DS3231 high precision I2C RTC library for Arduino

This is a DS3231 high precision I2C RTC library for Arduino.

Library features

libc <time.h> compatible
Read/write date/time struct tm
Set/get Unix epoch UTC time_t
Set/get time (hour, min, sec)
Set/get date and time (hour, min, sec, mday, mon, year, wday)
Read temperature (0.25 degree resolution)
Alarm 1 (second/minute/hour/day/date match)
Alarm 2 (minute/hour/day/date match)
Polling and Alarm INT/SQW interrupt pin
Control 32kHz out signal (enable/disable)
Control SQW signal (disable / 1 / 1024 / 4096 / 8192Hz)
Configure aging offset
Serial terminal interface
Full RTC register access
Set date/time over serial with Python script

Hardware

Any Arduino hardware with a TWI interface and Wire.h support.

ESP32 notes

ESP32 problem: The Arduino IDE | Board manager installs an old version 1.0.0 from https://dl.espressif.com/dl/package_esp32_index.json which contains a broken I2C repeated start. Generating a repeated start with Wire.endTransmission(false); results in reading zero's from any I2C device and is not a problem of this library.

Solution: Use the Git master branch (or a newer release when available) to solve this problem as described on: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/windows.md.

Pins

Pins board - DS3231	VCC	GND	SDA	SCL	SQW
Arduino UNO (ATMega328 boards)	5V	GND	A4	A5	D2 (INT0)
Arduino Mega2560	5V	GND	D20	D21	D2 (INT4)
Arduino Leonardo	5V	GND	D2	D3	D7 (INT6)
Arduino DUE (ATSAM3X8E)	3V3	GND	20	21	2
ESP8266	3V3	GND	GPIO4 (D2)	GPIO5 (D1)	GPIO0 (D3)
ESP32	3V3	GND	GPIO21	GPIO22	GPIO0

Note: Tested ESP8266 / ESP32 boards:

ESP8266 boards: ESP12F / WeMos D1 & R2 / Node MCU v2 / v3
ESP32 boards: WeMos LOLIN32 / LOLIN D32

Other unlisted MCU's may work, but are not tested.

Examples

Arduino IDE | Examples | Erriez DS3231 RTC:

AgingOffset Aging offset programming
AlarmInterrupt Alarm with interrupts
AlarmPolling Alarm polled
DumpRegisters Dump registers polled
SetBuildDateTime Set build date/time
SetGetDateTime Simple RTC read date/time example
SetGetTime Set/Get time
SQWInterrupt Blink LED on SQW interrupt pin
Temperature Temperature
Terminal Advanced terminal interface with set date/time Python script
Test Regression test
WriteRead Write/read struct tm

Documentation

Doxygen online HTML
Doxygen PDF
DS3231 datasheet

Usage

Initialization

#include <Wire.h>
#include <ErriezDS3231.h>

// Create RTC object
ErriezDS3231 rtc;

void setup()
{
    // Initialize TWI with a 100kHz (default) or 400kHz clock
    Wire.begin();
    Wire.setClock(400000);
    
    // Initialize RTC
    while (!rtc.begin()) {
        // Error: Could not detect DS3231 RTC, retry after some time
        delay(3000);
    }
}

Check oscillator status at startup

// Check oscillator status
if (rtc.isOscillatorStopped()) {
    // Error: RTC oscillator stopped. Date/time cannot be trusted. 
    // Set new date/time before reading date/time.

    // Enable oscillator
    rtc.clockEnable(true);
}

Set time

// Write time to RTC
if (!rtc.setTime(12, 0, 0)) {
    // Error: Set time failed
}

Get time

uint8_t hour;
uint8_t minute;
uint8_t second;

// Read time from RTC
if (!rtc.getTime(&hour, &minute, &second)) {
    // Error: RTC read failed
}

Set date and time

// Write RTC date/time: 13:45:09  31 December 2019  0=Sunday, 2=Tuesday
if (!rtc.setDateTime(13, 45, 9,  31, 12, 2019,  2) {
    // Error: RTC write failed
}

Get date and time

uint8_t hour;
uint8_t min;
uint8_t sec;
uint8_t mday;
uint8_t mon;
uint16_t year;
uint8_t wday;

// Read RTC date/time
if (!rtc.getDateTime(&hour, &min, &sec, &mday, &mon, &year, &wday) {
    // Error: RTC read failed
}

// hour: 0..23
// min: 0..59
// sec: 0..59
// mday: 1..31
// mon: 1..12
// year: 2000..2099
// wday: 0..6 (0=Sunday .. 6=Saturday)

Write date/time struct tm

struct tm dt;

dt.tm_hour = 12;
dt.tm_min = 34;
dt.tm_sec = 56;
dt.tm_mday = 29;
dt.tm_mon = 1; // 0=January
dt.tm_year = 2020-1900;
dt.tm_wday = 6; // 0=Sunday

if (!rtc.write(&dt)) {
    // Error: RTC Read failed
}

Read date/time struct tm

struct tm dt;

// Read RTC date/time
if (!rtc.read(&dt)) {
    // Error: RTC read failed
}

Read Unix Epoch UTC

time_t t;

// Read Unix epoch UTC from RTC
if (!rtc.getEpoch(&t)) {
    // Error: RTC read failed
}

Write Unix Epoch UTC

// Write Unix epoch UTC to RTC
if (!rtc.setEpoch(1599416430UL)) {
    // Error: Set epoch failed
}

Get temperature

int8_t temperature = 0;
uint8_t fraction = 0;

// Force temperature conversion
// Without this call, it takes 64 seconds before the temperature is updated.
if (!rtc.startTemperatureConversion()) {
    // Error: Start temperature conversion failed 
}

