csim.md

Vitis™ Hardware Acceleration Tutorials See Vitis™ Development Environment on xilinx.com

In this Section: Youw will be executing main to functionally verify the tsp function.

Run the Vitis HLS C Simulation

As discussed, the testbench file is visible on the left-hand side of the Vitis HLS GUI, from the Explorer pane: proj->TestBench with the file, tsp_TB.cpp. Inside the tesbench, you see that city coordinates are converted to distances.

City coordinates:

  const Coord cities[] = {{40.7127837, -74.0059413 },
                          {34.0522342, -118.2436849},
                          {41.8781136, -87.6297982 },
                          {29.7604267, -95.3698028 },
                          ...

Calculation for distances (as previously discussed, these numbers are normalized to integers before feeding them into the tsp accelerator function):

float dist = std::sqrt(
                       std::pow(cities[i].x-cities[j].x, 2)
                     + std::pow(cities[i].y-cities[j].y, 2)
                      );

The testbench sends 16-bit (uint16_t) data types transcoded from floating-point for efficient hardware processing:

// Normalizing distances to get the maximum precision on 16-bit integers
uint16_t maxUint = std::numeric_limits<uint16_t>::max();
for ( int i = 0; i < N*N; ++i ) {
  cout << "Distance (fp32): " << distances[i] << " Norm. (uint16): " << (uint16_t)((distances[i]/maxDist) * maxUint);
  inputDistances.write((distances[i]/maxDist) * maxUint);
}

Before running the simulation, open the tsp.h file, and examine the number of cities (N=5). To begin with, you will use only a few cities to allow the simulation to complete quickly. In the next lab, you will set the number of cities to 13 for synthesis. You can open the tsp.h file in the Vitis HLS GUI from the tsp.cpp file by holding the mouse over the #include "tsp.h" line and pressing the CTRL key while clicking the mouse.

IMPORTANT: Reducing the value of N for simulation is important, or your simulations will take considerable time to run.

To run the simulation from the Vitis HLS GUI, point to the upper toolbar of the Vitis HLS GUI, and locate the green 'play' icon, , and from its drop-down menu, select C simulation.

You can also alternatively use the main menu: Project -> Run C Simulation When the C simulation dialog comes up, simple click OK. After the C simulation, the Vitis HLS GUI will look like this:

As you see on the screenshot above, the result is 75662 (scaled integer) or 51.6494. It matches the pre-computed result stored in the testbench.

Next

• Run the C Synthesis

_{Copyright © 2020–2023 Advanced Micro Devices, Inc}

^{Terms and Conditions}