% Foreign Function Interface
This guide will use the snappy
compression/decompression library as an introduction to writing bindings for
foreign code. Rust is currently unable to call directly into a C++ library, but
snappy includes a C interface (documented in
snappy-c.h).
Many of these examples use the libc crate, which provides various
type definitions for C types, among other things. If you’re trying these
examples yourself, you’ll need to add libc to your Cargo.toml:
[dependencies]
libc = "0.2.0"and add extern crate libc; to your crate root.
The following is a minimal example of calling a foreign function which will compile if snappy is installed:
# #![feature(libc)]
extern crate libc;
use libc::size_t;
#[link(name = "snappy")]
extern {
fn snappy_max_compressed_length(source_length: size_t) -> size_t;
}
fn main() {
let x = unsafe { snappy_max_compressed_length(100) };
println!("max compressed length of a 100 byte buffer: {}", x);
}The extern block is a list of function signatures in a foreign library, in
this case with the platform's C ABI. The #[link(...)] attribute is used to
instruct the linker to link against the snappy library so the symbols are
resolved.
Foreign functions are assumed to be unsafe so calls to them need to be wrapped
with unsafe {} as a promise to the compiler that everything contained within
truly is safe. C libraries often expose interfaces that aren't thread-safe, and
almost any function that takes a pointer argument isn't valid for all possible
inputs since the pointer could be dangling, and raw pointers fall outside of
Rust's safe memory model.
When declaring the argument types to a foreign function, the Rust compiler can not check if the declaration is correct, so specifying it correctly is part of keeping the binding correct at runtime.
The extern block can be extended to cover the entire snappy API:
# #![feature(libc)]
extern crate libc;
use libc::{c_int, size_t};
#[link(name = "snappy")]
extern {
fn snappy_compress(input: *const u8,
input_length: size_t,
compressed: *mut u8,
compressed_length: *mut size_t) -> c_int;
fn snappy_uncompress(compressed: *const u8,
compressed_length: size_t,
uncompressed: *mut u8,
uncompressed_length: *mut size_t) -> c_int;
fn snappy_max_compressed_length(source_length: size_t) -> size_t;
fn snappy_uncompressed_length(compressed: *const u8,
compressed_length: size_t,
result: *mut size_t) -> c_int;
fn snappy_validate_compressed_buffer(compressed: *const u8,
compressed_length: size_t) -> c_int;
}
# fn main() {}The raw C API needs to be wrapped to provide memory safety and make use of higher-level concepts like vectors. A library can choose to expose only the safe, high-level interface and hide the unsafe internal details.
Wrapping the functions which expect buffers involves using the slice::raw module to manipulate Rust
vectors as pointers to memory. Rust's vectors are guaranteed to be a contiguous block of memory. The
length is the number of elements currently contained, and the capacity is the total size in elements of
the allocated memory. The length is less than or equal to the capacity.
# #![feature(libc)]
# extern crate libc;
# use libc::{c_int, size_t};
# unsafe fn snappy_validate_compressed_buffer(_: *const u8, _: size_t) -> c_int { 0 }
# fn main() {}
pub fn validate_compressed_buffer(src: &[u8]) -> bool {
unsafe {
snappy_validate_compressed_buffer(src.as_ptr(), src.len() as size_t) == 0
}
}The validate_compressed_buffer wrapper above makes use of an unsafe block, but it makes the
guarantee that calling it is safe for all inputs by leaving off unsafe from the function
signature.
The snappy_compress and snappy_uncompress functions are more complex, since a buffer has to be
allocated to hold the output too.
The snappy_max_compressed_length function can be used to allocate a vector with the maximum
required capacity to hold the compressed output. The vector can then be passed to the
snappy_compress function as an output parameter. An output parameter is also passed to retrieve
the true length after compression for setting the length.