// Read temperature
if (!rtc.getTemperature(&temperature, &fraction)) {
    // Error: Get temperature failed
}

// Print temperature. The output below is for example: 28.25C
Serial.print(temperature);
Serial.print(F("."));
Serial.print(fraction);
Serial.println(F("C"));

Program Alarm 1

Note: Alarm 1 and Alarm 2 have different behavior. Please refer to the documentation which Alarm1Type and Alarm2Type are supported. Some examples:

// Generate alarm 1 every second
rtc.setAlarm1(Alarm1EverySecond, 0, 0, 0, 0);

// Generate alarm 1 every minute and second match
rtc.setAlarm1(Alarm1EverySecond, 0, 0, 45, 30);

// Generate alarm 1 every day, hour, minute and second match
rtc.setAlarm1(Alarm1MatchDay, 
              1,  // Alarm day match (1 = Monday)
              12, // Alarm hour match
              45, // Alarm minute match
              30  // Alarm second match
);

Program Alarm 2

// Generate alarm 2 every minute
rtc.setAlarm2(Alarm2EveryMinute, 0, 0, 0);

// Generate alarm 2 every hour, minute match
rtc.setAlarm2(Alarm2MatchHours, 0, 23, 59);

// Generate alarm 2 every date, hour, minute match
rtc.setAlarm2(Alarm2MatchDate, 28, 7, 0);

Alarm polling

Note: The INT pin changes to low when an Alarm 1 or Alarm 2 match occurs and and the interrupt is enabled. The pin remains low until both alarm flags are cleared by the application.

// Poll alarm 1 flag
if (rtc.getAlarmFlag(Alarm1)) {
    // Handle Alarm 1
    
    // Clear alarm 1 flag
	rtc.clearAlarmFlag(Alarm1);
}

// Poll alarm 2 flag
if (rtc.getAlarmFlag(Alarm2)) {
    // Handle Alarm 2
    
    // Clear alarm 2 flag
	rtc.clearAlarmFlag(Alarm2);
}

Alarm interrupt

Note: Enabling interrupt will disable the SQW output signal.

// Uno, Nano, Mini, other 328-based: pin D2 (INT0) or D3 (INT1)
#define INT_PIN     2

// Alarm interrupt flag must be volatile
volatile bool alarmInterrupt = false;


#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
ICACHE_RAM_ATTR
#endif
void alarmHandler()
{
    // Set global interrupt flag
    alarmInterrupt = true;
}

void setup()
{
    ...

    // Attach to INT0 interrupt falling edge
    pinMode(INT_PIN, INPUT_PULLUP);
    attachInterrupt(digitalPinToInterrupt(INT_PIN), alarmHandler, FALLING);
    
    // Enable Alarm 1 and 2 interrupts
    rtc.alarmInterruptEnable(Alarm1, true);
    rtc.alarmInterruptEnable(Alarm2, true);
}

void loop()
{
    // Check global alarm interrupt flag
    if (alarmInterrupt) {
        if (rtc.getAlarmFlag(Alarm1)) {
            // Handle alarm 1
            
            // Clear alarm 1 interrupt
            rtc.clearAlarmFlag(Alarm1);
        }
        
        if (rtc.getAlarmFlag(Alarm2)) {
            // Handle alarm 2
            
            // Clear alarm 2 interrupt
            rtc.clearAlarmFlag(Alarm2);
        }
    }
}

32kHz clock out

Enable or disable 32kHz output pin.

rtc.outputClockPinEnable(true);  // Enable 
rtc.outputClockPinEnable(false);	// Disable

Square Wave Out (SQW)

Note: Enabling SQW pin will disable the alarm INT signal.

rtc.setSquareWave(SquareWaveDisable);	// Disable
rtc.setSquareWave(SquareWave1Hz);		// 1Hz
rtc.setSquareWave(SquareWave1024Hz);	// 1024Hz
rtc.setSquareWave(SquareWave4096Hz);	// 4096Hz
rtc.setSquareWave(SquareWave8192Hz);	// 8192Hz

API changes v1.0.1 to v2.0.0

The API has been changed to make RTC libraries compatible with libc time.h. This makes it easier to calculate with date/time and port the application to different platforms. See changes below:

v1.0.1	v2.0.0
`DS3231_DateTime`	`struct tm`
Function returns `true`: failure	Function returns `false`: failure
	`clearOscillatorStopFlag()` merged into `oscillatorEnable()`
`setDateTime()`	`bool write(struct tm *dt)`
`getDateTime()`	`bool read(struct tm *dt)`
`getEpochTime()`	`time_t getEpoch()`
	`bool setEpoch(time_t t)`
	`void setDateTime(uint8_t hour, uint8_t min, uint8_t sec, uint8_t mday, uint8_t mon, uint16_t year, uint8_t wday)`
	`void getDateTime(uint8_t hour, uint8_t min, uint8_t sec, uint8_t mday, uint8_t mon, uint16_t year, uint8_t *wday)`
`ErriezDS3231Debug`	class removed to reduce flash size

Library dependencies

Wire.h
Terminal.ino requires ErriezSerialTerminal library.

Library installation

Please refer to the Wiki page.

More Arduino Libraries from Erriez

Erriez Libraries

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

DS3231 high precision I2C RTC library for Arduino

Library features

Hardware

ESP32 notes

Pins

Examples

Documentation

Usage

API changes v1.0.1 to v2.0.0

Library dependencies

Library installation

More Arduino Libraries from Erriez

Files

README.md

Latest commit

History

README.md

File metadata and controls

DS3231 high precision I2C RTC library for Arduino

Library features

Hardware

ESP32 notes

Pins

Examples

Documentation

Usage

API changes v1.0.1 to v2.0.0

Library dependencies

Library installation

More Arduino Libraries from Erriez