+Support for S0 Watt & KWH, optional as child device (LS120 only)
+
+Youless: http://youless.nl
+Uses YouLess API as described here: http://wiki.td-er.nl/index.php?title=YouLess
+
+--]==]
+
+local HA_SERVICE = "urn:micasaverde-com:serviceId:HaDevice1"
+local ENERGY_SERVICE = "urn:micasaverde-com:serviceId:EnergyMetering1"
+local YOULESS_SERVICE = "urn:youless-nl:serviceId:YouLess"
+local YOULESS_INTERVAL = 60
+local YOULESS_MODEL = ""
+local YOULESS_S0_ALTID = "YouLess_S0"
+local YOULESS_DEVICE = 0
+
+function findChild(parentDevice, label)
+    for k, v in pairs(luup.devices) do
+        if (v.device_num_parent == parentDevice and v.id == label) then
+            return k
+        end
+    end
+end
+
+local function readYouLess()
+    status,page = luup.inet.wget(YOULESS_URL_ACTUAL)
+
+    -- read pwr (watts)
+    local watts = string.match(page,'"pwr":(.-),')
+    if (watts ~= nil and watts ~= '') then
+        watts = tonumber(watts)
+        luup.variable_set(ENERGY_SERVICE, "Watts", watts, YOULESS_DEVICE)
+        luup.log("YouLess pwr (watts)="..watts)
+    else 
+        luup.log("Response from YouLess respons invalid: does not contain pwr")
+        luup.variable_set(HA_SERVICE,"CommFailure",1, YOULESS_DEVICE)
+    end
+
+    -- read cnt (kwh)
+    local kwh =  string.match(page,'"cnt":"(.-)"')
+    if (kwh ~= nil and kwh ~= '') then
+        kwh = string.gsub(kwh,",",".")
+        kwh = tonumber(kwh)
+        luup.variable_set(ENERGY_SERVICE,"KWH", kwh, YOULESS_DEVICE)
+        luup.log("YouLess kwh (cnt)=".. kwh)
+    else 
+        luup.log("Response from YouLess respons invalid: does not contain cnt")
+        luup.variable_set(HA_SERVICE,"CommFailure",1, YOULESS_DEVICE)
+    end
+
+    if (YOULESS_MODEL ~= "LS110") then -- following variables are not supported by LS110
+        childS0id = findChild(YOULESS_DEVICE, YOULESS_S0_ALTID)
+        if (childS0id ~= nil) then
+            luup.log("Child S0: " .. childS0id)
+        else
+            luup.log("No child S0 found")
+        end
+
+        -- read watts s0 (ps0)
+        local wattss0 = string.match(page,'"ps0":(.-),')
+        if (wattss0 ~= nil and wattss0 ~= '') then
+            wattss0 = tonumber(wattss0)
+            luup.log("YouLess ps0="..wattss0)
+            luup.variable_set(ENERGY_SERVICE, "Watts_S0", wattss0, YOULESS_DEVICE)
+            if ((childS0id or "") ~= "") then
+                luup.variable_set(ENERGY_SERVICE, "Watts", wattss0, childS0id)
+            end
+        else 
+            luup.log("No ps0 found")
+        end
+
+        -- read kwh s0 (cs0)
+        local kwhs0 =  string.match(page,'"cs0":"(.-)"')
+        if (kwhs0 ~= nil and kwhs0 ~= '') then
+            kwhs0 = string.gsub( kwhs0, "%s+", "")
+            kwhs0 = string.gsub(kwhs0,",",".")
+            kwhs0 = tonumber(kwhs0)
+            luup.variable_set(ENERGY_SERVICE,"KWH_S0", kwhs0, YOULESS_DEVICE)
+            if ((childS0id or "") ~= "") then
+                luup.variable_set(ENERGY_SERVICE, "KWH", kwhs0, childS0id)
+            end
+            luup.log("YouLess kwhs0=".. kwhs0)
+        else 
+            luup.log("No cs0 found")
+        end
+    end
+end
+
+function refreshCache()
+    readYouLess()
+    luup.call_timer("refreshCache", 1, YOULESS_INTERVAL, "")
+end
+
+function Youless_Init(youless_device)
+    luup.log("Starting YouLess2")
+    YOULESS_DEVICE = youless_device
+    YOULESS_IP = luup.attr_get('ip',YOULESS_DEVICE)
+    
+    if (YOULESS_IP == nil or YOULESS_IP == "") then
+        return false, "No IP specified. Visit the Advanced tab to specify the Youless ip-address and reload luup.", string.format("%s[%d]", luup.devices[YOULESS_DEVICE].description, youless_device)
+    end
+    
+    YOULESS_URL_ACTUAL = "http://" .. YOULESS_IP .. "/a?f=j"
+    YOULESS_URL_DEVICE = "http://" .. YOULESS_IP .. "/d"
+
+    -- check the connection
+    local status, page = luup.inet.wget(YOULESS_URL_ACTUAL)
+    if ((status or 0) ~= 0) then
+        return false, "Conntection to YouLess failed. Verify the Youless ip-address.", string.format("%s[%d]", luup.devices[YOULESS_DEVICE].description, YOULESS_DEVICE)
+    end
+
+    status,page = luup.inet.wget(YOULESS_URL_DEVICE)
+    if ((status or 0) ~= 0) then
+        YOULESS_MODEL = "LS110" -- device page not available, therefore assuming LS110
+        luup.variable_set(ENERGY_SERVICE, "Model", YOULESS_MODEL, YOULESS_DEVICE)
+        luup.log("YouLess model="..YOULESS_MODEL)
+    else 
+        local model = string.match(page,'"model":"(.-)",')
+        if (model ~= nil and model ~= '') then
+            YOULESS_MODEL = string.gsub( model, "%s+", "") 
+            luup.variable_set(ENERGY_SERVICE, "Model", YOULESS_MODEL, YOULESS_DEVICE)
+            luup.log("YouLess model="..YOULESS_MODEL)
+        else 
+            luup.log("Found device page, but failed to get model name")
+        end
+    end
+
+    luup.log("Youless found at " .. YOULESS_IP)
+
+    if ((YOULESS_MODEL or "") ~= "LS110") then
+        local ChildDeviceS0 = luup.variable_get(YOULESS_SERVICE, "ChildDeviceS0", YOULESS_DEVICE)
+        -- create variables if they don't exist
+        if ((ChildDeviceS0 or "") == "") then
+            luup.variable_set(YOULESS_SERVICE, "ChildDeviceS0", 0, YOULESS_DEVICE)
+        end
+
+        -- create child devices if needed
+        local child_devices = luup.chdev.start(YOULESS_DEVICE)
+        if (ChildDeviceS0 == "1") then
+            luup.log("Adding child device for YouLess S0")
+            local init=ENERGY_SERVICE .. ",ActualUsage=1\n" .. 
+                ENERGY_SERVICE .. ",Watts=0\n" .. 
+                ENERGY_SERVICE .. ",KWH=0\n"
+
+            luup.chdev.append(YOULESS_DEVICE, 
+                child_devices, -- handle
+                YOULESS_S0_ALTID, -- altid
+                "YouLess S0", -- device name
+                "", -- device_type, derived from the device file
+                "D_PowerMeter1.xml", -- device file for given device
+                "", -- Implementation file
+                init, -- initiating variables
+                true) -- embedded
+        end
+        luup.chdev.sync(YOULESS_DEVICE, child_devices)
+    end
+
+    readYouLess()
+    luup.set_failure(0, YOULESS_DEVICE)
+    luup.call_timer("refreshCache", 1, YOULESS_INTERVAL, "")
+end