# #![feature(libc)]
# extern crate libc;
# use libc::{size_t, c_int};
# unsafe fn snappy_compress(a: *const u8, b: size_t, c: *mut u8,
# d: *mut size_t) -> c_int { 0 }
# unsafe fn snappy_max_compressed_length(a: size_t) -> size_t { a }
# fn main() {}
pub fn compress(src: &[u8]) -> Vec<u8> {
unsafe {
let srclen = src.len() as size_t;
let psrc = src.as_ptr();
let mut dstlen = snappy_max_compressed_length(srclen);
let mut dst = Vec::with_capacity(dstlen as usize);
let pdst = dst.as_mut_ptr();
snappy_compress(psrc, srclen, pdst, &mut dstlen);
dst.set_len(dstlen as usize);
dst
}
}Decompression is similar, because snappy stores the uncompressed size as part of the compression
format and snappy_uncompressed_length will retrieve the exact buffer size required.
# #![feature(libc)]
# extern crate libc;
# use libc::{size_t, c_int};
# unsafe fn snappy_uncompress(compressed: *const u8,
# compressed_length: size_t,
# uncompressed: *mut u8,
# uncompressed_length: *mut size_t) -> c_int { 0 }
# unsafe fn snappy_uncompressed_length(compressed: *const u8,
# compressed_length: size_t,
# result: *mut size_t) -> c_int { 0 }
# fn main() {}
pub fn uncompress(src: &[u8]) -> Option<Vec<u8>> {
unsafe {
let srclen = src.len() as size_t;
let psrc = src.as_ptr();
let mut dstlen: size_t = 0;
snappy_uncompressed_length(psrc, srclen, &mut dstlen);
let mut dst = Vec::with_capacity(dstlen as usize);
let pdst = dst.as_mut_ptr();
if snappy_uncompress(psrc, srclen, pdst, &mut dstlen) == 0 {
dst.set_len(dstlen as usize);
Some(dst)
} else {
None // SNAPPY_INVALID_INPUT
}
}
}Then, we can add some tests to show how to use them.
# #![feature(libc)]
# extern crate libc;
# use libc::{c_int, size_t};
# unsafe fn snappy_compress(input: *const u8,
# input_length: size_t,
# compressed: *mut u8,
# compressed_length: *mut size_t)
# -> c_int { 0 }
# unsafe fn snappy_uncompress(compressed: *const u8,
# compressed_length: size_t,
# uncompressed: *mut u8,
# uncompressed_length: *mut size_t)
# -> c_int { 0 }
# unsafe fn snappy_max_compressed_length(source_length: size_t) -> size_t { 0 }
# unsafe fn snappy_uncompressed_length(compressed: *const u8,
# compressed_length: size_t,
# result: *mut size_t)
# -> c_int { 0 }
# unsafe fn snappy_validate_compressed_buffer(compressed: *const u8,
# compressed_length: size_t)
# -> c_int { 0 }
# fn main() { }
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn valid() {
let d = vec![0xde, 0xad, 0xd0, 0x0d];
let c: &[u8] = &compress(&d);
assert!(validate_compressed_buffer(c));
assert!(uncompress(c) == Some(d));
}
#[test]
fn invalid() {
let d = vec![0, 0, 0, 0];
assert!(!validate_compressed_buffer(&d));
assert!(uncompress(&d).is_none());
}
#[test]
fn empty() {
let d = vec![];
assert!(!validate_compressed_buffer(&d));
assert!(uncompress(&d).is_none());
let c = compress(&d);
assert!(validate_compressed_buffer(&c));
assert!(uncompress(&c) == Some(d));
}
}Foreign libraries often hand off ownership of resources to the calling code. When this occurs, we must use Rust's destructors to provide safety and guarantee the release of these resources (especially in the case of panic).
For more about destructors, see the Drop trait.
Some external libraries require the usage of callbacks to report back their
current state or intermediate data to the caller.
It is possible to pass functions defined in Rust to an external library.
The requirement for this is that the callback function is marked as extern
with the correct calling convention to make it callable from C code.
The callback function can then be sent through a registration call to the C library and afterwards be invoked from there.
A basic example is:
Rust code:
extern fn callback(a: i32) {
println!("I'm called from C with value {0}", a);
}
#[link(name = "extlib")]
extern {
fn register_callback(cb: extern fn(i32)) -> i32;
fn trigger_callback();
}
fn main() {
unsafe {
register_callback(callback);
trigger_callback(); // Triggers the callback.
