Skip to content

Latest commit

 

History

History
93 lines (66 loc) · 3.24 KB

Installation_Eye.md

File metadata and controls

93 lines (66 loc) · 3.24 KB
Raw

SD card installation

To bootstrap network discovery and Ansible access, the default RaspbianOS image is modified with the bash script in scripts/prepare_raspbian_eyestalk_image.bash. It copies files required for the initial services, enables ssh, copies ssh keys and sets default passwords.

Running the script will require sudo, as does flashing to SD card. When flashing with the official flasher, make sure not to modify any of the configuration there as it may override changes made by us.

Discovery of Pi

Ansible setup

From a linux machine with ansible installed, run the following from outside the BeholderPi/ansible directory (ansible does not like running from the working directory containing the playbook).

ansible-playbook ansible/install_eye.yml --private-key ~/.ssh/id_beholderpi --inventory ansible/inventory-local --extra-vars "@ansible/vars_eyes-local.yml" --limit new_eyes

What the Script does

RaspberryIS Buster is distributed with SSH is disabled by default. To enable, an (empty) ssh file needs to be present in the /boot partition

See this blog post for details.

Add beholderpi key to the known_known hosts of all devices, including spectator and beholder

Network

The spectator RaspberryPi acts as DNS and DCHP server for all hosts on the 10.0.0.* network. It serves with the dnsmasq package.

TODO: Make a template of the spectator dhcpcd.conf and dnsmasq.conf.

  • apt install dnsmasq

Security

  • copy ssh keys
  • prevent/allow password authentication

Network discovery

To facilitate host discovery by the master beholder instance in an unknown network environment (external DHCP? static IPs?), the nodes run a systemd service broadcasting UDP on port 50101 with messages containing IP and hostname (IP:hostname, though IP is strictly not needed and known from the socket connection).

The system running Ansible can then take over given a list of ssh-enabled hosts and apply their roles (including adjusting the hostnames).

Discovery Sender setup

This requires copying the beholder_discovery_sender.py files to the home directory of the pi user, the beholder_discovery_sender.service to /etc/systemd/system as well as enabling the systemd unit file to launch on reboot by creating a symlink to it in /etc/systemd/multi-user.target.wants. Upon reboot the script will continuously broadcast at ~ 3s intervals.

The machine running Ansible now only has to listen on UDP port 50101 to discover client addresses to include as hosts.

Discovery Receiver setup

Just launch the scripts/services/discovery/beholder_discovery_reciever.py script.

Ansible Playbooks

The following tasks are required:

Eyes

Network configuration

  • set up hostname and configuration (e.g. network)

Launch the ansible/setup/network playbook

For more detail see (Networking.md)[Networking.md]

Basic packages

  • install packages (python3, ntp, camera, git, vim, htop, byobu)

Telemetry

  • install and configure telemetry (telegraf)

BeholderPi code

  • clone and install BeholderPi repository
  • install service for camera feed
  • update any service affected by new code (discovery, streaming)