From f8feef1ad55cc9353cf6a05679346edc4d2cb2a8 Mon Sep 17 00:00:00 2001 From: Krzysiek Egzmont Date: Sat, 30 Dec 2023 20:15:22 +0100 Subject: [PATCH] Refactor --- Makefile | 12 ++++++------ README.md | 17 ++++++++--------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/Makefile b/Makefile index 5d4c68a10..00e49d8f4 100644 --- a/Makefile +++ b/Makefile @@ -3,12 +3,6 @@ # 0 = disable # 1 = enable -# ---- COMPILER/LINKER OPTIONS ---- -ENABLE_CLANG ?= 0 -ENABLE_SWD ?= 0 -ENABLE_OVERLAY ?= 0 -ENABLE_LTO ?= 1 - # ---- STOCK QUANSHENG FERATURES ---- ENABLE_UART ?= 1 ENABLE_AIRCOPY ?= 0 @@ -52,6 +46,12 @@ ENABLE_AM_FIX_SHOW_DATA ?= 0 ENABLE_AGC_SHOW_DATA ?= 0 ENABLE_UART_RW_BK_REGS ?= 0 +# ---- COMPILER/LINKER OPTIONS ---- +ENABLE_CLANG ?= 0 +ENABLE_SWD ?= 0 +ENABLE_OVERLAY ?= 0 +ENABLE_LTO ?= 1 + ############################################################# TARGET = firmware diff --git a/README.md b/README.md index 9f4de2bbc..3fa203dc3 100644 --- a/README.md +++ b/README.md @@ -80,12 +80,7 @@ You'll find the options at the top of "Makefile" ('0' = disable, '1' = enable) . |Build option | Description | | --- | ---- | -|----- **COMPILER/LINKER OPTIONS**|| -| ENABLE_CLANG | **experimental, builds with clang instead of gcc (LTO will be disabled if you enable this) | -| ENABLE_SWD | only needed if using CPU's SWD port (debugging/programming) | -| ENABLE_OVERLAY | cpu FLASH stuff, not needed | -| ENABLE_LTO | reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this) | -|----- **STOCK QUANSHENG FERATURES**|| +|🧰 **STOCK QUANSHENG FERATURES**|| | ENABLE_UART | without this you can't configure radio via PC ! | | ENABLE_AIRCOPY | easier to just enter frequency with butts | | ENABLE_FMRADIO | WBFM VHF broadcast band receiver | @@ -97,7 +92,7 @@ You'll find the options at the top of "Makefile" ('0' = disable, '1' = enable) . | ENABLE_PWRON_PASSWORD | power-on password stuff | | ENABLE_DTMF_CALLING | DTMF calling fuctionality, sending calls, receiving calls, group calls, contacts list etc. | | ENABLE_FLASHLIGHT | enable top flashlight LED (on, blink, SOS) | -|----- **CUSTOM MODS**|| +|🧰 **CUSTOM MODS**|| | ENABLE_BIG_FREQ | big font frequencies (like original QS firmware) | | ENABLE_SMALL_BOLD | bold channel name/no. (when name + freq channel display mode) | | ENABLE_CUSTOM_MENU_LAYOUT | changes how the menu looks like | @@ -122,11 +117,15 @@ You'll find the options at the top of "Makefile" ('0' = disable, '1' = enable) . | ENABLE_BYP_RAW_DEMODULATORS | additional BYP (bypass?) and RAW demodulation options, proved not to be very useful, but it is there if you want to experiment | | ENABLE_BLMIN_TMP_OFF | additional function for configurable buttons that toggles `BLMin` on and off wihout saving it to the EEPROM | | ENABLE_SCAN_RANGES | scan range mode for frequency scanning, see wiki for instructions (radio operation -> frequency scanning) | -|----- **DEBUGGING** || +|🧰 **DEBUGGING** || | ENABLE_AM_FIX_SHOW_DATA| displays settings used by AM-fix when AM transmission is received | | ENABLE_AGC_SHOW_DATA | displays AGC settings | | ENABLE_UART_RW_BK_REGS | adds 2 extra commands that allow to read and write BK4819 registers | - +|🧰 **COMPILER/LINKER OPTIONS**|| +| ENABLE_CLANG | **experimental, builds with clang instead of gcc (LTO will be disabled if you enable this) | +| ENABLE_SWD | only needed if using CPU's SWD port (debugging/programming) | +| ENABLE_OVERLAY | cpu FLASH stuff, not needed | +| ENABLE_LTO | reduces size of compiled firmware but might break EEPROM reads (OVERLAY will be disabled if you enable this) | ## Compiler