}
}C code:
typedef void (*rust_callback)(int32_t);
rust_callback cb;
int32_t register_callback(rust_callback callback) {
cb = callback;
return 1;
}
void trigger_callback() {
cb(7); // Will call callback(7) in Rust.
}In this example Rust's main() will call trigger_callback() in C,
which would, in turn, call back to callback() in Rust.
The former example showed how a global function can be called from C code. However it is often desired that the callback is targeted to a special Rust object. This could be the object that represents the wrapper for the respective C object.
This can be achieved by passing an raw pointer to the object down to the C library. The C library can then include the pointer to the Rust object in the notification. This will allow the callback to unsafely access the referenced Rust object.
Rust code:
#[repr(C)]
struct RustObject {
a: i32,
// Other members...
}
extern "C" fn callback(target: *mut RustObject, a: i32) {
println!("I'm called from C with value {0}", a);
unsafe {
// Update the value in RustObject with the value received from the callback:
(*target).a = a;
}
}
#[link(name = "extlib")]
extern {
fn register_callback(target: *mut RustObject,
cb: extern fn(*mut RustObject, i32)) -> i32;
fn trigger_callback();
}
fn main() {
// Create the object that will be referenced in the callback:
let mut rust_object = Box::new(RustObject { a: 5 });
unsafe {
register_callback(&mut *rust_object, callback);
trigger_callback();
}
}C code:
typedef void (*rust_callback)(void*, int32_t);
void* cb_target;
rust_callback cb;
int32_t register_callback(void* callback_target, rust_callback callback) {
cb_target = callback_target;
cb = callback;
return 1;
}
void trigger_callback() {
cb(cb_target, 7); // Will call callback(&rustObject, 7) in Rust.
}In the previously given examples the callbacks are invoked as a direct reaction to a function call to the external C library. The control over the current thread is switched from Rust to C to Rust for the execution of the callback, but in the end the callback is executed on the same thread that called the function which triggered the callback.
Things get more complicated when the external library spawns its own threads
and invokes callbacks from there.
In these cases access to Rust data structures inside the callbacks is
especially unsafe and proper synchronization mechanisms must be used.
Besides classical synchronization mechanisms like mutexes, one possibility in
Rust is to use channels (in std::sync::mpsc) to forward data from the C
thread that invoked the callback into a Rust thread.
If an asynchronous callback targets a special object in the Rust address space it is also absolutely necessary that no more callbacks are performed by the C library after the respective Rust object gets destroyed. This can be achieved by unregistering the callback in the object's destructor and designing the library in a way that guarantees that no callback will be performed after deregistration.
The link attribute on extern blocks provides the basic building block for
instructing rustc how it will link to native libraries. There are two accepted
forms of the link attribute today:
#[link(name = "foo")]#[link(name = "foo", kind = "bar")]
In both of these cases, foo is the name of the native library that we're
linking to, and in the second case bar is the type of native library that the
compiler is linking to. There are currently three known types of native
libraries:
- Dynamic -
#[link(name = "readline")] - Static -
#[link(name = "my_build_dependency", kind = "static")] - Frameworks -
#[link(name = "CoreFoundation", kind = "framework")]
Note that frameworks are only available on OSX targets.
The different kind values are meant to differentiate how the native library
participates in linkage. From a linkage perspective, the Rust compiler creates
two flavors of artifacts: partial (rlib/staticlib) and final (dylib/binary).
Native dynamic library and framework dependencies are propagated to the final
artifact boundary, while static library dependencies are not propagated at
all, because the static libraries are integrated directly into the subsequent
artifact.
A few examples of how this model can be used are:
-
A native build dependency. Sometimes some C/C++ glue is needed when writing some Rust code, but distribution of the C/C++ code in a library format is a burden. In this case, the code will be archived into
libfoo.aand then the Rust crate would declare a dependency via#[link(name = "foo", kind = "static")].Regardless of the flavor of output for the crate, the native static library will be included in the output, meaning that distribution of the native static library is not necessary.
-
A normal dynamic dependency. Common system libraries (like
readline) are available on a large number of systems, and often a static copy of these libraries cannot be found. When this dependency is included in a Rust crate, partial targets (like rlibs) will not link to the library, but when the rlib is included in a final target (like a binary), the native library will be linked in.
On OSX, frameworks behave with the same semantics as a dynamic library.
Some operations, like dereferencing raw pointers or calling functions that have been marked unsafe are only allowed inside unsafe blocks. Unsafe blocks isolate unsafety and are a promise to the compiler that the unsafety does not leak out of the block.
Unsafe functions, on the other hand, advertise it to the world. An unsafe function is written like this:
unsafe fn kaboom(ptr: *const i32) -> i32 { *ptr }This function can only be called from an unsafe block or another unsafe function.
Foreign APIs often export a global variable which could do something like track
global state. In order to access these variables, you declare them in extern
blocks with the static keyword:
# #![feature(libc)]
extern crate libc;
#[link(name = "readline")]
extern {
static rl_readline_version: libc::c_int;
}
fn main() {
println!("You have readline version {} installed.",
unsafe { rl_readline_version as i32 });
}Alternatively, you may need to alter global state provided by a foreign
interface. To do this, statics can be declared with mut so we can mutate
them.
# #![feature(libc)]
extern crate libc;
use std::ffi::CString;
use std::ptr;
#[link(name = "readline")]
extern {
static mut rl_prompt: *const libc::c_char;
}
fn main() {
let prompt = CString::new("[my-awesome-shell] $").unwrap();
unsafe {
rl_prompt = prompt.as_ptr();
println!("{:?}", rl_prompt);
rl_prompt = ptr::null();
}
}Note that all interaction with a static mut is unsafe, both reading and
writing. Dealing with global mutable state requires a great deal of care.
Most foreign code exposes a C ABI, and Rust uses the platform's C calling convention by default when calling foreign functions. Some foreign functions, most notably the Windows API, use other calling conventions. Rust provides a way to tell the compiler which convention to use:
# #![feature(libc)]
extern crate libc;
#[cfg(all(target_os = "win32", target_arch = "x86"))]
#[link(name = "kernel32")]
#[allow(non_snake_case)]
extern "stdcall" {
fn SetEnvironmentVariableA(n: *const u8, v: *const u8) -> libc::c_int;
}
# fn main() { }This applies to the entire extern block. The list of supported ABI constraints
are:
stdcallaapcscdeclfastcallvectorcallThis is currently hidden behind theabi_vectorcallgate and is subject to change.Rustrust-intrinsicsystemCwin64sysv64
Most of the abis in this list are self-explanatory, but the system abi may
seem a little odd. This constraint selects whatever the appropriate ABI is for
interoperating with the target's libraries. For example, on win32 with a x86
architecture, this means that the abi used would be stdcall. On x86_64,
however, windows uses the C calling convention, so C would be used. This
means that in our previous example, we could have used extern "system" { ... }
to define a block for all windows systems, not only x86 ones.
Rust guarantees that the layout of a struct is compatible with the platform's
representation in C only if the #[repr(C)] attribute is applied to it.
#[repr(C, packed)] can be used to lay out struct members without padding.
#[repr(C)] can also be applied to an enum.
Rust's owned boxes (Box<T>) use non-nullable pointers as handles which point
to the contained object. However, they should not be manually created because
they are managed by internal allocators. References can safely be assumed to be
non-nullable pointers directly to the type. However, breaking the borrow
checking or mutability rules is not guaranteed to be safe, so prefer using raw
pointers (*) if that's needed because the compiler can't make as many
assumptions about them.
Vectors and strings share the same basic memory layout, and utilities are
available in the vec and str modules for working with C APIs. However,
strings are not terminated with \0. If you need a NUL-terminated string for
interoperability with C, you should use the CString type in the std::ffi
module.
The libc crate on crates.io includes type aliases and function
definitions for the C standard library in the libc module, and Rust links
against libc and libm by default.
Certain Rust types are defined to never be null. This includes references (&T,
&mut T), boxes (Box<T>), and function pointers (extern "abi" fn()). When
interfacing with C, pointers that might be null are often used, which would seem to
require some messy transmutes and/or unsafe code to handle conversions to/from Rust types.
However, the language provides a workaround.
As a special case, an enum is eligible for the "nullable pointer optimization" if it contains
exactly two variants, one of which contains no data and the other contains a field of one of the
non-nullable types listed above. This means no extra space is required for a discriminant; rather,
the empty variant is represented by putting a null value into the non-nullable field. This is
called an "optimization", but unlike other optimizations it is guaranteed to apply to eligible
types.
The most common type that takes advantage of the nullable pointer optimization is Option<T>,
where None corresponds to null. So Option<extern "C" fn(c_int) -> c_int> is a correct way
to represent a nullable function pointer using the C ABI (corresponding to the C type
int (*)(int)).
Here is a contrived example. Let's say some C library has a facility for registering a callback, which gets called in certain situations. The callback is passed a function pointer and an integer and it is supposed to run the function with the integer as a parameter. So we have function pointers flying across the FFI boundary in both directions.
# #![feature(libc)]
extern crate libc;
use libc::c_int;
# #[cfg(hidden)]
extern "C" {
/// Registers the callback.
fn register(cb: Option<extern "C" fn(Option<extern "C" fn(c_int) -> c_int>, c_int) -> c_int>);
}
# unsafe fn register(_: Option<extern "C" fn(Option<extern "C" fn(c_int) -> c_int>,
# c_int) -> c_int>)
# {}
/// This fairly useless function receives a function pointer and an integer
/// from C, and returns the result of calling the function with the integer.
/// In case no function is provided, it squares the integer by default.
extern "C" fn apply(process: Option<extern "C" fn(c_int) -> c_int>, int: c_int) -> c_int {
match process {
Some(f) => f(int),
None => int * int
}
}
fn main() {
unsafe {
register(Some(apply));
}
}And the code on the C side looks like this:
void register(void (*f)(void (*)(int), int)) {
...
}No transmute required!
You may wish to compile Rust code in a way so that it can be called from C. This is fairly easy, but requires a few things:
#[no_mangle]
pub extern fn hello_rust() -> *const u8 {
"Hello, world!\0".as_ptr()
}
# fn main() {}The extern makes this function adhere to the C calling convention, as
discussed above in "Foreign Calling
Conventions". The no_mangle
attribute turns off Rust's name mangling, so that it is easier to link to.
It’s important to be mindful of panic!s when working with FFI. A panic!
across an FFI boundary is undefined behavior. If you’re writing code that may
panic, you should run it in a closure with catch_unwind():
use std::panic::catch_unwind;
#[no_mangle]
pub extern fn oh_no() -> i32 {
let result = catch_unwind(|| {
panic!("Oops!");
});
match result {
Ok(_) => 0,
Err(_) => 1,
}
}
fn main() {}Please note that catch_unwind() will only catch unwinding panics, not
those who abort the process. See the documentation of catch_unwind()
for more information.
Sometimes, a C library wants to provide a pointer to something, but not let you
know the internal details of the thing it wants. The simplest way is to use a
void * argument:
void foo(void *arg);
void bar(void *arg);We can represent this in Rust with the c_void type:
# #![feature(libc)]
extern crate libc;
extern "C" {
pub fn foo(arg: *mut libc::c_void);
pub fn bar(arg: *mut libc::c_void);
}
# fn main() {}This is a perfectly valid way of handling the situation. However, we can do a bit
better. To solve this, some C libraries will instead create a struct, where
the details and memory layout of the struct are private. This gives some amount
of type safety. These structures are called ‘opaque’. Here’s an example, in C:
struct Foo; /* Foo is a structure, but its contents are not part of the public interface */
struct Bar;
void foo(struct Foo *arg);
void bar(struct Bar *arg);To do this in Rust, let’s create our own opaque types with enum:
pub enum Foo {}
pub enum Bar {}
extern "C" {
pub fn foo(arg: *mut Foo);
pub fn bar(arg: *mut Bar);
}
# fn main() {}By using an enum with no variants, we create an opaque type that we can’t
instantiate, as it has no variants. But because our Foo and Bar types are
different, we’ll get type safety between the two of them, so we cannot
accidentally pass a pointer to Foo to bar().